• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.05a
• /
• pp.325-328
• /
• 2008

This paper presents a new conceptual electromagnetic induction eddy current-based stainless steel plate spiral type heater for heat exchanger or dual packs Heater in hot water system boiler steamer and super heated steamer, which is more suitable and acceptable for new generation consumer power applications. In addition, an active clamped quasi resonant PWM high frequency inverter using trench gate IGBTs power module can operate under a principle of zero voltage soft commutation with PWM is developed and demonstrated fora high efficient induction heated hot water system and boiler in the consumer power applications This consumer induction heater power appliance using active clamp soft switching PWM high-frequency inverter is evaluated and discussed on the basis of the simulation and experimental results.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.480-484
• /
• 2002

A new active lossless snubber for half-bridge dual converter(that is called 'dual converter') is proposed in this paper. It features soft switching(ZVS) as well as turn-off snubbing in both main and auxiliary switches. As it uses parasitic components, such as leakage inductances and switch output capacitances etc, it helps the dual converter to operate at the higher frequency with a higher efficiency and smaller size reactive components. The operational principle, theoretical analysis, and design consideration are presented. To confirm the operation, features and validity of the proposed circuit, simulated results from an 1kW, 24V/DC-250V/DC are presented.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.54 no.6
• /
• pp.294-302
• /
• 2005

PV system's islanding occurs when the uitilty grid is removed but local sources continue to operate and provide power to local loads. Islanding is one of the serious problems in an electric power system connected with dispersed power sources. Also, this can present safety hazards and the possibility of damage to other electric equipments. If the real and reactive power of RLC load and PV system are closely matched, islanding detection by passive methods becomes difficult. This paper shows the simulation and comparision for the previous active methods and novel islanding detection method using frequency drift is proposed for grid-connected PV system.

• IE interfaces
• /
• v.25 no.2
• /
• pp.153-162
• /
• 2012

The reliability is defined as a probability that a system will operate properly for a specified period of time under the design operating conditions without failure and it has been considered as one of the major design parameters in the field of industries. Reliability-Redundancy Optimization Problem(RROP) involves selec tion of components with multiple choices and redundancy levels for maximizing system reliability with constraints such as cost, weight, etc. However, in practice both active and cold standby redundancies may be used within a particular system design. Therefore, a redundancy strategy(active, cold standby) for each subsystem in order to maximize system reliability is considered in this study. Due to the nature of RROP, i.e. NP-hard problem, A Parallel Particle Swarm Optimization(PPSO) algorithm is proposed to solve the mathematical programming model and it gives consistently better quality solutions than existing studies for benchmark problems.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.5
• /
• pp.1592-1601
• /
• 2014

In this study, a novel single phase soft switched power factor correction (PFC) converter is developed with active snubber cell. The active snubber cell provides boost switch both to turn on with zero voltage transition (ZVT) and to turn off with zero current transition (ZCT). As the switching losses in the proposed converter are too low, L and C size can be reduced by increasing the operating frequency. Also, all the semiconductor devices operate with soft switching. There is no additional voltage stress in the boost switch and diode. The proposed converter has a simple structure, low cost and ease of control as well. It has a simple control loop to achieve near unity power factor with the aid of the UC3854. In this study, detailed steady state analysis of the proposed converter is presented and this theoretical analysis is verified by a prototype of 100 kHz and 500 W converter. The measured power factor and efficiency are 0.99 and 97.9% at full load.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.26 no.1
• /
• pp.9-15
• /
• 2021

In multi-string light-emitting diode (LED) driver system, current balancing is crucial because the brightness of LED is directly related to its forward current. This paper presents a novel LED current balancing topology using current-fed Z-source converter. With the proposed structure, currents flowing through two LED strings are automatically balanced owing to the charge-balance condition on capacitors. Operation of the proposed converter is simple and the proposed converter uses only one active switch and one diode. Moreover, low-side gate driving can be used to operate the active switch. To verify the operation of the proposed LED current balancing converter, a prototype is built and tested with different numbers of LEDs.

• Journal of Advanced Navigation Technology
• /
• v.24 no.1
• /
• pp.9-15
• /
• 2020

Recently, active electronically scanned array (AESA) radar, electro-optical and infrared (EO-IR) and infra-red search and track (IRST) sensors are under development in the Korean fighter experimental(KF-X) project, and AESA radar is currently undergoing preliminary research for flight testing. This paper focuses on the flying test bed (FTB) aircraft operation cases of developed countries in accordance with AESA radar development. As a result, we review domestic laws and regulations related to the airworthiness for FTB aircraft to operate in domestic environment and look for ways to operate FTB aircraft. Therefore, we propose how to selecting, airworthiness and operating FTB aircraft suitable for the domestic environment.

• Journal of Arbitration Studies
• /
• v.24 no.2
• /
• pp.53-80
• /
• 2014

This article focuses on the Active Plan for Alternative Dispute Resolution(ADR) in financial Dispute. The financial consumers of Korea had suffered greatly from the IMF in 1997 and the global financial crisis in 2008, which also increased financial conflicts significantly. In particular, active financial transaction, due to the development of computer and financial techniques causes frequent consumer financial conflicts. It is beneficial to settle them for judicial economy through an alternative conflict arbitration system instead of lawsuit at the court. Many advanced countries settle financial conflicts through various ADR in their numerous financial conflicts. In the settlement of financial conflict, the ADR system, covering mediation and arbitration, is useful and appropriate. Each governmental institution has various conflict settlement organizations, and it is necessary to operate them effectively. In order to settle financial conflicts properly, it is necessary to study law on financial consumer protection, and it is also necessary to understand practical custom and practical knowledge and to systematize them. Further, it is important to manage financial conflict-related data, to accumulate professional experiences, and to prepare a financial conflict settlement system in order to introduce financial education earlier to the whole nation.

• Journal of Power Electronics
• /
• v.18 no.3
• /
• pp.923-930
• /
• 2018

Based on the application of an integrated dynamic brake (IDB) system that uses a PWM inverter fed-AC motor drive to operate the piston, a new active zero state PWM (AZSPWM) is proposed to improve the stability and reliability of the IDB system by suppressing the conducted electro-magnetic interference (EMI) noise under a wide range of load torque. The new AZSPWM reduces common-mode voltage (CMV) by one-third when compared to that of the conventional space vector PWM (CSVPWM). Although this method slightly increases the output current ripple by reducing the CMV, like the CSVPWM, it can be used within the full range of the load torque. Further, unlike other reduced common-mode voltage (RCMV) PWMs, it does not increase the switching power loss. A theoretical analysis is presented and experiments are performed to demonstrate the effectiveness of this method.

• Journal of National Security and Military Science
• /
• s.3
• /
• pp.197-242
• /
• 2005

Active catalog is a kind of digital content that enables consumers to test the functions and features of products from their PCs as if they were using it in real life, by simulating the actions and responses of the product. This new type of interactive digital content can be used extensively to make sales personnel training manuals, sales tools, user manuals and user trouble shooting documents. With active catalogs, companies will be able to compare different designs, show actions according to different functions, and evaluate user reaction to new products without having to produce a single physical prototype or mock-up. At the same time, consumers will be able to understand and 'operate' the product and make well-informed purchase decisions. In this paper, we present a visual event-driven modeling tool, PlayMo, for creating active catalogs, analyze the advantages of using PlayMo, describe the event-driven method used by PlayMo and also introduce two enhanced characteristics of the Event Flow Chart with which the events in PlayMo are structured. Interactive digital content by using the PlayMo3D makes easy, simple and effective design for e-learning, e-catalogue, e-marketing/sales, e-prototyping, customer support, etc. Through its application-ready 3D function visualization solution, engineers and designers can rapidly turn a CAD design model into a 3D interactive virtual product, and the effective function prototyping job can be also completed within a minute.