• 한국소음진동공학회논문집
• /
• 제18권1호
• /
• pp.131-138
• /
• 2008

This paper presents real-time hybrid test method of large-scale MR damper applied to a building structure under seismic excitation. The real-time hybrid test using an actuator for the control performance evaluation of a MR damper controlling the response of earthquake-excited building structure is experimentally implemented. In the test, the building structure is used as a numerical part, on which a large-scale MR damper adopted as an experimental part was installed to reduce its response. At first, the force that is acting between a MR damper and building structure is measured from the load cell attached on the actuator system and is fed-back to the computer to control the motion of the actuator. Then, the actuator is so driven that the error between the interface displacement computed from the numerical building structure with the excitations of earthquake and the fed-back interface force and that measured from the actuator. The control efficiency of the MR damper used in this paper is experimentally confirmed by implementing this process of experiment on real-time.

• 수산해양기술연구
• /
• 제53권3호
• /
• pp.228-239
• /
• 2017

This study investigated the drag coefficient and lift coefficient of thirteen kinds of knotless nettings used for large purse seine gear. By comparing the hydrodynamic characteristics with nets of the previous study, the characteristics of this study were derived as a purse seine gear. Thirteen kinds of nettings with different length of bar (l) and diameter (d) were used in the experiment, out of which six kinds used the 30 mm in mesh size and three kinds with 40 mm. The drag coefficient ($C_d$) also increased with increasing d/l. It can be expressed as $C_d=3.71499(d/l)+0.76595$ at a current speed 0.4 m/s and $C_d=4.30324(d/l)+0.69056$ at a current speed 0.5 m/s. Compared with previous studies, drag coefficient values were similar to knotless net of similar d/l and smaller than drag coefficient of knot net. Therefore, using knotless net in a purse seine has the advantage of reducing the resistance acting on the purse seine gear.

• 한국산업정보학회논문지
• /
• 제25권2호
• /
• pp.39-47
• /
• 2020

본 논문은 추가 비용 없이 전기자동차(EV) 주행 범위를 확장하기 위해 에너지 효율적인 전기자동차 주행 프로파일을 도출하는 새로운 시스템 수준의 프레임 워크를 소개한다. 이 논문은 먼저 운전 차량에 작용하는 힘과 모터 효율을 고려한 전기차 파워 트레인 모델을 구현한 후, 경로에 의해 정의된 주행 임무에 대한 최소 에너지 주행 프로파일을 도출한다. 이를 위해서 본 프레임워크는 먼저 최적화 문제를 공식화하고, 가중치 계수를 이용한 동적 프로그래밍 알고리즘을 사용하여 에너지 소비와 운전 시간을 모두 최소화하는 주행 프로파일을 도출한다. 본 논문은 주행 시간 제약을 만족시키기 위한 다양한 가중치 계수 도출 방법을 소개한다. 시뮬레이션 결과, 제안 된 스케일링 알고리즘의 연산시간이 이진 검색 알고리즘 및 탐욕 알고리즘보다 각각 34 % 및 50 % 더 작음을 보여준다.

• 한국지반공학회논문집
• /
• 제29권12호
• /
• pp.25-34
• /
• 2013

본 논문에서는 계절적 환경변화로 인한 습윤-건조 반복과정에 노출되는 옹벽구조물의 거동에 관한 축소 모형실험 연구 내용을 다루었다. 이를 위해 먼저 습윤-건조 과정을 모사할 수 있는 모형 옹벽 실험 장치를 구축하고 강우강도 및 뒤채움흙의 종류 등을 매개변수로하여 다양한 조건에 대한 실험을 수행하였다. 그 결과 강우로 인한 습윤-건조 반복 과정은 옹벽의 변위를 증가시키고 토압을 증가시키는 등 거동 측면에서 불안정성을 야기시킬 수 있는 인자로 검토되었다. 한편, 전반적으로 첫 번째 습윤-건조 사이클에서 변위가 가장 크게 발생하고 그 이후 습윤 사이클에서의 변위 증가량은 사이클이 진행되면서 감소되는 것으로 관찰되었다. 아울러 이러한 습윤-건조 반복과정의 영향은 뒤채움흙의 종류에 따라 그 정도가 차이나는 것으로 나타났으며 세립분 함유량이 클수록 습윤-건조 반복작용의 영향이 큰 것으로 검토되었다.

• 대한금속재료학회지
• /
• 제48권7호
• /
• pp.630-638
• /
• 2010

The present investigation has been performed on the mixing behavior and microstructural development during fabrication of Fe micro-nano powder feedstock for a micro-powder injection molding process. The mixing experiment using a screw type blender system was conducted to measure the variations of torque and temperature during mixing of Fe powder-binder feedstock with progressive powder loading for various nano-powder compositions up to 25%. It was found that the torque and the temperature required in the mixing of feedstock increased proportionally with increasing cumulative powder loading. Such an increment was larger in the feedstock containing higher content of nano-powder at the same powder loading condition. However, the maximum value was obtained at the nano-powder composition of not 25% but 10%. It was owing to the 'roller bearing effect' of agglomerate type nano-powder acting as lubricant during mixing, consequently leading to the rearrangement of micro-nano powder in the feedstock. It is concluded that the improvement of packing density by rearrangement of nano-powders into interstices of micro-powders is responsible for the maximum powder loading of about 71 vol.% in the nano-powder composition of 25%.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2009년도 춘계학술대회
• /
• pp.547-550
• /
• 2009

본 논문에서는 선박용 비상 디젤 엔진 발전기 제어 및 모니터링을 위해 제안된 디지털 기반의 입/출력 인터페이스 회로를 소개한다. 선박용 비상 발전기의 동작 상태를 모니터링 하고 제어하기 위해 제어 및 감시 회로는 5개의 아날로그 입력 채널과 2개의 픽업(Pick-up) 코일 계측 회로, 브로컨 와이어(Broken Wire) 감지 기능을 가지는 10개의 디지털 입력 채널 및 7개의 릴레이 제어 신호 출력 채널이 요구된다. 본 연구에서는 아날로그 입력 단에 간단한 필터 회로와 포토커플러, 비교기 회로를 이용하여 입력신호에 대한 신호처리를 수행하였으며, 중요한 릴레이 출력 신호들은 이중으로 단속될 수 있도록 설계하여 오동작을 철저히 방지하였다. 그리고 픽업코일 신호를 디지털 처리하는 회로를 적용하여 속도 신호 입력의 정확성을 향상 시켰다.

• 대한조선학회논문집
• /
• 제54권4호
• /
• pp.335-343
• /
• 2017

The Newman-Raju formula and contour integral-based finite element analyses(FEAs) have been widely used to assess crack growth rates and residual lives at crack locations in ships or offshore structures, but the Newman-Raju formula is known to be less accurate for the complicated weld details and the conventional FEA-based contour integral approach needs concentrated efforts to construct FEA models. Recently, an extended finite element method(XFEM) has been proposed to reduce those modeling efforts with reliable accuracy. Stress intensity factors(SIFs) from the approaches such as the Newman-Raju formula, conventional FEA-based J-integral, and XFEM-based J-integral were compared for an infinitely long plate with a propagating elliptic crack. It was concluded that the XFEM approach was far reliable in terms of prediction ability of SIFs. Assuming a 25 year-aged coast guard patrol ship had the prescribed cracks at the bracket toes attached to longitudinal stiffeners in way of deck and bottom, SIFs were derived based on the three approaches. To obtain axial tension loads acting on the longitudinal stiffeners, long term hull girder bending moments were assumed to obey Weibull distribution of which two parameters were decided from a reference (DNV, 2014). For the complicated weld details, it was concluded that the XFEM approach could cost-effectively and accurately estimate the crack growth rates and residual lives of ship structures.

• 방사성폐기물학회지
• /
• 제19권2호
• /
• pp.161-176
• /
• 2021

In this study, the electrochemical behavior of Sm on the binary liquid Al-Ga cathode in the LiCl-KCl molten salt system is investigated. First, the co-reduction process of Sm(III)-Al(III), Sm(III)-Ga(III), and Sm(III)-Ga(III)-Al(III) on the W electrode (inert) were studied using cyclic voltammetry (CV), square-wave voltammetry (SWV) and open circuit potential (OCP) methods, respectively. It was identified that Sm(III) can be co-reduced with Al(III) or Ga(III) to form Al_zSm_y or Ga_xSm_y intermetallic compounds. Subsequently, the under-potential deposition of Sm(III) at the Al, Ga, and Al-Ga active cathode was performed to confirm the formation of Sm-based intermetallic compounds. The X-ray diffraction (XRD) and scanning electron microscopy-energy dispersive spectroscopy (SEM-EDS) analyses indicated that Ga₃Sm and Ga₆Sm intermetallic compounds were formed on the Mo grid electrode (inert) during the potentiostatic electrolysis in LiCl-KCl-SmCl₃-AlCl₃-GaCl₃ melt, while only Ga₆Sm intermetallic compound was generated on the Al-Ga alloy electrode during the galvanostatic electrolysis in LiCl-KCl-SmCl₃ melt. The electrolysis results revealed that the interaction between Sm and Ga was predominant in the Al-Ga alloy electrode, with Al only acting as an additive to lower the melting point.

• 한국연극학
• /
• 제52호
• /
• pp.229-270
• /
• 2014

Ostermeier's Hamlet has no particular contemporary reinterpretation. Alternately devoting to show retrospect in illusion and existence through revenging actions. However, Shakespeare's metaphorical and implicative language is dissipated and the style of the play is not an illusive space-time, but a tragic theatrical production that uses rough language to express the depth of the story. The Perfomance of Hamlet is a sensuous jumble up of a diverse range of mass media. The double roles that the actors carry out give an affect of isolation between the audience and the play itself showing both empathy and liberty. Ostermeier's Hamlet distinctively shows a post-modern performance through the prominent elements of dirt, the use of mixed genre, theatric emphasis, making an image and the fulfillment of acting. Nonetheless, Ostermeier's performance stays off the point on the breakup strategy of the post-modern drama without suspending the narrative of Shakespeare's Hamlet. Besides aiming to show a performance centered by the imagery of physical expression, his performance shows New Realism in the 1960's, showing everyday life. Ostermeier thinks, that theatre helps give contemporary people an accurate reality check in the constant unstable periods of time. Therefore, Hamlet shows post-modern physical expression and outspoken dramaturgy using the effects of mass media in New Realism without breaking up realistic narration. With being the aberration of the Castle Helsingor, the main character Hamlet, expresses lunacy and can be considered as metaphor for young adults whom are broken down and isolated from the economic system. He is a substitute for those who experience agony, anger, torment, etc. and other suppressed emotions in everyday life. With the method of direction in the portrayal of Hamlet show signs of succession in the abundant popularization of the classics by communicating with the audience by following the trend of modern mass media and audio-visual perception; emphasizing the point of the philosophical topic 'life and death,' 'life and theatre,' and 'illusion and reality.'

• 한국분무공학회지
• /
• 제23권4호
• /
• pp.192-204
• /
• 2018

In this study, a 3D CFD analysis method for the combustion process was established for a low calorific value syngas-diesel dual-fuel engine operating under very lean fuel-air mixture condition. Also, the accuracy of computational analysis was evaluated by comparing the experimental results with the computed ones. To simulate the combustion for the dual-fuel engine, a new dual-fuel chemical kinetics set was used that was constituted by merging two verified chemical kinetic sets: n-heptane (173 species) for diesel and Gri-mech 3.0 (53 species) for syngas. For dual-fuel mode operations, the early stage of combustion was dominated by the fuel burning inside or near the spray plume. After which, the flame propagated into the syngas in the piston bowl and then proceeded toward the syngas in the squish zone. With the baseline injection system and piston shape, a significant amount of unburned syngas was discharged. To solve this problem, effects of the injection parameters and piston shape on combustion characteristics were analyzed by calculation. The change in injection variables toward increasing the spray plume volume or the penetration length were effective to cause fast burning in the vicinity of TDC by widening the spatial distribution of diesel acting as a seed of auto-ignition. As a result, the unburned syngas fraction was reduced. Changing the piston shape with the shallow depth of the piston bowl and 20% squish area ratio had a significant effect on the combustion pattern and lessened the unburned syngas fraction by half.