• Archives of Pharmacal Research
• /
• 제18권4호
• /
• pp.224-230
• /
• 1995

Recently, many attempts have been made to use hydrogels of various polymers as delivery systems of various drugs and bioactive materials to prolong and control their phamacological activities. In this study, we have evaluated the physico-chemical properties of methacrylic acid-methyacrylic acid methyl ester copolymer 9Eudispert mv)m a acrylic resin hydorgel, and its application to transdermal delivery system. In the dissolution tests, the release rate of salicylic acid (SA) and sodium salicylate (SOd. SA) were faster than lidocain (LD) and lidocain-HCl(LD-HCl). As the concentration of Eudispert mv polymer increased, the extensibility of Eudispert mu hydrogel decreased, whereas the swelling ratio increased. The more NaOH and polymer concentration increased, the more osmotic pressure linearly increased. The skin permeation of Sod. SA, an acidic model drug, was remarkably enhanced by Eudispert mv hydrogel. All fatty acids, except for Sod. glycolate, dramatically increased the skin permeation flux in Eudispert mu hydrogel containing LD-Hcl, a basic model drug. Consequently, it is suggested that Eudispert mv hydrogel may be used as potential transdermal delivery vehicle.

• 청정기술
• /
• 제18권4호
• /
• pp.366-372
• /
• 2012

펜던트기가 tris(8-hydroxyquinoline) aluminum ($AlQ_3$)으로 된 아크릴 단량체(HEMA-p-$AlQ_3$) (HEMA = 2-hydroxyethyl methacrylate)를 각각 메틸메타크릴레이트(MMA), 아크릴로니트릴(AN), 순수 HEMA와 공중합하여 3가지 아크릴 공중합체[MMA-co-HEMA-p-$AlQ_3$ (공중합체 1), AN-co-HEMA-p-$AlQ_3$ (공중합체 2), HEMA-co-HEMA-p-$AlQ_3$ (공중합체 3)]를 라디칼 공중합법으로 합성하였다. 25 wt%의 HEMA-p-$AlQ_3$를 함유한 공중합체 1,2,3의 유리전이온도($T_g$)는 각각 158, 150, $126^{\circ}C$로 나타났으며, 이는 유기발광다이오드(organic light emitting diodes, OLED)로써 지녀야 하는 우수한 열 안정성을 만족하였다. 그리고 이들 공중합체는 테트라하이드로퓨린, 디메틸포름아미드, 톨루엔 및 클로로포름 등과 같은 용매에 잘 용해되었으며, 자외선-가시광선의 흡수 및 발광 거동이 순수 $AlQ_3$와 거의 동일함을 알 수 있었다. 또한 이들 공중합체를 스핀 코팅하여 녹색의 OLED 디바이스를 제조한 후 전류 밀도-전압 곡선을 비교하였다. 공중합체 3을 사용한 OLED 디바이스의 on-set 전압은 약 2 볼트로써 다른 두 공중합체 OLED 디바이스의 전압(공중합체 1: 약 3 볼트, 공중합체 2: 약 4 볼트) 보다 낮음을 알 수 있었다.

• 폴리머
• /
• 제38권4호
• /
• pp.491-495
• /
• 2014

UV조사에 의한 2-EHA(ethylhexyl acrylate)/AA(acrylic acid) 점착제를 제조하고 이때 첨가되는 광 개시제의 종류가 점차제의 접착물성에 미치는 영향을 조사하였다. Irgacure$^{(R)}$651(benzyldimethyl ketal)과 Irgacure$^{(R)}$184(1-hydroxy-cyclohexylphenyl ketone) 광 개시제를 도입한 점차제의 경우 UV램프의 방출 스펙트럼 근처에서의 높은 흡수율과 단량체 혼합물과의 상용성에 기인하여 우수한 접착물성을 나타낸 반면 Irgacure$^{(R)}$819(bisacylphosphine oxides) 광 개시제를 도입한 경우 사용된 UV램프의 방출 스펙트럼과 가장 겹치는 흡수 파장대를 가짐에도 불구하고 고농도에서 박리 시 응집파괴가 일어났으며 이것은 높은 함량에서 광 개시제 일부가 산소와 반응하고 이것이 수소 공여체 역할을 하여 추가적인 라디칼 형성을 일으키기 때문으로 생각된다.

• 한국응용과학기술학회지
• /
• 제20권3호
• /
• pp.221-229
• /
• 2003

A copolymer ${\sim}$550cps ; $M_n$, 2590${\sim}$2850 ; and conversion, 82${\sim}$89%, respectively. It was found from the plotting of $T_g$ versus viscosity and $T_g$ versus molecular weight that viscosity increased with $T_g$ while number averaged molecular weight decreased with increasing $T_g$.

• 한국염색가공학회지
• /
• 제13권6호
• /
• pp.435-440
• /
• 2001

This study investigates the rheological properties of in-situ polymerized solutions of polyacrylonitrile(PAN) and acrylonitrile(AN) -itaconic acid(IA) in dimethyl sulfoxide(DMSO) in terms of temperature, concentration, and time. The complex viscosity and storage modulus of the solutions were generally increased with elapsing time, which is ascribable to the three-dimensional pseudostructures formed by strong inter- or Intra-molecular attractions through Polar -CN and -COOH groups. The three-dimensional pseudonetworks would lead to relation of the acrylic solutions in long term. This was more noticeable at higher temperature within the temperature range examined. In the case of 20% solutions one can not observe lower Newtonian flow region in the viscosity curve. Disappearance of lower Newtonian flow region is indicative of heterogeneity of the solution system. Casson Plot of the viscosity data revealed that 20% solutions of PAN and AN-IA copolymer in DMSO clearly demonstrated positive yield stress, ascertaining formation of pseudostructures in the solution systems.

• 한국염색가공학회지
• /
• 제13권6호
• /
• pp.77-77
• /
• 2001

This study investigates the rheological properties of in-situ polymerized solutions of polyacrylonitrile(PAN) and acrylonitrile(AN)-itaconic acid(IA) in dimethyl sulfoxide(DMSO) in terms of temperature, concentration, and time. The complex viscosity and storage modulus of the solutions were generally increased with elapsing time, which is ascribable to the three-dimensional pseudostructures formed by strong inter- or intra-molecular attractions through Polar -CN and -COOH groups. The three-dimensional pseudonetworks would lead to gelation of the acrylic solutions in long term. This was more noticeable at higher temperature within the temperature range examined. In the case of 20% solutions one can not observe lower Newtonian flow region in the viscosity curve. Disappearance of lower Newtonian flow region is indicative of heterogeneity of the solution system. Casson Plot of the viscosity data revealed that 20% solutions of PAN and AN-IA copolymer in DMSO clearly demonstrated positive yield stress, ascertaining formation of pseudostructures in the solution systems.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1995년도 봄 학술발표회 논문집
• /
• pp.94-99
• /
• 1995

Naphthalene sulfonated condensatd(NSF) has been widely using for the superplasticizing of ement and concrete. But NSF has a very large mobility loss with elapsed tiom. To retain mobility of NSF during a certain time, maleic anhydride and acrylic acid copolymer(MA) was polymerized and mixed with NSF in order to perpare admixture holding mobility-retention property of cement. By applying this admixture for ement paste, we examined the fluidity and mobility retention property as a function to elapsed time and measured the compressive strength of mortar with curing time. As a result, NSF containing 20wt% of MA showed very excellent fluidity and mobility-retention property. These properties were affected by the added amount of admixture and the ratio of water to cement.

• 한국응용과학기술학회지
• /
• 제5권1호
• /
• pp.63-70
• /
• 1988

The quaternized compound of the copolymer between 2-diethylaminoethyl methacrylate and stearyl methacrylate (DSACC) was chosen as the mother resin for the water repellent of acrylics. The quaternized compound of 1-lauroyl dis (amino ethyl)-2-dodecyl imidazoline (LDDIC) was used to promote softening effect and hydrostatic pressure for the water repellent. The water repellent (EDUWC) obtained from the DSACC and LDDIC blended with waxes and emulsifiers improved the properties such as the water repellency, washable, tear strength and crease recovery when it was treated on the nylon fabrics with and without the resin. The reaction mechanism between the Nylon fiber and EDLWC was examined, and EDLWC was confirmed as the durable water repellent.

• 한국응용과학기술학회지
• /
• 제21권1호
• /
• pp.69-75
• /
• 2004

In this study, various model composite latexes were synthesized using n-butyl acrylate and methyl methacrylate as comonomers by seeded multi-staged emulsion polymerization. Monodispersed model composite latex particles with size of 190 nm and polydispersity index of 1.05, which have various morphology including random copolymer particle, soft-core/hard-shell particle, hard-core/soft shell particle, and gradient-type copolymer particle, homopolymers particles were prepared. The designed morphology of model composite particles were confirmed.

• 한국포장학회지
• /
• 제16권1호
• /
• pp.5-7
• /
• 2010

Two kinds of polymer coating (acrylic polymer and vinyl acetate ethylene copolymer) added with 5% nisin were fabricated on the paperboards and tested in their antimicrobial activity against Micrococcus flavus ATCC 10240 inoculated into water contacting the coating at $10^{\circ}C$. Vinyl acetate ethylene copolymer giving faster and higher nisin migration presented the greater reduction in the microbial count than the other coating, which endorsed that the migrated nisin is mainly responsible for the microbial inhibition or destruction. There was also a slight effect of the coating polymer itself in the microbial inhibition.