• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.55 no.4
• /
• pp.161-164
• /
• 2006

In this thesis we designed the vision system to inspect the defect of a back light unit of plat panel display device. The vision system is divided into hardware and inspection algorithm of defect. Hardware components consist of illumination part, robot-arm controller part and image-acquisition part. Illumination part is made of acrylic panel for light diffusion and five 36W FPL's(Fluorescent Parallel Lamp) and electronic ballast with low frequency harmonics. The CCD(Charge-Coupled Device) camera of image-acquisition part is able to acquire the bright image by the light coming from lamp. The image-acquisition part is composed of CCD camera and frame grabber. The robot-arm controller part has a role to let the CCD camera move to the desired position. To take inspections of surface images of a flat panel display it can be controlled and located every nook and comer. Images obtained by robot-arm and image-acquisition board are saved on the hard-disk through windows programming and are tested whether there are defects by using the image processing algorithms.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.9A
• /
• pp.678-683
• /
• 2003

The pseudo-noise (PN) code acquisition based on the sequential estimation (SE) proposed by Ward performs well only at relatively high chip signal-to-noise ratios (SNRs). In this paper, a seed accumulating sequential estimation (SASE) method and a PN code acquisition system based on it are proposed, which perform well at low chip SNR (of practical interest) also. Then, the mean acquisition time performance of the proposed system is investigated. Numerical results show that the system based on the SASE performs dramatically better than that based on the SE at low chip SNR, and the improvement becomes larger as the period of PN code increases.

• Journal of the Society of Naval Architects of Korea
• /
• v.46 no.1
• /
• pp.43-56
• /
• 2009

The Korean navy has made many efforts to apply the concepts of PLM (Product Lifecycle Management) and M&S to its naval design and production. However, most of the efforts that have being applied to some acquisition processes, focused only on the element technologies without information models and data frameworks. This study discusses an information model of naval ships for advanced naval acquisitions. We introduce a naval ship product model, and it refers to the DPD (Distributed Product Description) concept of SBA (Simulation-Based Acquisition). To realize the product model concept, we design a data architecture and develop a Product Model Management System (PMMS) based on a PDM System. It is validated through the case study of building the product model of the battle ship that the PMMS has the applicability to effectively manage the naval ship acquisition data on the basis of a 3D product model.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.5
• /
• pp.565-576
• /
• 2012

Cost estimates are necessary for government acquisition program to support decisions about funding, to develop annual budget requests and to validate resource requirements at key decision points. Many researches have been done about cost estimating technique recently. Parametric cost estimating models based on CERs(Cost Estimating Relationships) have been mainly used using regression method with historical data. However, there are many restrictions in developing Korean version CERs because the number of data points are too small. Specially, data collection and data management system are unstable in Korean defense environment, when developing CERs. In this research, we analyzed the historical data, and found some cost drivers in guided weapon system area. We developed the Acquisition Unit Cost CER using the regression to remove multicollinearity in the historical data. So we could overcome the restriction of the insufficient sample number. This research as a first attempt is meaningful in terms of obtaining our own Acquisition Unit Cost CER using historical cost and physical characteristic in Korean development environment.

• Journal of Korean Society of Water and Wastewater
• /
• v.31 no.3
• /
• pp.249-256
• /
• 2017

Recently, application areas based on M2M (Machine-to-Machine communications) and IoT (Internet of Things) technologies are expanding rapidly. Accordingly, water flow and water quality management improvements are being pursued by applying this technology to water and sewage facilities. Especially, water management will collect and store accurate data based on various ICT technologies, and then will expand its service range to remote meter-reading service using smart metering system. For this, the error in flow rate data transmitting should be minimized to obtain credibility on related additional service system such as real time water flow rate analysis and billing. In this study, we have identified the structural problems in transmitting process and protocol to minimize errors in flow rate data transmission and its handling process which is essential to water supply pipeline management. The result confirmed that data acquisition via communication system is better than via analogue current values and pulse, and for communication method case, applying the industrial standard protocol is better for minimizing errors during data acquisition versus applying user assigned method.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2012.05a
• /
• pp.416-423
• /
• 2012

Liquid acquisition device in the liquid propellant supply system is required to protect entrance of gas bubble into the propulsion system. The device exploits the capillary effect of micro-sized poles in a screen and supplies pure liquid-phase propellant to the propulsion system. The bubble point is the most important performance parameter in the design of a liquid acquisition device. In this paper, performance parameters affecting the bubble point are identified through literature survey, in order to develop the experimental setup for the bubble point measurement.

• International Journal of Advanced Culture Technology
• /
• v.7 no.3
• /
• pp.92-96
• /
• 2019

This study analyzes the problems of fire qualification information websites and job search websites due to incomplete information in the job search process and suggests an improvement plan. It has been confirmed that the main reason for the cost of job searching is incomplete information required for a job search and job search through existing analysis. As a result, it is suggested to construct a smooth information system for economic entities and to provide easy access to information by mitigating the incompleteness of information. Based on this, analysis of the problems of Korean qualifications in the firefighting realm reveals that there is a qualification holder information and a job information site, and a qualification holder management system is established but only information of either qualification acquisition information or employment information is provided. In addition, it is easy to access information through a qualification acquisition information and employment information site via the Internet, but there are inconveniences that qualification acquisition information and employment information are dualized. In order to improve this, it is necessary to build a new customized integrated qualification management system that covers existing Q-net qualification acquisition information and worknet employment information.

• Journal of the Korean Institute of Educational Facilities
• /
• v.25 no.6
• /
• pp.3-10
• /
• 2018

This study analyzes the average acquisition ratio between the 1st and 4th grade and the distribution and characteristics of the acquisition between the assessment items based on the case of Green Building Certification System(GBCS) for the educational facilities on the university campus. By evaluating the difference between the best scored grade (Green 1st Grade) and the general grade (Green 4th Grade), we classified the cases where the difference between grades with little or big difference. By doing this, we were able to analyze the trend that were difficult to distinguish between difficult to score and an easy task. G-SEED should be used not only as a formal system for certifying certification, but also to provide environmentally-friendly technology for buildings as well as meeting market needs. To do this, it is necessary to further refine the evaluation criteria. In addition, it is necessary to establish a qualitative evaluation system by providing detailed criteria for items that are not distinguishable among grades. It is expected that this study will be used to improve the detailed evaluation items by analyzing trends in the average acquisition rate presented in this study.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.10
• /
• pp.1795-1803
• /
• 2011

Advanced Metering Infrastructure (AMI) is one of the important components to form a smart-gird, which is an advanced power system by combining the power system with the communication systems. This AMI makes it possible to exchange information between operators and consumers for the efficient and reliable operation of the power system through a smart meter or a In-Home Display. However, according to the increase of the demanded information such as the power quality, the accurate load-profile, and the billing data to help customers manage their power consumption, it is necessary to gather more accurate analytical data from each house appliances and transfer it to the smart meter for synthesizing the information and controlling each loads. In this paper, the development of the wireless data acquisition device for the individual load data metering, which is connected with the smart meter for advanced functions, is proposed. AVR, a kind of microcontroller, and Bluetooth are used and integrated into the proposed the wireless data acquisition device to transmit the detailed power data (voltage and current) to the smart meter. To verify the effectiveness of the proposed system, a hardware experiment is carried out including the confirmation of the possibility for providing the more various information by applying analysis algorithms to the obtained data. Also, the application structure of the wireless data acquisition device to gather the data from the various house appliances is presented.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.11A
• /
• pp.1087-1094
• /
• 2008

In this paper, we propose the acquisition method of the Cyclic-Prefix CDMA using Good-Autocorrelation-Sequence (GAS-CP-CDMA) system. The sequences for GAS-CP-CDMA are m-sequence and constant amplitude zero autocorrelation code (CAZAC) with good autocorrelation property. The GAS-CP-CDMA system is proposed for interference cancellation in multi-user and -path environment in co-cell. However, the reliable initial acquisition in multi-path fading channel and multi-user system environment is crucial. In this paper, non-coherent power detector and threshold value are used for discriminating signal acquisition. The sequence used for computer simulation is CAZAC. The simulation results show proper threshold value depends on the number of users. Through the computer simulation, we draw setting up method of the optimum threshold value for the GAS-CP-CDMA system.