• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.345-350
• /
• 2002

In this study, researchers classifying the artificial flaws in semiconductor packages are performed by pattern recognition technology. For this purposes, image pattern recognition package including the user made software was developed and total procedure including ultrasonic image acquisition, equalization filtration, binary process, edge detection and classifier design is treated by Backpropagation Neural Network. Specially, it is compared with various weights of Backpropagation Neural Network and it is compared with threshold level of edge detection in preprocessing method fur entrance into Multi-Layer Perceptron(Backpropagation Neural network). Also, the pattern recognition techniques is applied to the classification problem of defects in semiconductor packages as normal, crack, delamination. According to this results, it is possible to acquire the recognition rate of 100% for Backpropagation Neural Network.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.17 no.1
• /
• pp.1-8
• /
• 2009

In this paper, reorientation based on angular momentum exchange is applied for a bias momentum stabilized satellite, which is equipped with a spherical fuel tank, and the effect of liquid slosh on the attitude properties such as inertia tensor and angular rate is investigated. In order to represent the slosh motion of liquid an equivalent mechanical model is adopted and full nonlinear equations of motion for three-body system are derived. Computer simulations are performed for several cases, which use the viscosity of liquid and the center location of the tank as input parameters, mainly in order to observe how the viscosity of liquid and the center location of the tank influence the spacecraft’s attitude. The investigation includes observing time-variations of the inertia tensor, especially presence of components of product of inertia during the maneuver.

• International Journal of Aeronautical and Space Sciences
• /
• v.6 no.2
• /
• pp.97-109
• /
• 2005

In this paper, the critical requirement for obstacle awareness and avoidance is assessed with the compliance of the equivalent level of safety regulation, and then the collision avoidance sensor system is presented with the key design parameters for the requirement of the smart unmanned aerial vehicle in low-altitude flight. Based on the assessment of various sensors, small-sized radar sensor is selected for the suitable candidate due to the real-time range and range-rate acquisition capability of the stationary and moving aircraft even under all-weather environments. Through the performance analysis for the system requirement, the conceptual design result of radar sensor model is proposed with the range detection probability and collision avoidance mode is established based on the time-to-collision, which is analyzed by collision scenario.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.10
• /
• pp.94-99
• /
• 2006

Ozone concentration and flow rate of discharge tube were measured using LabVIEW program in data acquisition part and it was saved. In addition, quantities of ozone generation was adjusted by the collected data, which was performed at control part. Therefore, energy efficiency was improved by suppling quantities of ozone generation according to environmental conditions.

• Journal of Biomedical Engineering Research
• /
• v.7 no.1
• /
• pp.21-34
• /
• 1986

In this paper, we described the ECG telemetry system via the Public Telephone Line. The system consist of a signal acquisition and measurement section, a signal processing section, and a signal transmission section. It used 8 bits microprocessor. The transmission section is composed of 3 ch. analog modulators and 1 ct. digital modem. Especially, using the digital modem, signal is transmitted with about 50n data reduction ratio by the TP (Turning Point) algorithm. The acoustic coupler or inductive coil for linking the public telephone line are used. The speed of the digital modem is 300 baud rate. The MCBS (Multi Channel Biotelemetry System) is tested and evaluated through the experiment.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2515-2517
• /
• 2002

The process of character recognition goes through 5 steps; image acquisition, character region extraction, preprocessing, character region segmentation, character recognition. Therefore the final recognition rate of character recognition is directly affected by the performance of each step. This paper is a leading research for object recognition using image processing algorithm which is one of the field of study in computer vision. And this paper will suggest an algorithm to extract the portion of number chain, which is part of the research embodying a system to perceive the data of manufacture and the name of the producer on the wrapping of groceries. In addition, this can extract the number chain comparatively accurate without using many complex algorithm by diving and extracting the moving number region at the same time.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.11a
• /
• pp.472-475
• /
• 2002

A Rogowski coil can measure alternating currents from a few amps to over 1 million amps in a frequency range from less than 0.1 Hz to about lMhz. A Rogowski coil provides an induced output voltage which is proportional to the rate of change of the primary current enclosed by the flexible or the rigid coil-loop. Therefore, it is necessary to integrate the output voltage in order to produce a voltage proportional to the current. Also. it can reproduce the current waveform on an oscilloscope or any type of data acquisition device. This paper describes the practical design of the combination of a Rogowski coil and an integrator which provides a versatile current measuring system to accommodate a wide range of frequencies, current levels and conductor sizes.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.13 no.10
• /
• pp.966-973
• /
• 2001

In this study, measurement and analysis of energy consumption of an office building with cleanroom and laboratory have been conducted. Data acquisition system for collecting energy consumption data of the whole building including air-conditioning equipments has been installed in a building located in Seoul. Data are collected for a period of one year in 2000 and analyzed for studying the energy consumption pattern. The percentage of electrical energy used for air-conditioning system is measured to be 46.1%. The collected data will serve as valuable information for diagnosing and improving the energy system of the building.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.255-260
• /
• 2003

The regulation for floor impact sound level is expected to be amended to 50㏈(L$\_$i, Fmax, AW/) and below in heavy-weight impact sound and 58㏈(L'$\_$n, AW/) and below in light-weight impact sound in Korea. The purpose of this paper is to analyze the influence factors of floor impact sound levels in apartments. The influence factors were air pressure of bang machine, height of microphones, data acquisition rate, etc. The air pressure range of bang machine were from 2.2 Pa to 2.6 Fa. Five microphones were installed at a height of 0.5m, 0.7m, 0.9m, 1.2m, 1.5m or 1.7m from floor level. The floor impact sound level was varied about 1-3㏈(L$\_$i, Fmax, AW/) in heavy-weight impact sound according to the influence factors.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2557-2560
• /
• 2000

The protection system of the nuclear reactor and chemical reactor are representative of PPC(Plant Protection Controller). This PPC must be designed based on reliability as well as concept of safety, which is a failed system go a way of safe. PPC is consist of part of data acquisition, calculator, communication with redundancy, and a voter is important factor of reliability. Because it is serial connected. This paper presents a Design and Analysis of a Voting Mechanism considering Safety for NMR PPC Using EPLD. In the case of digital implementation a coincidence logic(voter) of PPC, it needs CPU and memory, so increase a number of units. Therefore the failure rate and cost is increased. On the contrary when it is designed EPLD or FPGA.