• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.295-298
• /
• 2011

최근 3년간 판 구조물의 손상진단에서 시간반전램파 (Time reversal Lamb waves)의 가능성이 주목 받고 있다. 시간반전음향학(Time reversal acoustics)에 의하면 시간반전램파의 공간모임을 적절히 활용하면 판에 순간적으로 가해지거나 발생한 충격하중의 위치를 높은 공간해상도와 신호대 잡음비로 추정할 수 있다고 알려져 있다. 이 연구에서는 시간반전램파의 공간모임을 직사각형 평판에서 가상탐지자 모델을 이용하여 모사한다. 특히, 평판에서의 파 반사에 의해 발생하는 가상탐지자 효과에 의해 단일 부착형 압전소자만을 사용하더라도 시간반전 램파의 공간 모임 구현이 가능함을 보인다. 또한 제안된 방법의 결과를 유한 요소 해석결과와 비교하고 제안된 방법의 타당성을 보인다.

• The Journal of the Acoustical Society of Korea
• /
• v.1 no.1
• /
• pp.19-26
• /
• 1982

n optimization technique is adapted to determine the stage enclosure configuration preferred by performers. The merit function which quantifies the ease of ensemble among the performers is derived from a set of qualitative conditions recommended by researchers of hall acoustics. The ray path tracing technique based on the modified method of images is used to analyze acoustical characteristics at any locations of performers in stage enclosure. The gradient search technique is employed to find the geometric parameters which maximmize the merit function. As an example, optimum stage enclosure configuration of the trio chamber music is obtained using the computer program developed. The developed technique can be used in the design of concert hall stage and also in forming a special enclosure with movable reflecting surfaces.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.5
• /
• pp.1087-1095
• /
• 1990

A finite element method is used for analyzing the resonance characteristics of circular wind tunnel. Two-dimensional circular wind tunnel with one and three slots is considered. The wind tunnel resonance characteristics are affected by the number and position of the slots of the wind tunnel. The resonant frequencies for the vertical vibration mode are higher than those for the horizontal vibration mode. The resonance frequencies increase as the open area ratio increases.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.5
• /
• pp.1096-1103
• /
• 1990

A finite element method is used for analyzing the resonant characteristics of three- dimensional wind tunnel with circular cross section. The resonant frequencies of wind tunnel is nearly constant in Mach number range of 0.0-0.2. The resonant frequencies and modes of three-dimensional low speed wind tunnel have been calculated. The 20-node isoparametric element gives accurate results compared with the experimental results.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.749-754
• /
• 2003

In this paper, we introduce the measurement of the underwater noise with 32channel hydrophone array of Samsung CAvitation Tunnel (SCAT) and the detection technique of noise sources by using the beam-forming method. Measurement and way signal Processing under fluid flow are essential works for the underwater acoustics, especially for the detection of noise sources. As the acoustic impedance of the water is relatively high and the tunnel is an enclosed system, we have to consider the interaction between tunnel and water together with the reflection of noise in the beam-forming technique. Also, for a hydrophone array system that is fixed on one side of tunnel wall as done in SCAT is liable to suffer from some limitations in the detection of the noise sources with the array, we discuss these limitations particularly on the frequency range and spacing of noise sources.

• International Journal of Railway
• /
• v.4 no.1
• /
• pp.19-27
• /
• 2011

Many studies for improving the railway vehicle's performance and comfort such as speed, weight and noise are currently in progress. Improving the structural characteristics of the vehicle for greater noise insulation is considered important for reducing disturbance due to noise, but measuring transmission loss entails large costs. This study explores an alternative method for estimating and measuring the railway vehicle's transmission loss that involves on applying the numerical analysis coupled with scaled reverberation chamber measurement. The transmission loss measurement using scaled reverberation chamber was performed after the compensation value was found through 1mm thickness(1t) specimen. For numerical analysis, a commercially available acoustics solver VA ONE was used. The proposed method is found to lead to transmission loss measurement comparable to the measurements based on large-scale reverberation chamber. Thus, it can be argued that a reliable method has been developed for measuring railway vehicle's transmission loss.

• KIEAE Journal
• /
• v.9 no.6
• /
• pp.81-87
• /
• 2009

The purpose of the present study is to establish structural noise analyzing method for apartments building floor with structural-acoustic coupling analysis modeling. Noise through floor in the room is recognized as a significant problem with the consequence that noise isolation technique has been studied in the various fields of industry. From among noise factors, resonance sound is the main reason for solid noise of the floor, which is occurred by mechanical vibrations of the acoustic boundary line and the change of velocity. To analyse this phenomenon, numerical computation methods are provided in many fields, In this study, evaluation method for slab is established using finite element method, and a case study for analyzing acoustic phenomenon was suggested. The results show that numerical method, especially F.E.M, has a good approximation to predict noise at floors.

• The Journal of the Acoustical Society of Korea
• /
• v.31 no.8
• /
• pp.569-579
• /
• 2012

Typical Tonpilz type underwater acoustic transducers making use of piezoelectric ceramics detect the magnitude of an acoustic pressure, a scalar quantity, and convert this pressure into a proportional output voltage. The scalar sensor has no directional sensitivity. In this paper, we have proposed a new vector sensor based on the Tonpilz transducer structure, which is sensitive to both the magnitude and the azimuthal direction of an acoustic wave. Validity of this new design has been confirmed with analytic equations and finite element analyses.

• Proceedings of the KSME Conference
• /
• 2001.06b
• /
• pp.198-203
• /
• 2001

This paper discusses an experimental method for measuring the insertion loss (IL) performance of a double panel that are used in vehicles. Instead of two adjacent reverberation chambers which are generally used to measure the transmission loss (TL) of the large sound isolation materials, air-borne sound insulation tester was utilized to determine the IL and articulation index (AI) of standardized deadening materials. In comparison to reverberation chamber method, air-borne sound insulation tester method is more space-saving, more time-saving and more simple to the automotive acoustics. From the empirical results, it is verified that the performance of deadening materials is closely connected with thickness of panels, type of filling material that is filled into a double panel, and area ratio of double panel.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.3
• /
• pp.824-833
• /
• 1991

본 연구에서는 차체구조계의 진동모드 변수와 차실음향계의 음향모드변수들이 어떻게 관련되어 차실소음을 결정하는 가를 밝혔다. 그 결과, 수치해석 결과의 효용 성을 높이고 실내소음 평가방법을 체계화 시킬 수 있었으며, 효과적인 소음저감을 위 한 유용한 자료를 얻을 수가 있었다. 한편, 이제까지의 차실소음의 응답해석에서 가 장 큰 오차의 발생요인은 차체의 구조진동 모드데이타인데, 본 연구에서는 유한요소해 석 대신 모드시험 결과를 이용함으써, 유한요소 모델리이 어려운 경우의 소음 해석의 신뢰도를 높일수가 있었다.