• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.285-288
• /
• 1999

기타를 구성하고 있는 요소들, 즉 목, 몸체, 면 그리고 브리지 등이 서로 어떠한 음향학적 관계를 갖고 있고, 그들이 방사 특성에 구체적으로 어떻게 연관되어 있는 지를 밝혀보고자 한다. 이를 위하여는, 기타의 전체 특성 및 개별 요소의 특성을 동시에 살펴볼 수 있는 음향홀로그래피 방법이 가장 설득력이 있다. 본 연구에서는 이 홀로그래피 방법을 이용하여 다음과 같은 결과를 얻었다. 즉, 고주파 대역의 소리는 주로 판을 통해 방사가 되며 저주파 대역은 구멍과 현의 진동을 통해 주로 방사가 된다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1996.10a
• /
• pp.19-23
• /
• 1996

이 연구는 영상 홀로그래픽의 원리를 이용하여 직선배열형 음향센서 어레이를 측정대상에 직접 주사시켜 고분해능을 가지고 짧은 계측시간에 정확한 음원의 절대위치를 추저에 그 목적을 두고 있다. 시뮬레이션을 통하여 재생시 평생간섭파의 영향을 제거하기 위해 측정면의 길이와 센서간격을 나이키스트조건이 성립하는 최적조건을 찾아내었고, 실험을 통하여 실제음장에서 음원 위치 추정을 행하여 비교.검토한 결과 , 계산기상의 시뮬레이션 결과와 일치함이 확인되었다.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.4
• /
• pp.94-100
• /
• 1997

In order to investigate the radiation of sound from the King Song-Duk bell, we measured the sound pressure around the bell at every 30$^{\circ}$ using a microphone line array which was composed of 30 microphones separated by 15cm;total number of measurement point was 360. The sound field was estimated by using cylindrical acoustic holography. The spectrum of measured sound pressure demonstrates that it is almost like white noise in the very beginning, but in 10 seconds two close frequency components(64.06Hz, 64.38Hz) remain and make a famous beating. This beating sound is often believed to make unique sound of the King Song-Duk bell. The mode shapes of that frequency components are the same except that one is rotated by 45$^{\circ}$ from the other. This phenomenon occurs at the other pairs of components are the same except ones in very high frequency range where the mode shapes are rather complex.

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.3
• /
• pp.166-170
• /
• 2005

This paper describes the experimental study for the position estimation method of underwater sound source using the Nearfield Acoustic Holography. The result confirms that it can be used in the identification of underwater noise sources. The sound sources in the experimental work consists of 2 spherical projectors and the near-Held sound pressure is measured in the hologram plane. From the cross-power spectra of the measured data, the complex sound pressures on the hologram plane is derived and its spatial transformation gives sound fields in a source region. The obtained sound fields in a source region showed that the position of each sound source and their relative source strength are exactly estimated. In conclusion, this technique can be applied for estimation of each source position and its relative strength contribution for the underwater multiple sound sources.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.11a
• /
• pp.731-736
• /
• 2000

The recently developed BEM-based NAH(nearfield acoustical holography) is a useful technique for identifying the sound source of vibrating objects. The acoustic parameters of a sound source can be reconstructed by using the vibro-acoustic transfer matrix, which is determined by means of BEM, and the sound pressure measured in the nearfield. Theoretically, one can come up with a very nice reconstructed result as the field plane gets near to the source surface. However, when a microphone is placed in the very close nearfield of the source surface, the scattering, reflection, or resonance in the gap between the source and the microphone can distort the acoustic field, and therefore, the measured field pressure would differ from the actual one in the absence of the microphone. In order to analyze this problem, the interference effect of the microphone is numerically calculated by using the nonsingular BEM that yields very small error in the nearfield. From this analysis, it is found that the prediction error of the field pressure decreases firstly and then increases as the microphone approaches the vibrating surface from the farfield to the close nearfield. It is noted that the microphone should be separated from the source surface by at least a diameter of the microphone for an error ratio less than 2% in the low frequency range less than about 2.7kHz. This means that if one wants to put a microphone in the very close nearfield. a microphone with small diameter should be used.

• The Journal of the Acoustical Society of Korea
• /
• v.25 no.3
• /
• pp.121-128
• /
• 2006

Korean pyeongyeong, a set of sixteen L-shape chime stones covering one and one third octaves, is a standard instrument in the Korean traditional court music. We analyze the vibrational mode frequencies in a pyeongyeong replica which is played at the National Center for Korean Traditional Performance Arts and pyeongyeong remains which are exhibited at King Sejong Memorial Museum. The modal shapes on the Whangjong, the 1st stone and Cheonghyurjong, the 16th stone mapped by scanning accelerometer, TV holography and STAR system. The nominal frequencies in pyeongyeong replica at the National Center for Korean Traditional Performance Arts increase linearly with the thickness of the stones and the tones are tuned in line with the musical scale of Sambunsonik. The sexagenary cycles on the pyeongyeong remains at King Sejong Memorial. which show the Year of product indirectly, are different each other and the tones are not tuned in scale. The relative frequency ratios of each modes on stones differ more than just-noticeable differences from those on the pyeongyeong replica. Modal shapes are same for the two stones regardless of the thickness.

• The Journal of the Acoustical Society of Korea
• /
• v.8 no.4
• /
• pp.23-28
• /
• 1989

In this paper, the construction of ultrasonic hologram and the image reconstruction using computer have been studied, and it has been compared with optical reconstruction. The ultrasonic hologram has been constructed using c-scanning method$(128\times128 step)$and the image of the object has been reconstructed by computer using Rayleigh -Sommerfeld formula and DFT algorithm. In this experiment, the holography system has been builted with the transducer of 5MHz center frequency and 5cm focal length, and the mechanical c-scanning system. It has been shown that the reconstructed image using computer for aluminum plane with the 'S' shaped defect has been displayed image of high quality.

• The Journal of the Acoustical Society of Korea
• /
• v.14 no.5
• /
• pp.11-19
• /
• 1995

The Interaction between tire and road is responsible for the excited vibration of the tire, and It is also important for the sound radiation. In this paper. measurement of tire structural vibration noise from a chassis dynamometer using Spatial Transformation of Sound Field(STSF) technique is studied. STSF involving a scan that uses an array of transducers over a planar surface close to the source is under investigation. From cross spectra measurement during the scan, a principal component representing the sound field is extracted. Any power descriptor of the near field can then be investigated by means of near-field acoustic holography, while the distant field can be determined by application of Helmholtz integral equation. The results of the measurement were used to obtain the radiation sound pattern from the center line of the tire, and to locate the radiation sound generating regions in the vicinity of the tire.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.10a
• /
• pp.110-112
• /
• 2009

Transient acoustic pressure in the near field of an impacted plate carries information that can be utilized for recovering the impact force history. The inverse calculation approach using BEM-based NAH, which is conventionally used for time harmonic excitation, can be applied for reconstructing the transient waves using the principle of Fourier transform and spectral analysis. Then, using the recovered velocity in normal direction of the plate surface, the corresponding structural intensity can be obtained and the identification of input power can be performed. However, several manipulations should be given to overcome numerical artifacts, such as aliasing and erratic oscillation at discontinuity, and to suppress the effect of noise. Experiment using a simply supported plate is presented for demonstration purpose.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.451-462
• /
• 2003

At the paper the method of 3D holographic moving image reconstruction is discused. The main idea of this method is based on the substitution of optically created static hologram by equal diffraction array created by acoustical (AO) field which formed by bulk sound waves. Such sound field can be considered as dynamic optical hologram, which is electrically controlled. At the certain moment of time when the whole hologram already formed, the reference optical beam illuminates it, and due to acoustooptical interaction the original optical image is reconstructed. As the acoustically created dynamic optical hologram is electronically controlled, it can be used for moving 3-dimentional scene reconstruction in real time. The architecture of holographic display for moving scene reconstruction is presented at this paper. The calculated variant of such display laboratory model is. given and discussed. The mathematical simulation of step by step images recording and reconstruction is given. The pictures of calculated reconstructed images are presented. The prospects, application areas, shortcomings and main problems are discussed.