• The Journal of the Acoustical Society of Korea
• /
• v.43 no.4
• /
• pp.383-390
• /
• 2024

When measuring the radiated noise of an underwater vehicle, the range information between the vehicle and the receiver is an important factor, but since Global Positioning System (GPS) is not available in underwater, an alternative method is needed. As an alternative, the range is measured by estimating the arrival time, arrival time difference, and arrival frequency difference using a separate acoustic signal. However, errors occur due to the channel environment, and these outliers become obstacles in continuously measuring range. In this paper, we propose a method to reduce errors by curve fitting with a function in the form of a V-curve as a post-processing to remove outliers that occurred in the process of measuring range information. Simulation, lake and sea trials were conducted to verify the performance of the proposed method. In the results of the lake trial, the range estimation error was reduced by about 85 % from the Root Mean Square Error (RMSE) point of view.

• International Journal of Ocean System Engineering
• /
• v.1 no.2
• /
• pp.89-94
• /
• 2011

Underwater localization is a crucial capability for reliable operation of various types of underwater vehicles including submarines and underwater robots. However, sea water is almost impermeable to high-frequency electromagnetic waves, and thus absolute position fixes from Global Positioning System (GPS) are not available in the water. The use of acoustic telemetry systems such as Long Baseline (LBL) is a practical option for underwater localization. However, this telemetry network system needs to be pre-deployed and its availability cannot always be assumed. This study focuses on demonstrating the validity of terrain-based localization techniques in a GPS-denied underwater environment. Since terrain-based localization leads to a nonlinear estimation problem, nonlinear filtering methods are required to be employed. The extended Kalman filter (EKF) which is a widely used nonlinear filtering algorithm often shows limited performance under large initial uncertainty. The feasibility of using a particle filter is investigated, which can improve the performance and reliability of the terrain-based localization.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.05a
• /
• pp.89-93
• /
• 2003

The Korea Research Institute of Ships and Ocean Engineering (KRISO), the ocean engineering branch of KORDI, has designed and manufactured a model of an autonomous underwater vehicle (AUV) to test underwater docking. This paper introduces the AUV model, ASUM, equipped with a visual servo control system to dock into an underwater station with a camera and motion sensors. To make a visual servoing AUV, this paper implemented the visual servo control system designed with an augmented state equation, which was composed of the optical flow model of a camera and the equation of the AUV's motion. The system design and the hardware configuration of ASUM are presented in this paper. A small long baseline acoustic positioning system was developed to monitor and record the AUV's position for the experiment in the Ocean Engineering Basin of KRISO, KORDI. ASUM recognizes the target position by processing the captured image for the lights, which are installed around the end of the cone-type entrance of the duct. Unfortunately, experiments are not yet conducted when we write this article. The authors will present the results for the docking test of the AUV in near future.

• Ocean Systems Engineering
• /
• v.9 no.4
• /
• pp.391-407
• /
• 2019

Tracking the location (position) of a surface or underwater marine vehicle is important as part of guidance and navigation. While the Global Positioning System (GPS) works well in an open sea environment but its use is limited whenever testing scaled-down models of such vehicles in the laboratory environment. This paper presents the design, development and implementation of a low energy ultrasonic augmented single beacon-based localization technique suitable for such requirements. The strategy consists of applying Extended Kalman Filter (EKF) to achieve location tracking from basic dynamic distance measurements of the moving model from a fixed beacon, while on-board motion sensor measures heading angle and velocity. Iterative application of the Extended Kalman Filter yields x and y co-ordinate positions of the moving model. Tests performed on a free-running ship model in a wave basin facility of dimension 30 m by 30 m by 3 m water depth validate the proposed model. The test results show quick convergence with an error of few centimeters in the estimated position of the ship model. The proposed technique has application in the real field scenario by replacing the ultrasonic sensor with industrial grade long range acoustic modem. As compared with the existing systems such as LBL, SBL, USBL and others localization techniques, the proposed technique can save deployment cost and also cut the cost on number of acoustic modems involved.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.9
• /
• pp.723-732
• /
• 2016

This paper proposes an approach to fused navigation of an unmanned surface vehicle(USV) and to detection of the outlier or interference of global positioning system(GPS). The method fuses available sensor measurements through extended Kalman filter(EKF) to find the location and attitude of the USV. The method uses error covariance of EKF for detection of GPS outlier or interference. When outlier or interference of the GPS is detected, the method excludes GPS data from navigation process. The measurements to be fused for the navigation are GPS, acceleration, angular rate, magnetic field, linear velocity, range and bearing to acoustic beacons. The method is tested through simulated data and measurement data produced through ground navigation. The results show that the method detects GPS outlier or interference as well as the GPS recovery, which frees navigation from the problem of GPS abnormality.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.10a
• /
• pp.560-564
• /
• 1999

Burr sensing for burr size measurement and deburring process control is one of the essential elements in an automated deburring procedure. This paper presents the implementation of capacitance sensing and acoustic emission (AE) to deburring. The first application is the "on-line" measurement of burrs using a capacitance sensor. A non-contact capacitance gauging sensor is attached to an ultra precision milling machine which was used as a positioning system. The setup is used to measure burr profiles along machined workpiece edges. The proposed scheme is shown to be accurate, easy to setup, and with minor modifications, readily applicable to automatic deburring processes. As the second example, AE signals were sampled and analyzed for the sensor feedback of a precision deburring process - laser deburring -. The results, such as the sensitivity of AE signals to burr shapes and edge detection capability show a clear correlation between physical process parameters and the AE signals. A subsequent control strategy for deburring automation is also briefly discussed.

• International Journal of Ocean System Engineering
• /
• v.1 no.2
• /
• pp.60-67
• /
• 2011

This paper presents an in-situ correction method to compensate for the position error of an autonomous underwater vehicle (AUV) near the sea floor. AUVs generally have an inertial navigation system assisted with auxiliary navigational sensors. Since the inertial navigation system shows drift in position without the bottom reflection of a Doppler velocity log, external acoustic positioning systems, such as an ultra short baseline (USBL), are needed to set the position without surfacing the AUV. The main concept of the correction method is as follows: when the AUV arrives near the sea floor, the vehicle moves around horizontally in a circular mode, while the USBL transceiver installed on a surface vessel measures the AUV's position. After acquiring one data set, a least-square curve fitting method is adopted to find the center of the AUV's circular motion, which is transferred to the AUV via an acoustic telemetry modem (ATM). The proposed method is robust for the outlier of USBL, and it is independent of the time delay for the data transfer of the USBL position with the ATM. The proposed method also reduces the intrinsic position error of the USBL, and is applicable to the in-situ calibration as well as the initialization of the AUVs' position. Monte Carlo simulation was conducted to verify the effectiveness of the method.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2001.03a
• /
• pp.231-238
• /
• 2001

To investigate the underground structure of shallow water, Han-river near Yangsou-Ri, high resolution hydroacoustic measurements were carried out for the engineering design of railroad bridge. The acoustic source was a Boomer with an energy of 90 to 280J and in a frequency range up to about 16KHz. The reflected signals were received by using both traditional hydrophones(passive element) and a specially devised receiver unit(active element) mainly composed of piezofilms and preamplifier. They are connected to the "SUMMIT" data acquisition system(DMT-GeoTec company), where the sampling interval was set to 1/32㎳. The source position was continuously monitored by a precision DGPS system whose positioning accuracy was on the order of loom. For the quality control purposes, two different source-receiver geometries were taken. That is to say, the measurements were repeated along the profile everytime depending on the different source energy(175J, 280J), the receiving elements(passive, active) and two different source-receiver geometries. It was shown that the data resolution derived from a proper arrangement with the active hydrophone could be greatly enhanced and hence the corresponding profile section caused by the regular data processing system "FOCUS" accounted excellently for the underground formation below the shallow water.w the shallow water.

• Proceedings of the KAIS Fall Conference
• /
• 2009.05a
• /
• pp.240-243
• /
• 2009

본 논문에서는 수중에서 이동하는 무인잠수정 및 수중이동체의 위치를 측정하는 방법 중의 하나인 동적 단기선 방식(SBL)에 의한 무인잠수정의 위치측정에 대한 방법을 하이드로폰과 DAQ(Data Aquisition) 시스템을 이용하여 수조에서 테스트를 수행하였고, 실 해역에서의 실험을 실시하였다. 실험을 위해서 4개의 센서가 수조의 벽면에 고정이 되어 있으며, 이동체와 고정된 4개의 센서가 신호를 송수신함으로써 상호간의 위치추적이 가능하게 하는 시뮬레이션을 실시하였으며, 제안하는 SBL시스템과 장기선 방식(Long baseline)을 비교하기위한 시뮬레이션을 실시하여 두 시스템을 비교하였다. 측정된 신호는 DAQ 시스템을 이용하여 데이터를 취득하였고, Labview 프로그램을 이용하여 실시간으로 무인잠수정의 위치를 추정하였다. 위치추정에 사용된 알고리즘은 삼각측량법에 의한 방법을 사용하였으며, X, Y방향에 대해서는 비교적 오차가 적은 추정 결과를 나타내었으나 Z방향에 대하여서는 큰 오차를 보여 데이터로 사용할 수 가 없었다. 이는 수중이동체의 수심측정 센서를 이용하여 보완할 수 있을 것으로 본다. 향후 연구로는 위치추정 알고리즘을 보완하여 실제 선박 선저부에 센서가 부착되었을 경우에 대한 적용연구를 진행할 예정이며, 위치추정 알고리즘을 발전시켜 3차원에서의 정확한 위치 추적을 가능하게 할 예정이다.

• Fisheries and Aquatic Sciences
• /
• v.23 no.4
• /
• pp.14.1-14.14
• /
• 2020

We performed field measurements of the behavioral changes in cultured chub mackerel (Scomber japonicus) caused by tide-induced changes in the shapes of their small-sized tetragonal fish cages. The field measurements were conducted in two separate periods: neap tide, a period in which the shape of the fish cages was stable; and spring tide, a period in which the fish cages are significantly deformed, which was expected to have significant influences on fish behavior. In the spring tide, the cages were deformed greatly by the moving water, with different water velocities affecting the cages to different degrees; the volume loss was estimated at 4.9% and 7.3% for v = 0.114 m/s and v = 0.221 m/s, respectively. The fish exhibited significantly different behaviors between the neap tide and spring tide. During the neap tide, the fish remained in the lower part of the cage, but during the spring tide they made frequent upward and downward movements, and their horizontal distribution changed significantly due to the changes in the shape of the cage. The cage deformation during the spring tide greatly influenced the swimming behavior of fish.