• Journal of Advanced Marine Engineering and Technology
• /
• v.7 no.1
• /
• pp.23-33
• /
• 1983

경제성과 압접성능의 우수성 때문에 일반 산업기계, 방위산업기계 및 우주항공기계등의 부품생산에 응용되고 있는 마찰 용접에 있어서, 현재 주 관심사 중의 하나는 용접강도에 대한 신뢰성 높은 공정중 비파괴 검출이며 이들의 실용화를 위한 정량적 해석이다. 그러나 이러한 연구는 아직 개발 완성되지 못하고 있다. 본 연구에서는, AE법에 의한 용접강도의 공정중 비파괴적 QC시스템 개발을 최종 목적으로 한 설계자료를 얻기 위하여, 이종강의 봉과 봉, 관과 관의 마찰용접강도와 AE 총누적량에 용접조건이 미치는 영향이 실험적으로 조사되었고, 회전 속도를 매개 변수로 하여 용접강도와 AE 총누적량과의 정량관계가 수립되었다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11b
• /
• pp.1273-1279
• /
• 2001

Precise highway traffic noise simulation and reduction require the accurate data for sound power levels emitted by vehicles, varied to road surface, traffic speed, vehicle types and makers, different from countries to countries. In this study, we have elaboratively measured domestic highway traffic noise and parameters affecting noise levels at the nearside carriageway edge. From numerical simulation using the measured results for highway traffic noise, we propose not only two correction factors to enhance the accuracy of highway traffic sound power estimation using ASJ Model-1998 but also its typical power spectrum according to road surface type. The measured and predicted highway traffic noise levels using the proposed sound power shows little difference within 1 dB.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.482-485
• /
• 2004

On the basis of theoretical studies on the effect of the cylinders attached to semi-infinite screens, the tangential sound power-transport parallel to the surface of the attached cylinder is minimized by means of a secondary sound field, which is generated from a part of the attached cylinder. The numerical study shows the possibility of deflecting the incident sound by minimizing the acoustic surface impedance of the upper sections. The acoustical shadow region was more pronounced in both near- and far-field compared to the passive case with rigid surface, i.e. without active control. For a relatively wide frequency range it was possible to enhance shielding effects only with few secondary sources and error microphones. In this paper effects of some control parameters on the actively controlled sound field near the top edge of noise barriers are studied. Results of numerical study and model measurements are shown and discussed.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1994.06a
• /
• pp.830-835
• /
• 1994

In this paper, a new method of statistically evaluating an output response probability distribution of a memory type non-linear system is practically derived based on a zero-memory type non-linear equivalent system. That is, first, the objective system is approximately and functionally separated into two functional parts, i.e., a zero-memory type non-linear part and a memory type linear part according to the well-known Wiener's idea. A whole mathematical frame of the output probability distribution is evaluated in an approximate but generalized form, based on the equivalent zero-memory type non-linear part. The memory effects between the input and the output of the system are reflected in the statistical parameters and the expansion coefficients.

• Preventive Nutrition and Food Science
• /
• v.2 no.3
• /
• pp.269-279
• /
• 1997

Various nondestructive technologies for quality inspection of fruits and vegetables were reviewed through published literatures and selected agricultural databases. These technologies were grouped into nine categories, including acoustic response, dielectric response, machine vision, magnetic response, mechanical vibration response, microwave response, optical properties, and other possible sensing technologies. Their principles and characteristics were investigated and these technologies were presented with their current and potential applications. The link of appropriate nondestructive technologies with common principal quality parameters of fruits and vegetables was summarized.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.6
• /
• pp.790-798
• /
• 2018

Discrete noise signals from a small scale tactical unmanned aerial vehicle(UAV) propeller were predicted numerically using time domain approach. Two-bladed 29 inch propeller in diameter and 150 kgf in gross weight were used for main parameters of the UAV based on the actual size of the similar scale vehicle. Panel method and Farassat formula A1 were adopted for aerodynamic and aeroacoustic analysis respectively. Time domain signals of both thickness and loading noises were transformed into frequency domain to analyze the discrete noise characteristics. Directivity pattern in a plane perpendicular to the rotating disc plane and attenuation of noise intensity according to double distance were also presented.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.1
• /
• pp.41.1-41.1
• /
• 2019

We consider dynamical dark energy models based on a minimally coupled scalar field with three different potentials: the inverse power-law, SUGRA and double exponential potentials. For each model, we derived perturbation initial conditions in the early epoch and performed the Markov Chain Monte Carlo (MCMC) analysis to explore the parameter space that is favored by the current cosmological observations like Planck CMB anisotropy, type Ia supernovae, and baryon acoustic oscillation data. The analysis has been done by using the modified CAMB/COSMOMC code in which the dynamical evolution of the scalar field perturbations are fully considered. The MCMC constraints on the cosmological as well as potential parameters are derived. In the talk we will present a progress report.

• Structural Engineering and Mechanics
• /
• v.69 no.2
• /
• pp.121-129
• /
• 2019

The present study investigates the propagation of shear waves in a composite structure comprised of imperfectly bonded piezoelectric layer with a micropolar half space. Piezoelectric layer is considered to be initially stressed. Micropolar theory of elasticity has been employed which is most suitable to explain the size effects on small length scale. The general dispersion equations for the existence of waves in the coupled structure are obtained analytically in the closed form. Some particular cases have been discussed and in one particular case the dispersion relation is in well agreement to the classical-Love wave equation. The effects of various parameters viz. initial stress, interfacial imperfection and micropolarity on the phase velocity are obtained for electrically open and mechanically free system. Numerical computations are carried out and results are depicted graphically to illustrate the utility of the problem. The phase velocity of the shear waves is found to be influenced by initial stress, interface imperfection and the presence of micropolarity in the elastic half space. The theoretical results obtained are useful for the design of high performance surface acoustic devices.

• Korean Journal of Radiology
• /
• v.23 no.1
• /
• pp.13-29
• /
• 2022

Nonalcoholic fatty liver disease, characterized by excessive accumulation of fat in the liver, is the most common chronic liver disease worldwide. The current standard for the detection of hepatic steatosis is liver biopsy; however, it is limited by invasiveness and sampling errors. Accordingly, MR spectroscopy and proton density fat fraction obtained with MRI have been accepted as non-invasive modalities for quantifying hepatic steatosis. Recently, various quantitative ultrasonography techniques have been developed and validated for the quantification of hepatic steatosis. These techniques measure various acoustic parameters, including attenuation coefficient, backscatter coefficient and speckle statistics, speed of sound, and shear wave elastography metrics. In this article, we introduce several representative quantitative ultrasonography techniques and their diagnostic value for the detection of hepatic steatosis.

• Journal of Ocean Engineering and Technology
• /
• v.25 no.6
• /
• pp.91-96
• /
• 2011

In this paper, friction welded joints were constructed to investigate the mechanical properties of welded 15-mm diameter solid bars of Mg alloy (AZ31B). The main friction welding parameters were selected to endure reliable quality welds on the basis of visual examination, tensile tests, impact energy test, Vickers hardness surveys of the bonds in the area and heat affected zone (HAZ), and macrostructure investigations. The study reached the following conclusions. The tensile strength of the friction welded materials (271 MPa) was increased to about 100% of the AZ31B base metal (274 MPa) under the condition of a heating time of 1 s. The metal loss increased lineally with an increase in the heating time. The following optimal friction welding conditions were determined: rotating speed (n) = 2000 rpm, heating pressure (HP) = 35 MPa, upsetting pressure (UP) = 70 MPa, heating time (HT) = 1 s, and upsetting time (UT) = 5 s, for a metal loss (Mo) of 10.2 mm. The hardness distribution of the base metal (BM) showed HV55. All of the BM parts showed levels of hardness that were approximately similar to friction welded materials. The weld interface of the friction welded parts was strongly mixed, which showed a well-combined structure of macro-particles without particle growth or any defects. In addition, an acoustic emission (AE) technique was applied to derive the optimum condition for friction welding the Mg alloy nondestructively. The AE count and energy parameters were useful for evaluating the relationship between the tensile strength and AE parameters based on the friction welding conditions.