• Journal of Korea Multimedia Society
• /
• v.9 no.12
• /
• pp.1572-1579
• /
• 2006

An usual acoustic emission(AE) event has two widely characterized parameters in time domain, peak amplitude and event duration. But noise in AE measuring may disturb the signals with its parameters and aggrandize the signal incertitude. Experiment activity of detection of the nick inside of porcelain with AE was made and study on AE signal processing with statistic be presented in this paper in order to pick-up information expected from the signal with noise. Effort is concentrated on developing a novel arithmetic to improve extraction of the characteristic from stochastic signal and to enhance the voracity of detection. The main purpose discussed in this paper is to treat with signals on amplitudes with statistic mutuality and power density spectrum in frequency domain, and farther more to select samples for neural networks training by means of least-squares algorithm between real measuring signal and deterministic signals under laboratory condition. By seeking optimization with the algorithm, the parameters representing characteristic of the porcelain object are selected, while the stochastic interfere be weakened, then study for detection on neural networks is developed based on processing above.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.52 no.12
• /
• pp.649-654
• /
• 2003

The simplest method for measuring output currents of the three phase inverters is to measure them with three current sensors such as hall sensors. This method requires at least two current sensors, and these types of sensors are somewhat expensive. More economical method is measuring DC link current with a simple shunt resistor, then, reconstructing output current using the DC link current value and the switching status. However, in low speed region, the measurement becomes difficult and even impossible due to the requirement of minimum switching duration for A/D conversion. These problems can be overcome by limitation of switching duration. Limitation of switching, however, causes voltage and current distortion. Owing to compensation, distortion can be effectively suppressed. However these increase acoustic noise due to increment of current ripple. In this paper, a current measurement method is proposed, which can reduce minimum switching duration resulting in reduction of acoustic noise. The validity of proposed method is confirmed through experiment.

• Proceedings of the KIEE Conference
• /
• 2001.07c
• /
• pp.1646-1648
• /
• 2001

This paper described the outputs of acoustic sensors due to the vibration of particles in the mock up GIS. We used the two type of acoustic sensors which had 150kHz resonant frequency and 60kHz resonant frequency respectively. In the experiment of the mock up GIS, we paid attention to the magnitude and attenuation of sensor outputs due to particles. In this results the output of each sensor in frequency characteristic depended on the material of GIS tank and the output of sensor in magnitude characteristics depended on the size of particles and dropping height.

• Speech Sciences
• /
• v.4 no.1
• /
• pp.35-46
• /
• 1998

In this paper production and perception data were examined to discover what acoustic features are used in distinguishing wh-questions and yes/no-questions. Production data show that the two question types are distinguished by different accentual phrasing, pitch ranges in wh-phrases, and initial lenis stop voicing of the first syllable in verb phrases. Perception data by synthetic intonation show that the two question types are distinguished by the width of pitch ranges between the first and the second syllable in wh-phrases. Initial lenis stop voicing of the first syllable in verb phrases produces a strong effect on the perceptual discrimination of the two question types.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.04a
• /
• pp.111-116
• /
• 2009

As an experimental technique to analyze the far-field characteristics of underwater cylindrical array sensors, cylindrical acoustic holography is studied. Inside an laboratory water tank, far-field directivity patterns as well as near-field source images are reconstructed from the measured hologram by hydrophone array. Approximate equation for far-field directivity estimation is derived based on stationary phase method. The simulation and experiment show well usefulness of the proposed method in application of underwater array sensors.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.6
• /
• pp.19-24
• /
• 1997

The acoustic characteristics of the sound-pipe of King Song-Dok bell, which is located on the top, are investigated by experiment and simulation. The experimental results;reflection coefficient, and radiation impedance, demonstrate that the sound-pipe is capable of radiating high frequency(above 300Hz) sound; it behave as damper. It is also found that a waveguide model well presens the acoustic characteristics of the sound-pipe.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1993.12a
• /
• pp.77-84
• /
• 1993

Systems with journal bearings generally operate in large scale and under severe loading conditions such as steam generator turbines and internal combustion engines, in contrast to the machineries using rolling element bearings. Failure of the bearings in these machineries can result in the system breakdown. To avoid the time consuming repair and considerable economic loss, the detection of incipient failure in journal bearings becomes very important. In this experimental approach, acoustic emission monitoring is employed to the detection of incipient failure caused by intervention of foreign particles most probable in the journal bearing systems. It has been known that the intervention of foreign materials, insufficient lubrication and misassembly etc. are principal factors to cause bearing failure and distress. The experiment was conducted under such designed conditions as inserting alumina particles to the lubrication layer in the simulated journal bearing system. The results showed that acoustic emission could be an effective tool to detect the incipient failure in journal bearings.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1742-1744
• /
• 2002

This paper described the outputs of acoustic sensors due to the vibration of particles in the mock up GIS. We used the two type of acoustic sensors which had 150kHz resonant frequency and 60kHz resonant frequency respectively. In the experiment of the mock up GIS, we paid attention to the relationship between outputs of sensors and particles and we found that the ratios of outputs related with the lengths of particles. We developed the apparatus including the above diagnosis algorithm for GIS.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.9
• /
• pp.822-827
• /
• 2010

In this study, it is experimentally investigated how bell acoustics are influenced by the internal cavity of the bell and the gap between the bell bottom and the floor. Acoustic transmission function and natural frequency of a test bell are measured and analysed. Experimental study is conducted to evaluated how the resonance effect influences the bell sound and how the bell sound is different according to the striking condition and the measurement direction. Acoustic resonance frequency of the cavity-gap system is predicted by boundary element analysis using SYSNOIS and the validity of the predicted result is verified by experiment. The result of the study could be applied to determine the optimal gap size which makes the bell sound strong and long.

• Speech Sciences
• /
• v.13 no.4
• /
• pp.7-21
• /
• 2006

The intent of the present study is to investigate the acoustic properties of Korean /w/ in various phonological contexts, compare them with those of English /w/, and attempt to explain why English /w/'s are perceived differently by Korean speakers depending on the phonological contexts. Experiments 1 and 2 present the acoustic measure of F2 of Korean /w/ in various linguistic positions and show that unlike English /w/, Korean /w/ shows quite a strong coarticulation with the following vowel. Based on these experiments, Experiment 3 investigates why English /w/ is adapted differently into Korean. Specifically, it discusses why English /wain/ is adapted as /wain/ whereas English /twin/ is adapted into Korean as $/t^{h_i}win/$ with an extra vowel. This study argues that the different perception of English /w/ by Korean and English speakers is due to the different F2 transitional pattern of /w/ in Korean and English in various phonological contexts. It also argues that the F2 transitional pattern is an important factor in the perception of /w/.