• 한국해양공학회지
• /
• 제15권2호
• /
• pp.79-87
• /
• 2001

In this paper, not only the development of optimizing of friction welding with more reliability and more applicability but also the development of in-process real-time weld quality (such as strength and toughness) evaluation technique by acoustic emission for friction welding of the engine exhaustive valve (SUH3-SUH35 dissimilar steels of 12.3mm, 16mm, 20mm, and 24mm in diameters) were performed, comparing with the other FRW matches of materials such as SUH3 to SUH31, STS303 and SUH3 to STS304. As an important result, the techniques for dissimilar friction welding optimization of engine heat resisting steels SUH3 and SUH35 (12.3mm, 16mm, 20mm, and 24mm) and its real-time weld quality evaluation by AE was developed, considering on both diameter and carbon equivalent effects.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1991년도 추계학술대회 논문집
• /
• pp.95-100
• /
• 1991

From a manufacturing standpoint it would be desirable to monitor the degradation of drawing die, that is essential for the maintenance of quality, the evaluation of product integrity and the reducing scrap. Acoustic emission is powerful method in monitoring fine wire drawing process, especially in detecting the die fracture at early stage. Experiments at so suggested that acoustic emission signals contained valuable information regarding the stage of a drawing process such as the surface appearance of products and the condition of lubrication. Using these informations makes AE monitoring techniques a possible tool in monitoring the drawing process operation. In order to approach this, this paper discusses the nature of acoustic emission signals produced in drawing process under various conditions. Experimental results are presented which illustrate the effects of wire and die material, lubricants, and drawing speed on the generation and the mean voltage level of acoustic emission signals. The results from these tests give controlling factors of acoustic emission generation.

• KIEAE Journal
• /
• 제9권6호
• /
• pp.81-87
• /
• 2009

The purpose of the present study is to establish structural noise analyzing method for apartments building floor with structural-acoustic coupling analysis modeling. Noise through floor in the room is recognized as a significant problem with the consequence that noise isolation technique has been studied in the various fields of industry. From among noise factors, resonance sound is the main reason for solid noise of the floor, which is occurred by mechanical vibrations of the acoustic boundary line and the change of velocity. To analyse this phenomenon, numerical computation methods are provided in many fields, In this study, evaluation method for slab is established using finite element method, and a case study for analyzing acoustic phenomenon was suggested. The results show that numerical method, especially F.E.M, has a good approximation to predict noise at floors.

• 한국항공운항학회지
• /
• 제17권4호
• /
• pp.42-47
• /
• 2009

Recently, the wide range of the composite materials is used for the making airplanes, trains and automobiles body for the lightweight. Despite having complex structures, composite materials usually have well defined mechanical characteristics. However, composite materials are difficult to understand the fracture mechanism clearly by simple mechanical test. Nondestructive evaluation (NDE) combined with mechanical testing can play a more important role and especially Acoustic Emission Testing (AET) would become known to be a useful tool to assess damage and fracture behavior of composites. In this study The experiment was performed to acquire the acoustic emission signal during tensile test using unidirectional CFRP specimen and the data was analyzed the acoustic emission parameters with the waveform.

• 비파괴검사학회지
• /
• 제23권3호
• /
• pp.280-284
• /
• 2003

사용하지 않은 새 금속 압력용기에 대하여, 사용 전 음향방출시험을 수행할 때 장비점검, 탐촉자간 거리, 탐촉자 위치, 전 측정 시스템 점검, 가압방법, 잡음 제거법 및 시험 결과의 평가 등에 대한 절차를 수립하고 현장 응용시험이 수행되었다. 일반적으로 음향방출 시험은 많은 잡음을 포함하는데 시험동안 관찰결과를 기록하여 평가 시 시간 필터링함으로서 잡음을 제거할 수 있었다.

• 대한의용생체공학회:의공학회지
• /
• 제36권1호
• /
• pp.7-15
• /
• 2015

The egg white phantom is a thermal lesion visualization phantom able to illustrate a thermal lesion. It is often used to evaluate the performance of HIFU and is less expensive than the BSA phantom. This study determined the optimal phantom composition for evaluated therapeutic ultrasound machines by varying the egg white concentration in the egg white phantom and demonstrated its utility as a therapeutic ultrasound phantom. The egg white phantom at varying egg white concentrations (10-40% in 10% intervals) was fabricated, and its thermal properties and acoustic properties were assessed. In addition, the size and shape of the formed lesion were compared between the egg white phantom and bovine liver tissue according to the electrical power. The results showed that 30% egg white phantom was optimal for the performance evaluation due to its thermal and acoustic properties. The generated thermal lesions formed sequentially as a cigar, ellipse, tadpole, and cone shapes according to the electrical power; a similar tendency was observed in the liver tissue. Hence, we conclude that the egg white phantom will prove useful in quantitatively evaluating the thermal effects of therapeutic ultrasound.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 추계학술발표대회 논문집
• /
• pp.116-120
• /
• 2001

Fiber fracture is one of the dominant failure phenomena to determine total mechanical properties in composites. Fiber fracture locations were measured by optical microscopic method and acoustic emission (AE) as functions of matrix toughness and surface treatment by the electrodeposition (ED), and then two methods were compared. Two AE sensors were attached on the epoxy specimen and fiber fracture signals were detected with elapsed time. The interfacial shear stress (IFSS) was measured using tensile fragmentation test and AE system. In ED-treated case, the number of the fiber fracture measured by an optical method and AE was more than that of the untreated case. The signal number measured by AE were rather smaller than the number of fragments measured by optical method, since some fiber fracture signals were lost while AE detection. However, one-to-one correspondence between the x-position location by AE and real break positions by optical method was generally established well. The fiber break source location using AE can be a valuable method to measure IFSS for semi- or nontransparent matrix composites nondestructively (NDT).

• 한국공작기계학회논문집
• /
• 제14권3호
• /
• pp.96-102
• /
• 2005

Acoustic Emission(AE) technique has been applied to not only material characterization evaluation but also on-line monitoring of the structural integrity. The AE source location technique is very important to identify the source, such as crack, leak detection. Since the AE waveforms obtained from sensors are very difficult to distinguish the defect signals, therefore, it is necessary to consider the signal analysis of the transient wave-form. In this study, we have divided the region of interest into a set finite elements, and calculated the arrival time differences between sensors by using the velocities at every degree from 0 to 90. A new technique for the source location of acoustic emission in fiberboard plates has been studied by introducing Wavelet Transform(WT) do-noising technique. WT is a powerful tool for processing transient signals with temporally varying spectra. If the WT de-noising was employed, we could successfully filter out the errors of source location in fiberboard plates by arrival time difference method. The accuracy of source location appeared to be significantly improved.

• 한국항공우주학회지
• /
• 제33권12호
• /
• pp.39-47
• /
• 2005

본 연구에서는 고속 충격환경을 경험하는 플라스틱 구조 소재에 대한 인장속도별 물성 평가 시험 및 구조건전성 평가에 음향방출 기법을 적용하였다. 인장속도별 물성 평가시험을 통하여 플라스틱 소재 구조물의 건전성 평가에 유용한 음향방출 신호 특성 인자들을 획득하였다. 인장속도에 따른 인장강도는 저속 인장속도 구간에서는 속도가 증가함에 따라 강도가 증가하는 특성을 보여주었으나 일정 속도 영역 이상의 고속 인장시험에서는 인장속도 증가와 무관하게 일정한 강도 값을 나타내었다. 정적 압축 구조시험에서는 음향방출 기법을 적용함으로써 플라스틱 쉘 구조물의 균열발생 시점 및 위치 등을 정확히 평가할 수 있었다.

• 말소리와 음성과학
• /
• 제6권3호
• /
• pp.73-77
• /
• 2014

The purpose of this study is to investigate the differences of the speech rate according to the area in the perceptual and acoustic analysis. This study examines regional variation in overall speech rate and articulation rate across speaking situations (picture description, free conversation and story retelling) with 14 normal adult (7 in Gyeongnam and 7 in Honam area). The result of an experimental investigation shows that the perceptual speech rate differs significantly between two regional varieties of Koreans with a picture description examined here. A group of Honam speakers spoke significantly faster than a group of Gyeongnam speakers. However, the result of the acoustic analysis shows that the speech rate of the two groups did not differ. And there were significant regional differences in the overall speech rate and articulation rate on the other two speaking situation, free conversation and story retelling. It suggest that we have to study perceptual evaluation with regard to the free conversation and story retelling in future research, and based on the results of this study, a variety of researches on the speech rate will be needed on the various conditions, including various area and SLPs who have wider background and experiences. It is necessary for SLPs to train and experience more to assess patients properly and reliably.