• Title/Summary/Keyword: Acoustic evaluation

검색결과 770건 처리시간 0.023초

자동차 부품용 강재(SM40C)의 마찰용접 최적화와 AE에 의한 실시간 품질평가에 관한 연구 (A Study on Optimization of Friction Welding of Automobile Component Materials(SM40C) and Its Real Time Quality Evaluation by AE)

  • 오세규;박종배;공유식
    • 한국해양공학회지
    • /
    • 제13권1호통권31호
    • /
    • pp.88-93
    • /
    • 1999
  • This paper presents the experimental examinations and statistical quantitative analysis of the correlation between the cumulative counts of acoustic emission(AE) during plastic deformation periods of the welding and the tensile strength and other properties of the bar-to-bar welded joints of O.D. 16mm shaft(SM40C) as well as the various welding variables. And this is a new approach which attempts finally to develop real-time quality monitoring system for friction welding. The results lead to a practical possibility of real-time quality control more than 100% joint efficiency showing good weld with no micro structural defects.

  • PDF

급성 COVID-19 감염의 음성 변화 추적 관찰 1예 (A Follow-Up Case of Voice Changes in Acute COVID-19 Infection)

  • 이승진
    • 대한후두음성언어의학회지
    • /
    • 제33권3호
    • /
    • pp.183-187
    • /
    • 2022
  • Dysphonia is well known as one of the otolaryngological symptoms of coronavirus disease 2019 (COVID-19) infection. The vocal changes of the COVID-19 condition have been reported in terms of parameters of multi-dimensional voice assessment, including acoustic analysis, auditory-perceptual evaluation, and psychometric assessment. However, there has not been a daily followup study in patients with acute COVID-19 infection. In this study, a 41-year-old male performed daily voice recordings of vowel phonation and passage-reading tasks during the self-quarantine period of one week. Compared to the normal voice status of the prepandemic period, voice abnormalities peaked on day two after the diagnosis of COVID-19 infection and recovered after one week.

초음파 현미경을 이용한 나노 박막의 접합 강도 평가 (Evaluation of Adhesive Strength for Nano-Structured Thin Film by Scanning Acoustic Microscope)

  • 박태성;곽동열;박익근
    • 비파괴검사학회지
    • /
    • 제32권4호
    • /
    • pp.393-400
    • /
    • 2012
  • 최근 나노 박막은 MEMS/NEMS, 광학 코팅, 반도체 산업 등 다양한 분야에서 사용이 되고 있다. 박막은 마모, 침식, 부식, 고온 산화를 방지하기 위한 목적으로 사용될 뿐 아니라 특성화된 자기, 유전적 특성을 만들기 위한 목적으로 사용된다. 많은 연구자들이 이러한 박막 구조의 특성(밀도, 입자 크기, 탄성 특성, 필름/기지 계면의 특성)을 평가하기 위하여 많은 연구를 진행하고 있다. 이들 중에 박막과 기지 사이의 접합 특성을 평가하는 것이 많은 연구자들의 주 관심사가 되어 왔다. 본 연구에서는 나노 박막의 접합 특성을 평가하기 위하여 각기 다른 접합 특성을 가지는 폴리머 박막 시험편을 제작하였다. 제작된 시험편의 접합 특성을 측정하기 위하여 초음파현미경의 V(z) 곡선법을 이용하여 표면파의 속도를 측정하였다. 또한 계면을 포함하는 시험편의 표면을 전파하는 표면파의 속도와 접합력의 상관관계를 확인하기 위해 나노 스크래치 시험을 적용하였다. 그 결과 초음파현미경을 이용하여 측정된 표면파의 속도와 나노스크래치 시험을 이용한 임계하중이 일치하는 경향성을 나타내었다. 결론적으로 초음파현미경의 V(z) 곡선법은 나노 스케일 박막 계면에서의 접합 상태를 평가할 수 있는 기법으로 그 가능성을 나타내었다.

표면파의 음향비선형 특성을 이용한 표면 피로열화 평가 (Evaluation of Surface Fatigue Degradation Using Acoustic Nonlinearity of Surface Wave)

  • 이재익;이태훈;장경영
    • 비파괴검사학회지
    • /
    • 제29권5호
    • /
    • pp.415-420
    • /
    • 2009
  • 이 논문은 표면파의 비선형특성을 이용하여 재료 표면의 열화손상을 평가한 사례 연구의 결과를 보고한다. 이 연구에서는 3점 굽힘 피로시험에 의해 표면에 피로열화를 가한 알루미늄 T6 시편을 대상으로 표면파의 음향 비선형 파라미터를 측정하기 위한 실험장치를 구성하였으며, 피로시험 전후에서 측정된 비선형파라미터의 크기를 비교하였다. 특히 3점 굽힘 피로시험에 의한 표면피로손상은 시편의 중앙부 표면에 집중 될 것이 예상되므로 이 주변에서의 비선형 파라미터의 변화를 세밀히 관찰하였다. 실험결과 피로손상이 거의 없는 시편의 가장자리에서는 비선형 파라미터가 피로시험 전후에서 큰 변화가 없었지만, 표면 피로열화가 집중된 중앙부에서는 뚜렷하게 증가하는 것으로 나타났다.

예인 음탐기 콘솔의 냉각 배출 홴 소음 저감을 위한 소음기 개발 (Development of the Silencer for Reducing Noise from the Exhaust Cooling Fan of the TASS Console)

  • 한형석;박미유;조흥기;김중길;임동빈;손윤준
    • 한국소음진동공학회논문집
    • /
    • 제20권12호
    • /
    • pp.1139-1146
    • /
    • 2010
  • The indoor noise of the naval vessel is very important related to the optimum environmental conditions for crews as well as the ability of fighting power of antisubmarine. Especially, sonar equipment room is one of the rooms where require to be silent because the informations of the underwater noise are collected and analyzed in there. In this paper, the sound reduction of the TASS console, one of the main noise sources in a sonar equipment room for a typical naval vessel, is described. The noise source of this TASS console is the flowing noise of cooling fan. In order to reduce this kind of noise, the plenum chamber and acoustic elbow were developed. Related to the development of the plenum chamber, the area of the air-outlet and sound absorption of the inner lining were investigated experimentally with the evaluation system of the sound insertion loss. Acoustic elbow was also manufactured and evaluated with the evaluation system of the sound insertion loss. Finally, in order to evaluated the ability of noise reduction of the plenum chamber and acoustic elbow, the indoor noise of the sonar equipment was measured when they were appled to TASS console.

음성장애에 대한 음향학적 중등도 지표 (The Acoustic Severity Index in the Pathologic Voice)

  • 홍기환;김현기;양윤수
    • 음성과학
    • /
    • 제10권4호
    • /
    • pp.201-219
    • /
    • 2003
  • Background: The perceptual assessment is generally performed by the voice specialist. The objective evaluation is performed in a voice laboratory. Research in voice laboratories has generated a variety of different objective tests and parameters. The perceptual evaluation is one of the most controversial topics in voice research. Review of literature reveals a wide variety of rating scales and reliability data fluctuating from study to study. Unfortunately, there is no widely accepted valid method for classifying voice disorders and assessing outcome after voice treatment. Objectives: The goals of this research were to identify important objective acoustic parameters of vocal quality, and to establish an objective and quantitative correlate of the perceived vocal quality. Materials and Methods : We evaluated the voice analyzed data from 122 dysphonic patients and 20 normal volunteers. A computerized speech lab. 4300B(CSL) was used to carry out the analysis of each voice sample. Results: Three dysphonia severity indices(DSI) were created using discriminant analysis. DSI is based on the weighted combination of the following selected set of acoustic parameters: absolute jitter(Jita in us), smoothed pitch period perturbation (sPPQ in %), amplitude perturbation quotient(APQ in %), soft phonation index(SPI), average fundamental frequency(Fo in Hz), lowest fundamental frequency(Flo in Hz), and smoothed amplitude perturbation quotient(sAPQ in %). The DSI, being the discriminating rule calculated by the logistic regression, consists of three equation based on statistically significant acoustic parameters. Three DSI were created to reflects best the degree of hoarseness as expressed by G from the GRBAS scale. The more positive this DSI is for a patient, the worse the vocal quality. The more it is negative, the better it is. The effect of sex is included implicitly in the DSI-1 and DSI-2, so that a separate DSI-1 and DSI-2 for males and females need not be used. The DSI is objective because no perceptual input is required for its calculation. Conculsion : This research demonstrates that the voice function values calculated from three different multivariate objective dysphonia severity indices are significantly associated with subjective voice assessments. These multivariate objective dysphonia severity indices may be appropriate for use in clinical trials and outcomes research on treatment effectiveness for voice disorders.

  • PDF