• 한국음향학회지
• /
• 제20권1호
• /
• pp.68-76
• /
• 2001

유한요소법을 이용하여 압전 수중음향센서의 모델링 및 음향특성을 해석하였다. 압전 수중음향센서의 해석에서 기본적인 압전-탄성 구조물과 유체-구조물의 연성해석을 위한 유한요소 정식화를 하였으며 무한영역의 음향유체를 처리하기 위하여 IWEE (Infinite Wave Envelop Element)를 도입하였다. Tonpilz형 수중음향센서를 수중 산란체로 볼 경우 입사파가 산란체의 표면을 가진할 때 산란체로부터 발생되는 산란파는 IWEE로 인하여 무한 유체영역에서의 산란파의 감소특성을 갖게 되어 무한영역을 유한영역으로 나눈 인위적인 경계에서 반사가 일어나지 않게 되므로 산란파의 음압을 정확히 구할 수 있었다. 또한, 이러한 산란해석을 바탕으로 입사파에 대한 음향센서 내부의 전기적 응답특성인 RVS (Receiving Voltage Signal)를 구하였다. 이러한 일련의 연구 과정들은 소나 시스템을 정확히 해석하고 음향특성을 예측하는데 큰 도움이 될 것이다.

• 융합신호처리학회논문지
• /
• 제14권1호
• /
• pp.1-5
• /
• 2013

The two major problems related to the blood flow in replaced prosthetic heart valve are thrombus formation and hemolysis. Reliability of prosthetic valve is very important because its failure means the death of patient. There are many factors affecting the valvular failures and their representatives are mechanical failure and thrombosis, so early noninvasive detection is essentially required. The purpose of this study is to detect the various thromboses formation by using acoustic signal acquisition and its spectral analysis on the frequency domain. We made the thrombosis models using Polydimethylsiloxane (PDMS) and they are thrombosis model on the disc, around the sewing ring and fibrous tissue growth across the orifice of valve. Using microphone and amplifier, we measured the acoustic signal from the prosthetic valve, which is attached to the pulsatile mock circulation system. A/D converter sampled the acoustic signal and the spectral analysis is the main algorithm for obtaining spectrum. Then the spectrum of normal and 5 different kinds of abnormal valve were obtained. Each spectrum waveform shows a primary and secondary peak. The secondary peak changes according to the thrombus model. To quantitatively distinguish the frequency peak of the normal valve from that of the thrombosed valves, analysis using a neural network was employed. Acoustic measurement has been used as a noninvasive diagnostic tool and is thought to be a good method for detecting possible mechanical failure or thrombus.

• The Journal of the Acoustical Society of Korea
• /
• 제21권1E호
• /
• pp.18-24
• /
• 2002

This paper discusses the development of an acoustic vector channel simulator for the performance analysis of an acoustic digital communication system. The channel simulator consists of transmission module, acoustic channel model, receiver, beamformer, and adaptive equalizer. The source signal (QPSK) is generated by the specified parameters. The transmitted signal generates multipath signals which have a different delay, amplitude and doppler frequency. The paper presents in details the approach to the performance analysis of an acoustic digital communication system according to the antenna structure and the various baseband signal processing techniques.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2003년도 학술대회지
• /
• pp.384-387
• /
• 2003

The object of the present work is the analysis of head/disk interaction during start/stop and constant speed operation using acoustic emission (AE). The frequency spectrum analysis is performed using the AE signal obtained during the head/disk interaction. The FFT (Fast Fourier Transform) analysis of the AE signals is used to understand the interaction between the AE signal and the state of contact.

• 대한조선학회논문집
• /
• 제55권5호
• /
• pp.394-400
• /
• 2018

Various numerical methods have been adopted for indoor noise assessments of ship plant. Acoustical radiosity method is one of the high frequency approaches for acoustic field analysis, which assumes diffuse reflections by boundaries so that it could be efficiently applied to the acoustically diffused indoor space noise analysis. In this study, an acoustic field analysis program has been developed based on radiosity method, which could apply for acoustically large enclosures such as ship's indoor space. For this purpose, the procedure of the acoustical radiosity method has been summarized and implemented to an acoustic field analysis program using MATLAB. Numerical example for a rectangular indoor space has investigated validity of the implemented program. Steady state sound pressure levels calculated for a continuous acoustic source signal have shown good agreement with those by other solutions such as an analytic solution and a ray tracing method. Instantaneous sound pressure levels calculated for an impulsive acoustic signal have provided the clues of direct/reflected acoustic field and reverberation time.

• 한국정보통신학회논문지
• /
• 제4권4호
• /
• pp.861-868
• /
• 2000

본 논문에서는 수중에서 초음파를 이용한 디지털 통신 시스템의 성능평가를 위한 수중 초음파 벡터 채널 시뮬레이터를 설계하였다. 채널 시뮬레이터는 송신단, 수중 채널 모델, 수신단, 빔형성기, 적응등화기로 구성되어 있다. 사용자가 원하는 매개변수를 입력하면 이에 따른 QPSK 신호가 발생되어 전송되며, 전송된 신호는 수중 초음파 전달 채널에서 입력된 채널 매개변수에 따라 시간지연, 진폭 및 도플러 주파수가 서로 다른 다중경로 신호가 생성되고, 생성된 다중경로 신호는 수중 잡음과 더해져서 수신기에 수신되도록 하였다. 또한 수신단에서는 안테나 배열과 안테나 소자의 위치에 따라 각 안테나 소자에 위상이 서로 다른 신호가 수신되도록 하였으며, 이 신호를 이용하여 여러 가지 배열 안테나의 구조, 배열 안테나 시스템용 알고리즘 및 적응 등화기 알고리즘에 따른 시스템의 성능을 비교 분석할 수 있도록 설계하였다.

• 한국전기전자재료학회논문지
• /
• 제20권10호
• /
• pp.907-911
• /
• 2007

This paper dealt with the frequency spectrum analysis of acoustic signal produced by partial discharge (PD) in insulation oil and the positioning of PD occurrence to apply in diagnosis of oil insulated transformers. Three types of electrode system ; the needle-plane, the plane-plane, and the wire-wire structure were assembled to simulate partial discharges in oil insulated transformers. A low-noise amplifier and a decoupling circuit were designed to detect acoustic signal with high sensitivity The frequency spectrum of the acoustic signal were 50 kHz ${\sim}$ 260 kHz in the needle-plane, 50 kHz ${\sim}$ 250 kHz in the plane-plane, and 45 kHz${\sim}$195 kHz in the wire-wire electrode system. Their peak frequencies were 145 kHz, 130 kHz and 114 kHz, respectively The position of PD occurrence was calculated by the time difference of arrival (TOA) using three acoustic emission (AE) sensors, and we could find the position within the error of 1 % in the experimental apparatus.

• 동력기계공학회지
• /
• 제11권1호
• /
• pp.45-50
• /
• 2007

Acoustic emission technology is applied to diagnosis the internal leak and operating conditions of the major valves at nuclear power plants. The purpose of this study is to verify availability of the acoustic emission as in-situ diagnosis method. In this study, acoustic emission tests are performed when the pressurized high temperature steam flowed through gate valve(1st stage reheater valve) and glove valve(main steam dump valve) on the normal size of 4 and 8". The valve internal leak diagnosis system for practical field was designed. The acoustic emission method was applied to the valves at the site, and the background noise was measured for the abnormal plant condition. To improve the reliability, a judgment of leak on the system was used various factors which are AE parameters, trend analysis, signal level analysis and RMS(root mean square) analysis of acoustic signal emitted from the valve operating condition internal leak.

• 융합신호처리학회논문지
• /
• 제10권4호
• /
• pp.220-224
• /
• 2009

본 연구에서는 유체역학 분야의 Yabe 박사 팀에 의해 제안된 CIP법을 이용한 3차원 시간영역 음장해석법의 정밀도에 대해서 자세한 검토를 하였다. 즉, 3차원 CIP 음장해석의 위상오차의 특성과 전파방향에 따른 오차를 명확히 하고, 본 수치 해석법의 유효성을 나타내었다. 다차원 CIP법으로는 M형, C형, A형이 있지만, 본 논문에서는 M형 CIP법을 이용한 음장해석의 정밀도에 대해 검토하였다. 또, 종래의 수치해석법으로 staggered-grid 모델을 이용한 FDTD법에 따른 계산결과와의 비교 검토를 하였다. 본 논문의 검토에 의해 같은 이산화조건에서는 CIP법이 FDTD법보다 해석법이 가진 분산성이 적고, CIP법으로 계산된 음압 파형이 FDTD법으로 계산된 음압 파형보다 변형이 적은 것을 알 수 있었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 추계학술대회논문집
• /
• pp.43-48
• /
• 2008

Gear system has been widely used in industrial applications and unexpected failures of gears are not only extremely damaging but also lead to economic losses. So, early detection of fault is important for diagnosis machine condition. And acoustic emission is an efficient non destructive testing technique for the diagnosis of machine health and is useful technique for early detection of fault because it can find low-amplitude and high-frequency signal on account of high sensibility. Therefore, in this paper, the AE signal was measured and preprocessed using envelop analysis for gearbox with misalignment between pinion and gear. And then the vibration characteristic of gear misalignment was analyzed.