• Journal of the Korean Ceramic Society
• /
• v.43 no.1 s.284
• /
• pp.42-47
• /
• 2006

In this paper, we prepared high-quality ZnO thin films for application of FBAR (Film Bulk Acoustic Resonator) by using pulse DC magnetron sputtering. To prevent the formation of low dielectric layers between metal and piezoelectric layer, Ru film of 30 nm thickness was used as a buffer layer. In addition we investigated the influence of annealing condition with various temperatures. As the annealing temperature increased, the crystalline orientation with the preference of (002) c-axis and resistance properties improved. The single resonator which was fabricated at $500^{\circ}C$ exhibited the resonance frequency and the return loss 0.99 GHz and 15 dB, respectively. This work demonstrates potential feasibility for the use of thin film Ru buffer layers and the optimization of annealing condition.

• Speech Sciences
• /
• v.15 no.3
• /
• pp.145-156
• /
• 2008

The goal of this study was to investigate acoustic and physiologic characteristics of two phonation types of 'Khoomei' which is a traditional singing style of people who live around the Altai mountains or Mongolia region. It can be produced two pitches simultaneously - high melody pitch can be perceived along with a low drone pitch. Sygyt and kargyraa styles are the most popular and identifiable styles and they can be recognized as the different sounds depending on the method of voice production. Two trained Mongolians participated and have used at least 5 - 6 years. The characteristics of this voice production were measured by using flexible fiberscope, Stroboscopy, Lx Speech studio, Spead, and Doctor Speech. In Sygyt style, very high vocal fold closure (71.50%) with both true and false vocal folds contact and strong breathing support was observed. They also showed that tongue height and harmonics were increased (around 10dB) with resonance cavity movement. In contrast, it was found that Kargyraa sound had very low pitch with relaxed stomach, less laryngeal tension and lower vocal fold contact (69.50%) than hard Sygyt style sound without raising the tongue during phonation. 'Khoomei' phonation can be made by strong contact of both true and false vocal folds and by increasing the harmonics as well.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.9
• /
• pp.845-852
• /
• 2012

Recently, wireless power transfer technology is ready to be commercialized in consumer electronics. It draws attention from not only experts but also public because of its convenience and huge market. However, previous technologies such as magnetic resonance and induction coupling have limited applications because of its short transfer distance compared to device size and magnetic intensity limitation on the safety of body exposure. As an alternative, ultrasonic wireless power transfer technology is proposed. The ultrasonic wireless power transfer system is composed of transmitter which converts electrical energy to ultrasonic energy and receiver which converts the ultrasonic energy to the electrical energy again. This paper is focused on the development of high energy conversion efficiency of ultrasonic transmitter. Optimal transfer frequency is calculated based on the acoustic radiation and damping effect. The transmitter is designed through numerical analysis, and is manufactured to match the optimal transfer frequency with the size of 100 mm diameter, 12.2 mm thickness plate. The energy conversion efficiency of about 13.6 % at 2 m distance is obtained, experimentally. This result is quite high considered with the device size and the power transfering distance.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.13 no.2
• /
• pp.124-131
• /
• 2002

Speech characteristics of patients with cleft palates are resonance disorders, articulatory disorders and voice disorders. The purpose of this study is to find the acoustic, physiological and articulatory characteristics of cleft palate speakers. Thirteen control groups and 3 cleft palate patients participated in this experiment. Test words were composed of simple vowels and consonants imbedded in low vowel /a/, /p 'ap'i/ and /sasi/ according to the evaluation experiments. CSL, Video fluoroscopy, Fiberscope and Nasometer were used to analyze VOT, vowel formants, profiles of articulator, VP port images and nasalance. The results are as follows : (1) The nasalance of cleft palate patients in the high vowel /i/, stop sounds and fricative sounds were 60%, 34.8% and 44.1%, respectively. These values were higher than those of the control group. (2) Posterior articulatory movements /k'a/ in patients with cleft palates showed backward movement in comparison with the control group on Video Fluoroscopic images and palatograms. These results suggested that patients with cleft palate have the compensatory oral sounds to close the VP port. (3) The VOT in patients with cleft palates was longer than that of the control group.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.218-223
• /
• 1999

A piezoelectric flextentional deep-water sonar transducer has been simulated using a coupled FE-BEM. The dynamics of the sonar transducer is modelled in three dimensions and is analyzed with extern리 electrical excitation conditions as well as external acoustic pressure loading conditions. Different results are available such as steady-state frequency response for RX and TX, displacement modes, directivity patterns, back-scattering patterns, resonant frequencies, bandwidths, quality factors, transmitting voltage (TV) responses, input receiving sensitivity (RS) responses. White the present barrel-stave typed sonar transducer of the piezoelectric material is being simulated, the external surface of the transducer is modified in order to allow the same water pressure to be applied to the inner and the outer surfaces of the transducer. With this modification for deep-water application, the resonance frequency of the modified flextentional sonar transducer becomes much lower than that of the unmodified flextentional sonar transducer. The results of the present sonar transducer modelling are also compared with those of a commercial package such as ATILA.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.2
• /
• pp.153-159
• /
• 2010

This work focuses on finding a method to reduce the noise of a hermetic reciprocating compressor during start-up using an acoustical analysis. The noise of compressor during start-up, which is a higher level than that of a normal operating condition, has transient and non-stationary characteristics. The acoustical analysis of compressor cavity is performed to find an effective method to reduce the noise level. In the acoustical analysis, the shape variations of frequency response function in the neighborhood of resonances are tested for three parameters: the height of remained oil, the suction position of refrigerant and the position of driving part. As a conclusion of this result, to reduce the emission noise of compressor during start-up, the height of remained oil should be kept at 16 mm, the refrigerant should be sucked at the cross point of nodal lines of X and Y directional cavity modes, and the driving part should be positioned in the center of cavity.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.04a
• /
• pp.771-776
• /
• 2012

Recently, wireless power transfer technology is ready to be commercialized in consumer electronics. It draws attention of not only experts but also public because of its convenience and huge market. However, previous technologies such as magnetic resonance and induction coupling have limited applications because of its short transfer distance compared to device size and magnetic intensity limitation for the safety of body exposure. As an alternative, ultrasonic wireless power transfer technology is proposed. The ultrasonic wireless power transfer system is composed of transmitter which converts electrical energy to ultrasonic energy and receiver which converts the ultrasonic energy to the electrical energy again. This paper is focused on the development of high energy conversion efficiency of ultrasonic transmitter. Optimal transfer frequency is calculated based on the acoustic radiation and damping effect. The transmitter is designed through numerical analysis, and is manufactured to match the optimal transfer frequency with the size of 100mm diameter, 12.2 mm thickness plate. The energy conversion efficiency of about 13.6% at 2m distance is obtained, experimentally. This result is quite high considered with the device size and the power transfer distance.

• Phonetics and Speech Sciences
• /
• v.8 no.3
• /
• pp.111-116
• /
• 2016

The Nasometer is most commonly used to assess the presence and degree of resonance problems in clinical settings and it provides nasalance scores to identify the acoustic correlates of nasality. Nasalance scores are influenced by factors related to speakers and speech stimuli. This study aims to examine the effect of vowel context and length of stimuli and age on nasalance scores. The participants were 20 adults and 45 children ranging in age from 3 to 5 years. The stimuli consisted of 12 sentences containing no nasal consonants. The stimuli in the three vowel contexts (low, high, and mixed) consisted of 4, 8, 16, and 31-syllable long sentences. Speakers were asked to repeat each stimulus after examiner. The results indicated significant effects of vowel contexts and stimulus length on nasalance scores. The nasalance scores for the high vowel contexts were significantly higher than those for the mixed and low vowel contexts. The nasalance scores for the mixed vowel contexts were significantly higher than those for the low vowel contexts. Speakers had higher nasalance scores for 4-syllable long sentences and 31-syllable long sentences than for 16-syllable long sentences. The effect of age on nasalance scores was not significant. The results of the study suggest that the vowel context and length of speech stimuli should be carefully considered when interpreting the nasalance scores.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.04b
• /
• pp.13-16
• /
• 2009

In this study, AlN thin films were deposited on a polycrystalline (poly) 3C-SiC buffer layer for surface acoustic wave (SAW) applications using a pulsed reactive magnetron sputtering system. AFM, XRD and FT-IR were used to analyze structural properties and preferred orientation of the AlN/3C-SiC thin film. Suitability of the film in SAW applications was investigated by comparing the SAW characteristics of an interdigital transducer (IDT)/AlN/3C-SiC structure with the IDT/AIN/Si structure at 160 MHz in the temperature range $30-150^{\circ}C$. These experimental results showed that AlN films on the poly 3C-SiC layer were highly (002) oriented. Furthermore, the film showed improved temperature stability for the SAW device, $TCF\;=\;-18\;ppm//^{\circ}C$. The change in resonance frequency according to temperature was nearly linear. The insertion loss decrease was about $0.033dB/^{\circ}C$. However, some defects existed in the film, which caused a slight reduction in SAW velocity.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.2
• /
• pp.10-16
• /
• 2003

An electronic ballast for driving automotive HID lamps is presented. The circuit topology is composed of a fly back converter, a half bridge inverter, and igniter using voltage doubler. A prototype was developed and tested on a 35W lamp with a 12V input voltage. To avoiding acoustic resonance the half bridge inverter is operated at 400Hz and provided a squared-wave voltage source to the lamp. The transient and steady state characteristics of the tested HID lapm are measured and analyzed.