• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.1238-1243
• /
• 2002

In this study, the validity of the acoustic impedance model and the estimation model by electro-acoustic analogy suggested by Maa for predicting the absorptive performance of multiple layer perforated plate systems is investigated. From the comparison between the experiment and calculation for the absorption performance of double layer perforated plate system, the calculated results of using Rao and Munjal's impedance model and transfer matrix method are closer to the experimental values than those of using Maa's impedance model and electro-acoustic analogy. Therefore, in order to apply the acoustic impedance model and the estimation model by electro-acoustic analogy suggested by Maa to the multiple layer perforated plate systems, it is necessary that the suggested acoustic impedance and estimation models should be re-examined.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.148-152
• /
• 2007

In recent days, on account of the cultural development and the improvement of citizen's consciousness level, it is the real situation that the construction of small-scaled Multi-Purpose Hall where various cultural events could be performed, is on increasing. However, since the most of Multi-Purpose Hall had been designed and built up without any consideration on Acoustic Factor, many problems are on occurring thereat. Since those small-scaled Multi-Purpose Hall have been mostly used with the finishing material which contains a high degree of Acoustic Absorption indiscreetly, both diffusion and reflection of sound are not establishing properly, and because thereverberation of sound is very low, in case of musical performance by musical instrument, its sound hears too arid and stiff, there occurs some acoustic defect such as it becomes difficult for music appreciation with sufficient timbre, so that the capability improvement on the matter is urgently requiring situation. Therefore, this Study has tried to seize the satisfaction level about the small-scaled Multi-Purpose Hall after betterment of the acoustic performance by appraise the acoustic condition of the Hall, using Auralization Technique that can experience Virtual Acoustic Field regarding to the small-scaled Multi-Purpose Hall as its object. It is deemed that such research result could be practically used as the useful material which enables to bring a reduction effect of construction cost as well asenhancement of the acoustic performance through its presupposition?control on the acoustic problem when construction or renovation of other similar small-scaled Multi-Purpose Hall in the future.

• 한국음향학회지
• /
• 제42권3호
• /
• pp.189-202
• /
• 2023

본연구에서는 홀의 건축형태에 따른 음향성능을 분석하였다. 홀에는 4가지 건축 형태가 있다. 장방형, 말발굽형, 서라운드형(Surround), 부채꼴형이다. 음향성능을 분석하는데 RT₆₀, EDT, C₈₀, BQI, LF, G_mid, G₁₂₅, ITDG 총 8개의 음향인자를 사용하였으며 건축형태에 따른 음향성능을 연구하기 위해 두 가지 접근 방식을 사용하였다. 첫째 전세계 유명 콘서트홀의 측정 데이터를 분석하였다. 설문조사로 조사한 홀의 주관적 선호도와 측정된 음향 인자 사이의 관계를 회귀 분석해 상관계수 R을 얻었으며 각 공연장 형태별 음향인자 측정데이터 평균을 구하였다. 각각의 음향 인자에 대한 가중치로 상관계수 R을 사용해 각 형태별 음향 성능을 계산하였다. 그 결과 장방형 홀과 말밥굽형 홀이 좋은 음향 성능을 보였으나 부채꼴형 홀의 음향성능은 좋지 않았다. 둘째, 각 건축형태별 3D 모델을 만들어 음향 시뮬레이션을 수행했다. 동일한 체적과 흡음계수를 가지는 장방형, 말밥굽형, 서라운드형, 부채꼴형 3D 모델을 만들어 시뮬레이션을 진행해 음향인자 값을 산출하였다. 또한 형태별 3D 모델의 임펄스 응답을 사용해 가청화 시제를 만들어 청감실험을 진행하였다. 그 결과 장방형 홀과 말굽 홀이 가장 좋은 음향성능을 나타냈으며 서라운드형과 부채꼴형은 상대적으로 떨어지는 음향성능을 나타내었다.

• 한국주거학회논문집
• /
• 제19권4호
• /
• pp.41-48
• /
• 2008

In this study, an analysis is carried out on the acoustic design for an indoor gymnasium scheduled to be built at Buan County, Chonbuk Province. By way of background, the study examines the case of a large-scale indoor gymnasium that has been constructed in the local area of Hangan-myeon. There are many examples whereby this gymnasium could be used not only as a sporting facility for the residents, but also as a multipurpose space for public performances such as leisure activities, lectures, assembling activities, theatre and concerts etc. In order to maximize the functional utilization of such an indoor gymnasium, it is important to simultaneously verify the acoustic capabilities of the space in terms of Definition of both Voice and Music. However, as a large-scaled athletic facility, the building was designed with a high ceiling-height to accommodate its functional characteristics. The space forms a Sound Focus whereby the sound is concentrated at a specific part, and because the vibration of sound is too loud due to its broad volume, acoustic defects arise such as a significant number of Echoes. Using this gymnasium as a precedent, this study proposes an acoustic design based on the drawings of the indoor gymnasium that is scheduled to be built at B County, Chonbuk Province. The gymnasium is equipped with an optimized acoustic condition passing through the Acoustic Simulation Phase. From the results of an Acoustic Simulation, we can design an indoor gymnasium that is equipped with a considerably satisfying and improved acoustic performance compared with the building before it was reformed. It is also considered that the use of such materials can fundamentally reduce construction costs and can improve acoustic performance, at the planning and design stages for similar sporting facilities in the future.

• 한국소음진동공학회논문집
• /
• 제27권2호
• /
• pp.139-147
• /
• 2017

Acoustic performance of splitter silencers was investigated by using 3-dimensional commercial software and experiments. Flow resistivity of sound absorbing material was indirectly estimated by using an impedance tube setup and a curve fitting method. In addition the acoustic impedance of perforated plate was determined by an empirical formulation. Such properties have been used as input parameters in the commercial software. The prediction for a splitter silencer with 1000 mm length was compared with the experimental result. The numerical method is then applied to identify the effects of number of splitters, length of splitters, absorptive material density, and porosity of a perforated plate on the performance of the splitter silencers. As the number and length of splitter increases, the acoustic performance significantly increases. Although the increase of density of absorptive material also increase the acoustic performance, a change in the density over a certain level hardly affect it. The increase of porosity will enhance the performance especially at higher frequencies.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(II)
• /
• pp.1591-1594
• /
• 1987

The Scanning Acoustic Microscope(SAM) is an image device which can display the small opaque material or the interior of solid. This paper showed the design of the acoustic lens which is an important factor of the Scanning Acoustic Microscope, and analyzed the performance of the acoustic lens. Finally, I experimented the image processing of the interior of solid through the Scanning Acoustic Microscope and the change of the acoustic image (resolution,contrast) by the change of F/number.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.885-891
• /
• 2003

Effects of each acoustic property on absorption characteristics of polyester fiber materials has been studied in this paper. It would be impossible for us to measure effects of each acoustic property by experimental method since we cannot make sound-absorbing materials in which only one of the properties is changed. We have adopted a numerical prediction method to carry out parameter studies for each acoustic property. And to get a general behavior of acoustic performance of the materials, the numerical simulation has been repeated to several cases of different bulk density. Finally we have obtained frequency-dependent control factors in the absorption performance which gives us design capability of acoustic absorbing materials.

• 한국소음진동공학회논문집
• /
• 제23권11호
• /
• pp.973-981
• /
• 2013

The main role of an acoustic diffuser is to diffuse reflected sound field spatially. Since the pioneering work of Schroeder, there have been investigations to improve its performance by using shape/sizing optimization methods. In this paper, a gradient-based topology optimization algorithm is newly presented to find the optimal distribution of reflecting materials for maximizing diffuser performance. Time-harmonic acoustic analysis in a two-dimensional acoustic domain is carried out where the domain is discretized by finite elements. Perfectly matched layers are placed to surround the domain to simulate non-reflecting boundary conditions. Design variables are assigned to each element of which material properties are interpolated between those of air and those of a rigid body. An approach to extract the reflected field from the total acoustic field is employed. To validate the effectiveness of the proposed method, design problems are solved at different frequencies. The performance of the optimized diffusers obtained by the proposed method is compared against that of the conventional Schroeder diffusers.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2008년도 춘계학술발표대회 논문집
• /
• pp.276-280
• /
• 2008

Korean Classical Music, as the abbreviated wording for 'Korean Music', is being used as the indicating phraseology for our traditional music that distinguishing from Western Music, the foreign music or foreign-styled popular music. Since such Korean Classical Music has the different acoustic characteristics from Western Music, it needs its own performance space for the special exclusive-use of Korean Classical Music. Likewise, even though the demand for the performance space of special exclusive-use for Korean Classical Music where Korean Classical Music is rendering, is on increasing tendency due to the increase of national concern about traditional culture art, since it is being planned without any concrete standard or method that gratifies the supreme listening condition, it is the real situation that a securement of the satisfying acoustic condition is very difficult, after the completion of construction. On such viewpoint, in order to evaluate the acoustic characteristics of the performance space of special exclusive-use for Korean Classical Music, based on the subjective response which reflects human being's psychological attribute at first, this Study has attempted to extract the proper evaluation vocabulary for appraisement on Korean Classical Music. The abstracted vocabulary in such way would be used significantly for Subjective Response Evaluation in order for the evaluation on the Acoustic Characteristics of the performance space of special exclusive-use for Korean Classical Music.

• 소음진동
• /
• 제9권4호
• /
• pp.738-746
• /
• 1999

The performance of muffler can be improved for a frequency range of interest by moving inlet and outlet locations. And optimal location of inlet and outlet can be determined to improve the acoustic performance. The optimum design using FEM, however, may take a very long time and be very hard to take inlet and outlet locations as design variables. In this paper, the acoustic performance of reactive type single expansion chamber muffler is predicted using higher order mode theory. The sensitivity analysis of transmission loss with respect to the location of inlet and outlet is suggested. And the acoustic power transmission coefficient for a frequency of interest is used as cost function. Optimum location of inlet and outlet is determined to minimize cost function by using SUMT algorithm.