• 한국음향학회지
• /
• 제13권2호
• /
• pp.23-29
• /
• 1994

본 논문에서는 원통형 압전 진동체에 대한 수중 방사 임피던스를 유한 배플 구조에서의 측정 결과와 무한 배플 구조에서의 이론 결과를 비교하여 방사 임피던스에 대한 배플의 영향을 규명하였다. 배플의 길이가 증가할수록 방사 임피던스의 측정치는 무한 배플에서의 이론치에 접하하며, 배플의 영항은 방사저항에서 보다 방사 리액턴스에서 더 지배적 임을 보인다. 따라서 음향 변환기의 설계시 무한 배플 구조에서의 방사 임피던스 이론 결과를 적용하기 위해서는 배플길이에 따른 임피던스의 보상이 수행되어야 한다.

• 말소리와 음성과학
• /
• 제2권2호
• /
• pp.43-50
• /
• 2010

English vowels can be divided into monophthongs and diphthongs depending on the number of vocal tract shapes. Diphthongs are usually produced with more than one shape. This study attempts to collect acoustical data of English diphthongs published by Hillenbrand et al.(1995) online and to examine acoustic features of the diphthongs for phoneticians and English teachers. Sixty three American males and females were chosen after excluding those subjects with different target vowels or ambiguous formant tracks. The author used Praat to obtain the acoustical data systematically at eleven equidistant timepoints over the diphthongal segment. Obvious errors were corrected based on the spectrographic display of each diphthong. Results show that the formant trajectories of the diphthongs produced by the American males and females appeared quite similar. When the female formant values were uniformly normalized to those of the males, almost a perfect collapse occurred. Secondly, the diphthongal movements on the vowel space appeared not linear due to the coarticulatory gesture for the following consonant. Thirdly, the average duration of the diphthongs produced by the females was 1.156 times longer than that of the males while the pitch ratio between the two groups turned out to be 1.746 with a similar contour over measurement points. The author concludes that English diphthongs produced by various groups can be compared systematically when the acoustical values are obtained at proportional timepoints. Further studies will be desirable on the comparison of English diphthongs produced by native and nonnative speakers.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.896-904
• /
• 2017

희박 예혼합 연소기는 NOx 배출 규제를 만족시키지만, 연소불안정 현상을 야기하는 단점을 갖고 있다. 이때 연소불안정 현상은 연소기 내부에서 열발생 섭동과 음향 압력 섭동 사이의 피드백 관계로부터 도출된다. 특히 항공용 엔진에 대한 배출 가스 규제가 강화되면서, 환형 연소기에서의 연소불안정 연구에 대한 관심이 크게 증가하고 있다. 본 연구에서는 환형연소기에서의 길이방향 및 환형 방향의 모드까지 계산할 수 있는 열음향 네트워크 모델을 개발 및 사용하였고, 이때 연소 모델은 화염전달함수를 적용하였다. 이와 같은 네트워크 모델을 사용하여 벤치마킹한 환형연소기의 실험데이터와 비교 분석하여 연소불안정 해석을 진행하였다.

• 한국철도학회논문집
• /
• 제10권1호
• /
• pp.1-6
• /
• 2007

Railway wheels in service are regularly checked by ultrasonic testing, acoustic emission and eddy current testing method and so on. However, ultrasonic testing is sometimes inadequate for sensitively detecting the cracks in railway wheel which is mainly because of the fact of crack closure. Recently, many researchers have actively fried to improve precision for defect detection of railway wheel. The development of a nondestructive measurement tool for wheel defects and its use for the maintenance of railway wheels would be useful to prevent wheel failure. The induced current focusing potential drop(ICFPD) technique is a new non-destructive tasting technique that can detect defects in railway wheels by applying on electro-magnetic field and potential drops variation. In the present paper, the ICFPD technique is applied to the detection of surface and internal defects for railway wheels. To defect the defects for railway wheels, the sensor for ICFPD is optimized and the tests are carried out with respect to 4 surface defects and 6 internal defects each other. The results show that the surface crack depth of 0.5 mm and internal crack depth of 0.7 mm in wheel tread could be detected by using this method. The ICFPB method is useful to detect the defect that initiated in the tread of railway wheels

• International Journal of Automotive Technology
• /
• 제7권1호
• /
• pp.43-49
• /
• 2006

In this paper, an index for the evaluation of a vehicle intake booming noise and intake sound quality were developed through a correlation analysis and a multiple factor regression analysis of objective measurement and subjective evaluation data. At first, an intake orifice noise was measured at the wide-open throttle test condition. And then, an acoustic transfer function between intake orifice noise and interior noise at the steady state condition was estimated. Simultaneously, subjective evaluation was carried out with a 10-scale score by 8 intake noise and vibration expert evaluators. Next, the correlation analysis between the psychoacoustic parameters derived from the measured data and the subjective evaluation was performed. The most critical factor was determined and the corresponding index for intake booming noise and sound quality are obtained from the multiple factor regression method. And, the optimal design of intake system was studied using the booming noise and the sound quality evaluation index for expectation performance of intake system. Conclusively, the optimal designing parameters of intake system from noise level and sound quality whose point of view were extracted by adapting comparative weighting between the booming noise and sound quality evaluation index, which optimized the process. These work could be represented guideline to system engineers, designers and test engineers about optimization procedure of system performance by considering both of noise level and sound quality.

• 한국군사과학기술학회지
• /
• 제18권4호
• /
• pp.350-357
• /
• 2015

Many countries have been developing and operating an underwater surveillance system in order to protect their oceanic environment from infiltrating hostile marine forces which intend to lay mines, conduct reconnaissance and destroy friendly ships anchored at the harbor. One of the most efficient methods to detect unidentified submarine approaching harbor is sensing variation of magnetism of target by magnetic sensors. This measurement system has an advantage of high possibility of detection and low probability of false alarm, compared to acoustic sensors, although it has relatively decreased detection range. The contents of this paper mainly cover the analysis of possible effectiveness of magnetic sensors. First of all, environmental characteristics of surveillance area and magnetic information of simulated targets has been analyzed. Subsequently, a signal processing method of separating target from geomagnetic field and methods of estimating target location has been proposed.

• 한국군사과학기술학회지
• /
• 제20권4호
• /
• pp.505-513
• /
• 2017

Cavitation is a phenomenon caused by vapour cavities that is produced in rapid pressure changes. When the cavitation happened, the sound pressure level of a underwater radiated noise is increased rapidly. As a result, it can increase the probability of the identification or classification of a our warship's acoustic signature by an enemy ship. However, there is a problem that it is hard to precisely detect the occurrence of a cavitation noise. Therefore, this paper presents recent improvements in terms of the cavitation noise measurement by using continuous wavelet transform and DEMON(Detection of Envelope Modulation on Noise) signal processing. Then, we present that the suggested scheme is more suitable for detecting the cavitation than existing algorithms.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.329-330
• /
• 2007

Decay processes of accumulated charge in e-beam irradiated polymers during elevating temperature are observed using pulsed electro-acoustic measurement system. Since the polymeric materials have many superior properties such as light-weight, good mechanical strength, high flexibility and low cost, they are inevitable materials for spacecrafts. In space environment, however, the polymers sometimes have serious damage by irradiation of high energy charged particles. When the polymers of the spacecraft are irradiated by high energy charged particles, some of injected charges accumulate and remain for long time in the bulk of the polymers. Since the bulk charges sometimes cause the degradation or breakdown of the materials, the investigation of the charging and the decay processes in polymeric materials under change of temperature is important to decide an adequate material for the spacecrafts. By measuring the charge behavior in e-beam irradiated polymer, such as polyimide or polystyrene, it is found that the various accumulation and decay patterns are observed in each material. The results seem to be useful and be helpful to progress in the reliability of the polymers for the spacecraft.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1992-1993
• /
• 2007

Decay processes of accumulated charge in e-beam irradiated polymers during elevating temperature are observed using pulsed electro-acoustic measurement system. Since the polymeric materials have many superior properties such as light-weight, good mechanical strength, high flexibility and low cost, they are inevitable materials for spacecrafts. In space environment, however, the polymers sometimes have serious damage by irradiation of high energy charged particles. When the polymers of the spacecraft are irradiated by high energy charged particles, some of injected charges accumulate and remain for long time in the bulk of the polymers. Since the bulk charges sometimes cause the degradation or breakdown of the materials, the investigation of the charging and the decay processes in polymeric materials under change of temperature is important to decide an adequate material for the spacecrafts. By measuring the charge behavior in e-beam irradiated polymer, such as polyimide or polystyrene, it is found that the various accumulation and decay patterns are observed in each material. The results seem to be useful and be helpful to progress in the reliability of the polymers for the spacecraft.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.505-506
• /
• 2006

PD(partial discharge) occurred from variable PD sources in air may be the cause of breakdown in high voltage equipment which affect huge outage in power system. Identification and localization of PD sources is very important for engineer to cope with huge accident beforhand. PD phenomena can be detected by acoustic emission sensor or electromagnetic sensor like antenna. This paper has investigated the identification method using PCA(principal component analysis) for the PD signals from variable PD sources, for which the electric field distribution and PD inception voltages were simulated by using commercial FEM program. PD signals was detected by ultra wideband antenna. Their own features were extracted as the frequency coefficients transformed with FFT(fast fourier transform) and used to obtain independent pincipal components of each PD signals.