• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1-6
• /
• 2011

In this study, wind tunnel test were conducted to improve an aerodynamic performance of HEMU400X pantograph system with 4 types of pantograph housing models. Experimental models were 1/4 scaled pantograph system, 1/4 scaled ground plate which is scaled down to real roof shape of HEMU-400x, and 4 types of pantograph housing models. The free stream of wind tunnel were 20, 40, 60, 70m/s. The lift and drag forces were measured with 2-axis load cell. And, Total pressure were measured with rake in the wake region of panhead. In addition, Surface flow visualization by tufts were performed to know flow characteristics around pantograph housing. According to the results of force tests and surface visualizations, pantograph housing shape is important part because the shape affects to pantograph system. Therefore, it is considered that adaption of pantograph housing is more advantageous to decrease drag and acoustic noise.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.7
• /
• pp.56-66
• /
• 1999

Thermoacoustic oscillation is a significant problem in cylindrical-type combustors such as common internal combustion engines, industrial furnaces, gas turbine, etc. This kind of low frequency oscillation can lead to serious consequences such as destruction of the combustor and production of strong noise. The accurate numerical simulation of thermoacoustic phenomena is a complex and challenging problem, especially when considering the chemical reaction of mixtures. As with other simulations of aerodynamics and aeroacoustics, the direct computation of thermoacoustic phenomena requires that Navier-Stokes equations be solved using accurate numerical differentiation and time-marching schemes, with non-reflecting boundary conditions. The numerical approach used here aims at qualitative analysis and efficient prediction of those problems, not at the development of an accurate scheme. The numerical prediction developed in this work is shown to be reasonably matched with experimental result.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.1
• /
• pp.302-309
• /
• 2017

The ageing of XLPE cable insulation will lead to the accelerating accumulation of space charge, which will greatly affect the safe operation of the HVDC cable. In order to investigate the influence of different ageing modes on the space charge distribution of the HVDC cable, thermal stressed, electrical stressed and electro-thermal stressed endurance tests were carried out on the XLPE peelings. The tested XLPE peelings were obtained from 160kV HVDC cable insulation. The endurance tests were carried at thermal stress of 363K, electrical stress of 20kV/mm DC and a combination of both. The Pulsed Electro-Acoustic (PEA) method was used to measure the space charge distribution of the samples. The influences of ageing on the trap energy distribution were analyzed based on the isothermal relaxation theory and the decay characteristics of the space charge. The results showed that thermal ageing would help to improve the crystalline morphologies of the XLPE at the early stage. The total amount of space charge decreased compared to the ones before thermal ageing. The long term of electrical stress would result in the cleavage of polymer molecule chains which would intensify the accumulation of space charge and increase the density and depth of electron traps. With a combination of electrical and thermal stress, the injection and migration of space charge were more significant. Besides, the depth and density of electron traps increased rapidly with the increase of endurance time.

• Proceedings of the KSPS conference
• /
• 1996.02a
• /
• pp.9-22
• /
• 1996

Among the various dysarthric subtypes, diagnosis of ataxic dysarthria is rendered when the speech characteristics include imprecise and irregular articulatory breakdowns, marked degree of speech rate impairment, overall monopitch and monoloudness, and respiratory-articulatory incoordination. Traditionally, speech pathologists have relied only upon their ‘ears’ to describe and evaluate the dysarthric speech. A statement of percentage of correct words identified by a listener do not provide so much more than an index of severity. Within the same perceptual dimension, a carefully constructed speech intelligibility test can specify patterns of errors. The patterns can contain a diagnostic value as well as Provide strategies for remediation. The phonetically transcribed texts on single words and a standard passage, 'kail' produced by an ataxic dysarthria are presented in this report, with an emphasis of the articulatory error analysis. Furthermore,, acoustic tools [e.g., spectrography to measure formant transitions, segment durations, consonant spectra, etc.] are utilized to serve as basic measures that objectively document patients' speech intelligibility, Finally, the treatment methods [e.g., spectrography as a visual feedback, gestural reorganization using pacing method, DAF (Delayed Auditory Feedback)] to modify the dysarthric behaviors are presented.

• Korean Journal of Optics and Photonics
• /
• v.17 no.4
• /
• pp.366-370
• /
• 2006

An optical microphone incorporating a reflective diaphragm and a fiber-optic head was demonstrated. The diaphragm was made of a micromirror membrane which is suspended by a silicon bar connected to a frame, allowing fer a displacement induced by acoustic waves. A compact, simple optical head was implemented by exploiting a single multimode fiber. For the assembled microphone, the static characteristics were investigated to find the operation point defined as the optimum distance between the head and the diaphragm, and a flat frequency response with a variation of $\sim$2dB for the range of up to 2 kHz was accomplished.

• Speech Sciences
• /
• v.12 no.3
• /
• pp.175-183
• /
• 2005

In this study, realization of strong and weak syllables in English by Korean leaners with low English proficiency was examined through experiment. The aspects of three acoustic characteristics-duration, pitch, amplitude-were measured and compared with native speakers of English. It was assumed that production of duration, pitch and amplitude of strong and weak syllable by Korean learners would be different from that of English native speakers. According to the production experiments, English native speakers produced strong syllable longer, higher and louder than weak syllable. However, Korean leaners produced strong syllable higher and louder than weak syllable, but not longer enough. Specifically, weak syllable by Korean leaners was longer and strong syllable shorter than native speakers. Furthermore, the difference in duration of syllables between Korean leaners and English native speakers is more significant than pitch and amplitude. As a result, the duration was more important cue for the realization of stress than pitch and amplitude. However, Korean leaners did not produce duration of stressed syllables as English native speakers did, even though they produce the pitch and amplitude of stressed syllable in a similar way to native speakers. The reasons for those were considered, too.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.11
• /
• pp.2328-2335
• /
• 2002

A hybrid composite material has many potential usage due to the high specific strength and the resistance to fatigue, when compared to other composite materials such as fiber reinforced plastic(FRP) and metal matrix composite(MMC). However, the fracture mechanism of hybrid composite material is extremely complicated because of the bonding structure of metals and FRP. In this study, Al 7075 sheets and carbon epoxy preprags were used to fabricate the hybrid composite. Recently, nondestructive technique has been used to evaluate the fracture mechanism of these composite materials. AE technique was used to clarify the microscopic damage behavior and failure mechanism of A17075/CFRP hybrid composite. It was found that AE paralneters such as AE event, energy and amplitude were effective to evaluate the failure process of Al 7075/CFRP composite. In addition, the relationship between the AE signal and the characteristics of fracture surface using optical microscope was discussed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.11
• /
• pp.2336-2341
• /
• 2002

When WC and group IV elements are added to Ti(C,N)-Ni cermet, microstructures of the cermet is changed. The change effects directly on the property of the material. In this study, the amount of WC and group IV elements of Ti(C,N) cermet tool was investigated. The composition of WC was changed from 5 to 20wt% to determine the effect of WC on the cutting performance of cermet tool. The more WC was added, the longer the tool life of the cermet tool was. The cermet with lwt% ZrC and l4wt% WC showed the best cutting performance among the investigated cermet tools. The cutting performance of cermet cutting tools suggests the possibility in interrupted cutting for reliability test experimentation was performed repeatedly with $Ti(C_{0.7},N_{0.3})- l4WC-1ZrC-20Ni$ cermet tool machining SCM440. The flank wear of cermet cutting tool at given time condition is suitable for Normal distribution and Log normal distribution by Chi squared test.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.6
• /
• pp.922-930
• /
• 2004

An experimental investigation was performed to study on the generation of air bubble and air core with swirling flow in a horizontal cicular tube. To determine some characteristics of the flow, 2D PIV technique is employed for velocity measurement in water. The experimental rig is manufactured from an acryl tube. The test tube diameter of 80mm, and a length of 3000mm. The used algorithm is the gray leve cross-correlation method(Kimura et al. 1986). An Ar-ion laser is used and the light from the laser(500mW) passes through a probe to make two-dimensional light sheet. In order to make coded images of the tracer particles on one frame, an AOM(Acoustic-Optical Modulator) is used. The maximum axial velocities showed near the test tube wall at y/D =0.1 and y/D =0.9 along the test tube. The higher Reynolds number increase, the lower axial velocities are showed in the center of the test tube. The air bubbles are generated from Re =10,000 and developed into air core from the recirculating water pump rpm equal 30Hz. The pressure and temperature are measured across the test tube at X/D=3.33.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.7
• /
• pp.2375-2385
• /
• 1996

As a compression wave is emitted from a duct, an impulsive wave generates and causes an impulsive noise that is at present a serious environmental noise pollution. In order to clarify the acoustic characteristics of the noise and to reduce their pressure levels, a series of model experiments were conducted on the impulsive waves emitted from an open end of a shock tube. The impulsive waves with various intensities were obtained by controlling the operation pressure ratio of the shock tube. Various kinds of silencers such as the exit boxes with baffle plates, were applied to the duct exit to reduce the impulsive noises. The effects of geometry of silencers and shock Mach number on the noise reduction were clarified. From the measurements of sound pressure level, it was found that installing the baffle plate into the exit box is effective in lowering the noise level at far fields, and that the recommendable geometries of silencer are L/D=1, H/D=1 and H/D=0.75.