• 한국소음진동공학회논문집
• /
• 제23권10호
• /
• pp.920-927
• /
• 2013

The requirement of acoustic performance about underwater acoustic material which is used in underwater environment more increases. Underwater acoustic material was made by viscoelastic material such as a rubber and a polyurethane etc. In order to increase an acoustic performance, several kinds of inclusions were added to viscoelastic material. In this paper, acoustic modelling and analysis techniques were introduced and the acoustic characteristics of underwater acoustic material were studied. Echo reduction and transmission loss were calculated with volume fraction of inclusion in the material. Also the characteristic impedance and the input impedance of underwater acoustic material were obtained and effects on the echo reduction and transmission loss of material were discussed.

• 대한기계학회논문집B
• /
• 제23권1호
• /
• pp.114-122
• /
• 1999

Reignition as special cases of acoustic pressure responses of flame are numerically studied by employing methanol droplet flame as a laminar flamelet. Quasi-steady flame responses occur in the range of small amplitude, low frequency oscillation. Reignition phenomena can occur when, by increasing the frequency of large amplitude acoustic pressure, the magnitude of characteristic acoustic time is the same order of that of characteristic reaction time of flames. And more increasing of amplitude of acoustic pressure induces the direct extinction of flame. Flame can sustain its own intensity even under the steady extinction temperature in case of high frequency acoustic oscillation, and this tendency is remarkable with increasing frequency. Reignition regime with respect to amplitude and frequency of acoustic pressure doesn't exist in low frequency($10^2$ Hz, in this study), but broadens with frequency of acoustic pressure.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.885-891
• /
• 2003

Effects of each acoustic property on absorption characteristics of polyester fiber materials has been studied in this paper. It would be impossible for us to measure effects of each acoustic property by experimental method since we cannot make sound-absorbing materials in which only one of the properties is changed. We have adopted a numerical prediction method to carry out parameter studies for each acoustic property. And to get a general behavior of acoustic performance of the materials, the numerical simulation has been repeated to several cases of different bulk density. Finally we have obtained frequency-dependent control factors in the absorption performance which gives us design capability of acoustic absorbing materials.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.763-766
• /
• 2004

Recently, various acoustic artifacts that contains speaker have been produced such as cellular phone. Speaker consists of diaphragm generating sound and coil vibrating diaphragm. Generally, good speaker means that it has a wide frequency range, high output power rate to input power and flat sound pressure level in specified frequency range. Acoustic characteristic was estimated through the experiment and computer simulation, or sound power was controlled with acoustic sensitivity in a natural frequency range fer last decade. However, the flatness of sound pressure level has not been considered to enhance the sound quality of a speaker. Tn this study, a method for speaker design is proposed for a good acoustic characteristic, which is flatness of SPL(sound pressure level) and wideness between the first and second natural frequency. SYSNOISE is used fer acoustic analysis and ANSYS is used for harmonic response analysis and modal analysis. Optimization for acoustic characteristics of a speaker diaphragm is performed using ModelCenter. All analyses are done within a frequency domain. And we confirm that the experimental and computational simulations have similar trend.

• 한국통신학회논문지
• /
• 제36권2C호
• /
• pp.119-125
• /
• 2011

본 논문에서는 경로감쇠에 기반한 실내 음향측위 시스템에 활용할 수 있는 실내 음향신호의 경로 감쇠 특성을 분석한다. 실내 음향시스템은 주로 25 평방미터 이내의 협소한 공간에서 적용되기 때문에 기존에 정의된 넓은 공간에서의 모형만으로는 경로감쇠에 기반한 실내음향측위 시스템을 설계할 수 없다. 따라서 본 논문에서는 자유음장 모형과 더불어 실내공간의 온도와 습도, 그리고 대기의 주요구성성분의 홉음영향을 고려한 실내 음향신호 경로 감쇠 모형을 보이고, 무향실에서 실제 실험을 통해 모형의 적절성을 평가한다. 실험을 위해서 1kHz-20kHz의 단일 주파수를 갖는 감쇠정현파를 사용한다. 그리고 실험 음원으로 두개 이상의 단일 주파수를 갖는 감쇠정현파를 함게 사용할 대의 경로감쇠를 보이고, 이를 분석한다.

• 한국안전학회지
• /
• 제9권4호
• /
• pp.11-16
• /
• 1994

Acoustic emission technique is applied to the fatigue crack initiation in a carburized gear tooth. Acoustic emission test performed on carburized gear and three-point bending test equal to carburized gear hardness. The marked acoustic emission are detected at the early stage of crack initiation measured by a crack gauge and the final stage just before the tooth failure. The estimated acoustic emission energy rate are characteristic of the measured acoustic emission.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2004년도 춘계학술대회 논문집
• /
• pp.55-60
• /
• 2004

이 논문은 기적음이 선박 선교에 전달되는 음향전달특성의 측정기술에 관한 것이다. 실습선 ‘새누리호’를 대상으로 선교 내부에 전달되는 기적음을 선교문 개폐상태에 따라서 B＆K 2260D으로 측정한 후, B＆K 7830소프트웨어를 이용하여 주파수특성을 축출하였다. 측정한 주파수 특성을 이용하여 주파수 샘플링에 의한 FIR 필터 설계법으로 128차 FIR 필터를 구축하였다. 그리고, 기적원음과 FIR 필터의 콘볼류션 연산으로 실험음을 생성한 후, 6단계 평가지표를 이용하여 측정한 음향전달특성을 평가하였다. 평가결과, 실험음이 실제 선교에서 듣는 음과 '유사함'을 나타내는 A／sub s／=3.3∼4.7로 나타나서 본 연구에서 개발한 기법이 선교의 음향전달특성 측정기술로서 유효함을 확인하였다.

• 비파괴검사학회지
• /
• 제25권6호
• /
• pp.451-458
• /
• 2005

The effects of fiber orientation on acoustic emission(AE) characteristics have been studied for various composite laminates. Reflection and transmission optical microscopy were used to investigate the damage zone of specimens. AE signals were classified through short time Fourier transform(STFT) as different types: AE signals with a high intensity and high frequency band were due to fiber fracture, while weak AE signals with a low frequency band were due to matrix cracking and/or interfacial cracking. Characteristic feature in the rate of hit-events having high amplitudes showed a procedure of fiber breakages, which expressed the characteristic fracture processes of notched fiber-reinforced plastics with different fiber orientations. As a consequence, the behavior of fracture in the continuous composite laminates could be monitored through nondestructive evaluation(NDE) using the AE technique.

• 소음진동
• /
• 제7권5호
• /
• pp.781-787
• /
• 1997

A new method is presented to determine two fundamental acoustic quantities of sound-absorbing materials such as characteristic impedance and propagation constant. In this study, the surface acoustic impedances of sound-absorbing materials are measured using the impedance tube and the anechoic chamber to determine the above acoustic quantities. The measured results are given for two typical sound-absorbing materials(glass wool and urethane foam) int the frequency range between 150 and 1, 600 Hz. The results are verified by other two known methods, which are Smith & Parrott method and Utsuno et al. method. The absorption coefficients calculated from the empirical models(Miki model for glass wool and Jung model for urethane foam) and two quantities by present method are in good agreement with the measured values.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2012년도 제38회 춘계학술대회논문집
• /
• pp.342-349
• /
• 2012

고 에너지 물질 초음속 화염의 전파에 대한 gap의 효과를 이해하기 위하여 characteristic acoustic impedance theory와 수치해석이 적용되었다. 여러 개의 gap이 위치하고 있는 화약의 한 끝에 초음속 화염이 발생되도록 하여, 여러 gap에 전파되나가는 연속적인 화염에 대한 이해를 시도 하였다. 현재의 높은 차원의 다물질 해석은 SNU-Hydropack code에 포함되어 있는 복잡한 경계면 추적 알고리즘의 타당성에 대한 의미 있는 결과를 제시했다.