• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제28회 춘계학술대회논문집
• /
• pp.353-357
• /
• 2007

본 연구의 목표는 고 에너지원이 고 출력 펄스 레이저를 이용하여 금속 표면에서 발생하는 충격파를 분석하고 이를 다른 분야에 적용하는 것이다. 금속 표면 일정 단면에 펄스 레이저를 조사시키면 충격파가 발생하며 이 충격파는 음향 임피던스에 의해 레이저가 조사된 반대 방향으로 극 초음속(4000m/s 이상)으로 매우 짧은 시간동안 진행하며 다른 표면에서도 고 에너지에 의해 충격파가 발생한다. 이와 함께 얇은 금속은 순간 탄성변형을 일으킨다. 짧은 시간에 발생하는 모든 현상은 ICCD카메라를 통해 확인 할 수 있다. 이 실험의 목적은 고 에너지에 의해 발생한 충격파를 이용하여 미립자를 매우 빠른 속도로 가속하는데 있다.

• 수산해양기술연구
• /
• 제60권3호
• /
• pp.277-289
• /
• 2024

Climate change has led to a significant increase in jellyfish populations globally, causing various problems. For power plants that use nearby seawater for cooling, the intrusion of jellyfish into intake systems can block the flow, leading to reduced output or even shutdowns. This issue is compounded by other small marine organisms like shrimp and salps, making it urgent to develop solutions to prevent their intrusion. This study addressed the problem using the BioSonics DT-X 120 kHz scientific fish finder to conduct preliminary tank experiments. We also deployed underwater acoustic and camera buoys around the intake of nuclear power plant, utilizing a bidirectional communication system between sea and land to collect data. Data collection took place from July 31, 2023 to August 1, 2023. While harmful organisms such as jellyfish and salps were not detected, we successfully gathered acoustic data on small fish measuring backscattering strength (SV). Analysis showed that fish schools were more prominent in the evening than during the day. The highest fish distribution was observed at 3:30 AM on July 31 with an SV of -44.8 dB while the lowest was at 12:30 PM on the same day with an SV of -63.4 dB. Additionally, a solar-powered system was used to enable real-time data acquisition from sea buoys with smooth communication between the land server and the offshore buoy located 1.8 km away. This research developed an acoustic-based monitoring system for detecting harmful organisms around the intake and provided foundational data for preventing marine organism intrusion and planning effective measures.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2579-2584
• /
• 2007

A digital micro holographic particle tracking velocimetry (HPTV) system consisting of a high-speed camera and a single laser with acoustic optical modulator (AOM) chopper was established. The digital micro HPTV system was applied to water flow in a micro curved-tube for measuring instantaneous 3-D velocity field data consecutively. The micro curved-tube is using to reproduce the dorsal aorta or utilize in various lap-on-a-chip. The temporal evolution of a three-dimensional water flow in the micro curved-tube (the curvature, ${\kappa}$=1/${\phi}$, 2/${\phi}$, 4/${\phi}$, 8/${\phi}$) of 100 ${\mu}m$ and 300 ${\mu}m$ inner diameters was obtained and mean velocity field distribution was obtained by statistical-averaging the instantaneous velocity fields.

• 한국생산제조학회지
• /
• 제22권4호
• /
• pp.723-729
• /
• 2013

The contraction and expansion noise of a refrigerator are investigated, and some effective methods are proposed to reduce the level and occurrence frequency of noise. First, the noise of a refrigerator is measured to estimate the frequency spectrum and occurrence frequency of noise. Second, a sound visualization was conducted using an acoustic camera to determine the location of the noise source. From the results, it was observed that the internal part mainly producing noise was the third shelf in the freezer room. A method to estimate the acceleration on the location of the noise source is introduced to analyze the contraction and expansion noise precisely and accommodate experimental convenience. Noise reduction methods such as the replacement of the existing shelf with glass shelves, adoption of rail slides, and increase of roughness on the contact surface of the shelf are proposed and tested.

• 한국산업융합학회 논문집
• /
• 제6권3호
• /
• pp.253-259
• /
• 2003

An experimental study was performed for turbulent flow behind a circular and a square cylinder by using 2-D PIV(Particle Image Velocimetry) technique in a cylindrical tube. The Reynolds number investigated were 10,000, 30,000 and 50,000. The measuring system consists of CCD camera. Ar-ion laser, image grabber and a host computer. The mean velocity vector, time mean axial velocity, turbulent intensity and Reynolds shear stress were measured along the test tube. The results are compared each other for the circular and the square cylinder.

• 한국안전학회지
• /
• 제17권1호
• /
• pp.25-32
• /
• 2002

The tensile tests for [0/90]s, [90/0]s, and $[0/{\pm}45/90]s$ laminate composite were accomplished with acoustic sensor and failure processes were recorded by a video camera in real time. Also SEM examinations for fracture and side surface were carried out. The purpose of study is estimation of the failure mechanism and the mechanical properties effected by lay-up orientation for CFRP laminate composite with the hole notch. From the results, mechanical properties were obtained and they are similar between two kinds of cross-ply orientation in CFRP laminate composites, but not on $[0/{\pm}45/90]s$. And accordings to increasing the load, accumulate AE count was increased, regardless of lay-up orientation. Futhermore, failure mechanism was described by a video monitoring and SEM.

• 소음진동
• /
• 제7권2호
• /
• pp.255-260
• /
• 1997

This paper describes 3-dimensional volume array of 4 microphones including a reference microphone which is capable of imaging wideband noise source position in 2-dimensional image plane. The cross correlation function and corresponding imaging function between a reference microphone and other microphone, are derived as a function of noise source position. The magnitude of the imaging function gives noise source mapping in image plane. Since the image plane is selective from a rectangular and a cylindrical plane, noise source position information such as range and bearing relative to the array is identified very much easily. Simulation results for typical source configurations confirms the applicability of the proposed array in noise control field.

• 한국자동차공학회논문집
• /
• 제3권5호
• /
• pp.38-46
• /
• 1995

In this paper, an experimental study on the effects of the impact damage and the perforation characteristic of CFRP laminates with different fiber stacking orientation and ply number was done through an observation of interrelations between the impact energy vs. transmitted energy and the impact energy vs. absorbed energy per unit volume. The velocities of the ball before or after impact are measured by the high-speed camera. And when CFRP laminates are subjected to tranverse impact by a steel ball(${\phi}10$), the delamination shapes generated by impact damage are observed by using SAM (Scanning acoustic Microscope).

• 비파괴검사학회지
• /
• 제30권3호
• /
• pp.200-206
• /
• 2010

In ultrasound-excited thermography, the injected ultrasound to an object is transformed to heat and the appearance of defects can be visualized by thermography camera. The advantage of this technology is selectively sensitive to thermally active defects. Despite the apparent simplicity of the scheme, there are a number of experimental considerations that can complicate the implementation of ultrasound excitation thermography inspection. Factors including acoustic horn location, horn-crack proximity, horn-sample coupling, and effective detection range all significantly affect the detect ability of this technology. As conclusions, the influence of coupling pressures between ultrasound exciter and specimen was analyzed, which was dominant factor in frictional heating model.

• 자원환경지질
• /
• 제49권2호
• /
• pp.121-134
• /
• 2016

서태평양 공해 해저산의 다중빔 음향측심자료와 해저면 영상관측 자료를 활용하여 해저산 정상부와 경사면에 피복된 망간각의 공간 분포 변화 양상을 파악하였다. 다중빔 음향측심기를 이용하여 구분된 해저산의 지형 특성은 정상부 면적의 약 70% 이상이 경사가 $5^{\circ}$ 미만으로 비교적 평평한 지대로 이루어져 있으나 후방산란강도는 해저면의 매질변화를 지시하는 이봉분포를 보였다. 이 이봉분포에서 -30 dB이상의 높은 최빈값은 경사면과 정사부 가장자리 지역에서 우세하였으며 -30 dB이하의 낮은 최빈값은 정상부 중앙지역에서 우세하였다. 해저면 표층의 영상자료와 후방산란 자료의 연관성을 분석한 결과, 정상부 중앙지역은 경사면에 비해 상대적으로 완만한 기울기와 미교결 퇴적물만 존재하여 후방산란이 낮게 나타난다. 반면, 정상부 가장자리 및 경사면은 퇴적물이 없어 기반암이 노출되거나 망간각이 피복되어 후방산란이 높게 나타남을 보여준다. 따라서 다중빔 음향측심조사를 통해 획득된 후방산란 자료와 해저면의 퇴적물 및 망간각 분포 사이의 상관관계가 높다는 것을 알 수 있다. 이 연구결과는 다중빔 음향측심조사를 통해 획득된 후방산란 자료를 활용하면 기요형태의 해저산에 피복된 망간각의 전체적인 분포 규모를 확인할 수 있음을 의미한다. 따라서 해저산 지역의 망간각 개발 유망구역을 선별하는데 후방산란 자료가 유용하게 활용될 수 있을 것이다.