• Korean Journal of Veterinary Research
• /
• v.23 no.2
• /
• pp.137-148
• /
• 1983

This study was made for the better information of the male reproductive system on the meat-type drake, Cherry Belly X White Golden. The epithelium of ductules of epididymal region and deferent duct were observed histologically and histochemically with the progress of their development. India-ink absorbability on the luminal epithelium was also investigated after the administration of India-ink. The results are as follows; 1. Rete testis and various round ductules in immature form appeared in epididymis within 6 weeks after hatching, and simple cuboidal and simple columnar epithelium were found in the epithelia of the ductules within 8 weeks after hatching. Larger ductules were found on epididymal surface which was in the developing stage near to the immature efferent ductule. From 10th to 20th week, various ductules appeared in epididymis, and developing form of efferent ductules were much more increased on epididymal surface. The luminal epithelium of the ductules were composed of ciliated simple columnar and pseudostratified ciliated columnar cells. At the same time, deferent duct appeared. From the 21th week, various ductules in epididymis became abruptly matured. Lumen of rete testis was lined by simple squamous or simple cuboidal epithelium, and that of efferent ductules, having many folds and being larger than any others were lined by pseudostratified ciliated columnar epithelium in which ciliated columnar cells, non-ciliated cells(clear cells) and basal cells were noted. Connecting tubules of star shaped lumen were composed of pseudostratified ciliated columnar epithelium in which ciliated columnar cells, nonciliated cells, and basal cells were observed. The luminal surface of epididymal ducts was smooth and has thick pseudostratified columnar epithelium which was composed of high columnar cells and basal cells. From 26th week after hatching, sperm pooling was started in various ductules. 2. From 4th to 10th week, simple cuboidal epithelium of deferent duct transformed to simple columnar epithelium with the progress of aging. At the basement of epithelium, clear round cells were noted. From 12th to 20th week, high columnar cells with enlongated nucleus were noted on the luminal border of deferent ducts, forming folds of pseuclostratified columnar epithelium. From 20th week, the deferent duct started to have septa in it's lumen and composed mainly of pseudostratified columnar epithelium, and round cells disappeared. From 20th week, the lumen diameter of deferent duct became wider with the progress of aging, but there was no difference among the values of lumen diameter in upper, middle, and lower part of deferent ducts. At 26th week, the pooling period of sperms in deferent ducts, the lumen diameter became rapidly widen, especially in the lower part of deferent ducts. Thickness of muscular layer of ductus deferens showed gradual growth within 24 weeks but did abrupt thickening from 26th week. 3. Saliva resistant PAS granules were dotted on the top of nucleus in efferent ductules epithelium but the amount of the granules were little in the connecting ductules's epithelium. The granules reactive to acid phosphatase were abundant in the some epithelial cells of efferent ductules and connecting ductules, especially above the nucleus of cells. The granules reactive to alkaline phosphatase were noted on the luminal border of efferent ductules. Parts of free border of efferent ductules and middle portion of deferent ducts were stained slightly by alcian blue technique. India ink granules were found mainly in the epithelium of efferent ductules but were few in that of connecting ductules.

• Horticultural Science & Technology
• /
• v.29 no.3
• /
• pp.247-254
• /
• 2011

The agronomic characteristics, nutritional contents, and insect response of the potato clones transformed with a glufosinate ammonium resistance gene were evaluated. Among the 4 transgenic potato clones, the Bar 3 clone was selected as a promising one for commercialization. The Bar 3 clone showed similar tuber yield capacity but higher herbicide resistance as compared with the non-transgenic potato cv. Dejima. The herbicide resistance of the Bar 3 clone was more than 5 times higher when tested with the herbicide concentration recommended by the producer. The major agronomic characteristics of the Bar 3 clone were not different from those of the non-transgenic Dejima. The annual variation in yields and agronomic characteristics showed similar tendency for 2 years from the third to fourth generation after transformation. The tubers of the Bar 3 clone also showed low occurrence in common scab and physiological disorders such as cracking and secondary growth. But the reasons for such results are yet to be studied. Also, it was considered that the Bar 3 clone have a potential of reducing not only common scab occurrence but also soil erosion during potato cultivation in field. The nutritional contents (mineral compound, vitamin C and amino acid) and response to Spodoptera exigua of the transgenic potato clones were not significantly different.

• Journal of Life Science
• /
• v.27 no.11
• /
• pp.1276-1289
• /
• 2017

This study isolated and purified the antimicrobial peptide McSSP-31 from an acidified hemocyte extract of a Mytilus coruscus. The antimicrobial peptide was purified by using a $C_{18}$ reversed-phase high-performance liquid chromatography (HPLC). The peptide was determined to be 3330.549 Da by matrix assisted-laser desorption ionization time-of-flight mass spectrophotometer (MALDI-TOF/MS). The N-terminus of a 14 amino-acid sequence was identified as P-S-P-T-R-R-S-T-S-R-S-K-S-R by Edman degradation method. The acquired sequence showed a 93% similarity with the sperm-specific protein Phi-1, which is from M. californianus. The identified open-reading frame (ORF) of peptide was 306 bp encoding 101 amino acids, which was analyzed by rapid amplification of cDNA ends (RACE), cloning and sequencing analysis. We compared the full sequence with other known proteins that reveal the sperm-specific protein Phi-1 (93.5%) of M. californianus. Synthesized antimicrobial peptide (McSSP-31) showed antibacterial activity against gram-positive bacteria including B. subtilis, S. mutans, S. aureus and gram-negative bacteria including E. coli, K. pneumoniae, P. mirabilis, P. aeruginosa and fungi, C. albicans. Also, synthesized peptide showed strong antibacterial activity against antibiotic-resistant strains, including S. aureus. The cytotoxicity of the peptide was determined by using the HUVEC human cell line. The peptide did not exhibit any significant cytotoxic effects on the normal human cell line, and it had very low hemolytic activity with flounder hemoglobin. The results demonstrated that peptide purified from the hemocyte of a M. coruscus exhibits antibacterial activity against various bacteria and has the potential to be an alternative antibiotic agent.

• Tuberculosis and Respiratory Diseases
• /
• v.54 no.1
• /
• pp.45-56
• /
• 2003

Background : Mycobacterium abscessus is the most common respiratory pathogen in rapidly growing mycobacteria and is resistant to all of the first-line antituberculosis drugs. This report describes the clinical and radiographic characteristics in patients with pulmonary disease caused by M. abscessus. Materials and Methods : Twelve patients with pulmonary disease caused by M. abscessus who fulfilled the 1997 American Thoracic Society diagnostic criteria for a nontuberculous mycobacterial pulmonary infection were observed over a five-and-a-half year period. The clinical characteristics and chest radiographic findings were analyzed, retrospectively. Results : The patients were predominantly female(11/12, 92%) and nonsmokers(12/12, 100%). Coughing (10/12, 83%), sputum(10/12, 83%) and hemoptysis(10/12, 83%) were the common symptoms and they had prolonged periods from the onset of symptoms to the diagnosis of their disease(median 6.5 years). Eleven (92%) patients had a previous history of being treated for pulmonary tuberculosis. The sputum specimens were acid-fast bacilli smear-positive in all patients. All patients were administered antituberculosis drugs. Six (50%) patients were treated with second-line antituberculosis drugs on account of persistent smear-positive sputum specimens. The chest radiographs showed that reticulonodular opacities(11/12, 92%) were the most common pattern of abnormality, followed by cavitary lesions(5/12, 42%). The computed tomography findings suggested bronchiolitis from the centrilobular nodules with a tree-in-bud appearances(9/10, 90%) and bronchiectasis (9/10, 90%) were the most common, followed by well-defined nodules smaller than 10-mm in diameter(7/10, 70%). Conclusions : M. abscessus pulmonary disease should be recognized as a cause of chronic mycobacterial lung disease, and respiratory isolates should be assessed carefully.

• Journal of Life Science
• /
• v.30 no.11
• /
• pp.983-989
• /
• 2020

The balance between bone-resorbing osteoclasts and bone-forming osteoblasts is key to bone health. An imbalance between osteoclasts and osteoblasts leads to various bone-related disorders, such as osteoporosis, osteomalacia, and osteopetrosis. However, the bone-resorption inhibitor drugs that are currently used may cause side effects. Natural substances have recently received much attention as therapeutic drugs for the treatment of bone health. This study was designed to determine the effect of Tenebrio molitor larvae ethanol extract (TME) on receptor activator of nuclear factor-κB ligand (RANKL)-induced osteoclast differentiation. To measure the effect of TME on osteoclast differentiation, RAW264.7 cells were treated with RANKL with or without TME for 5 days. The tartrate-resistant acid phosphatase (TRAP) activity was significantly inhibited by treatment of TME without cytotoxicity up to 2 mg/ml. In addition, TME effectively suppressed expression of osteoclast differentiation-related marker genes and proteins such as TRAP, NFATc1, and c-Src. TME also significantly inhibited the p38 mitogen-activated protein kinase (MAPK) signaling pathway without affecting ERK and JNK signaling in RANKL-induced RAW264.7 cells. Consequently, we conclude that TME suppresses osteoclast differentiation by inhibiting RANKL-induced osteoclastogenic genes expression through the p38 MAPK signaling pathways. These results suggest that TME and its bioactive components are potential therapeutics for bone-related diseases such as osteoporosis.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.26 no.1
• /
• pp.52-72
• /
• 1984

This study was performed to obtain the basic data which can be applied to the use of epoxy resin mortars. The data was based on the properties of epoxy resin mortars depending upon various mixing ratios to compare those of cement mortar. The resin which was used at this experiment was Epi-Bis type epoxy resin which is extensively being used as concrete structures. In the case of epoxy resin mortar, mixing ratios of resin to fine aggregate were 1: 2, 1: 4, 1: 6, 1: 8, 1:10, 1 :12 and 1:14, but the ratio of cement to fine aggregate in cement mortar was 1 : 2.5. The results obtained are summarized as follows; 1.When the mixing ratio was 1: 6, the highest density was 2.01 g/cm$^3$, being lower than 2.13 g/cm$^3$ of that of cement mortar. 2.According to the water absorption and water permeability test, the watertightness was shown very high at the mixing ratios of 1: 2, 1: 4 and 1: 6. But then the mixing ratio was less than 1 : 6, the watertightness considerably decreased. By this result, it was regarded that optimum mixing ratio of epoxy resin mortar for watertight structures should be richer mixing ratio than 1: 6. 3.The hardening shrinkage was large as the mixing ratio became leaner, but the values were remarkably small as compared with cement mortar. And the influence of dryness and moisture was exerted little at richer mixing ratio than 1: 6, but its effect was obvious at the lean mixing ratio, 1: 8, 1:10,1:12 and 1:14. It was confirmed that the optimum mixing ratio for concrete structures which would be influenced by the repeated dryness and moisture should be rich mixing ratio higher than 1: 6. 4.The compressive, bending and splitting tensile strenghs were observed very high, even the value at the mixing ratio of 1:14 was higher than that of cement mortar. It showed that epoxy resin mortar especially was to have high strength in bending and splitting tensile strength. Also, the initial strength within 24 hours gave rise to high value. Thus it was clear that epoxy resin was rapid hardening material. The multiple regression equations of strength were computed depending on a function of mixing ratios and curing times. 5.The elastic moduli derived from the compressive stress-strain curve were slightly smaller than the value of cement mortar, and the toughness of epoxy resin mortar was larger than that of cement mortar. 6.The impact resistance was strong compared with cement mortar at all mixing ratios. Especially, bending impact strength by the square pillar specimens was higher than the impact resistance of flat specimens or cylinderic specimens. 7.The Brinell hardness was relatively larger than that of cement mortar, but it gradually decreased with the decline of mixing ratio, and Brinell hardness at mixing ratio of 1 :14 was much the same as cement mortar. 8.The abrasion rate of epoxy resin mortar at all mixing ratio, when Losangeles abation testing machine revolved 500 times, was very low. Even mixing ratio of 1 :14 was no more than 31.41%, which was less than critical abrasion rate 40% of coarse aggregate for cement concrete. Consequently, the abrasion rate of epoxy resin mortar was superior to cement mortar, and the relation between abrasion rate and Brinell hardness was highly significant as exponential curve. 9.The highest bond strength of epoxy resin mortar was 12.9 kg/cm$^2$ at the mixing ratio of 1:2. The failure of bonded flat steel specimens occurred on the part of epoxy resin mortar at the mixing ratio of 1: 2 and 1: 4, and that of bonded cement concrete specimens was fond on the part of combained concrete at the mixing ratio of 1 : 2 ,1: 4 and 1: 6. It was confirmed that the optimum mixing ratio for bonding of steel plate, and of cement concrete should be rich mixing ratio above 1 : 4 and 1 : 6 respectively. 10.The variations of color tone by heating began to take place at about 60˚C, and the ultimate change occurred at 120˚C. The compressive, bending and splitting tensile strengths increased with rising temperature up to 80˚ C, but these rapidly decreased when temperature was above 800 C. Accordingly, it was evident that the resistance temperature of epoxy resin mortar was about 80˚C which was generally considered lower than that of the other concrete materials. But it is likely that there is no problem in epoxy resin mortar when used for unnecessary materials of high temperature resistance. The multiple regression equations of strength were computed depending on a function of mixing ratios and heating temperatures. 11.The susceptibility to chemical attack of cement mortar was easily affected by inorganic and organic acid. and that of epoxy resin mortar with mixing ratio of 1: 4 was of great resistance. On the other hand, when mixing ratio was lower than 1 : 8 epoxy resin mortar had very poor resistance, especially being poor resistant to organicacid. Therefore, for the structures requiring chemical resistance optimum mixing of epoxy resin mortar should be rich mixing ratio higher than 1: 4.

• The korean journal of orthodontics
• /
• v.27 no.4 s.63
• /
• pp.559-568
• /
• 1997

For orthodontic tooth movement, optimal orthodontic force should be maintained without periodontal breakdown and alveolar bone should be remodeled physiologically Therefore, To obtain proper occlusion through tooth movement within alveolar bone, we should know the biomechanics of teeth and supporting 4issues. The present study was performed to observe histologic changes of periodontal tissue immediately after application of orthodontic force and during the retention period in growing young adult dogs. In this study, experimental group contained between mandibular left canine and 1st molar and control group contained contralateral teeth of same animal. The .018'x.022' stainless steel closed coil spring(Dentaurum Co.) was ligated on the experimental teeth at initial 200gm-force from mandibular canine to 1st molar The animals(4 to 6 months aged young adult dogs) were sacrificed on 0, 14, 28 days after the finish of appliance activation, and then tissue samples were divided into hematoxylin-eosin(HE) staining section, ground section, alkaline phosphatase(ALP) staining section, and tartrate-resistant acid phosphatase(TRAP) staining section. Thereafter, the preparations were examined under light microscopy The following results were obtained: 1. Immediately after the finish of appliance activation, the periodontal space was increased in tension side, but decreased in pressure side compared to that of control. The hyalinized zone was also observed in the periodontium. 2. After the 14-day retention, peridontal space was decreased in tension side and slightly increased in pressure side compared to that of immediately after the finish of appliance activation. The hyalinized zone was repaired and a few osteoblasts showing slightly new bone formation were seen. Osteoblasts were scarcely observed along the alveolar bone. 3. Aftter the 28-day retention, the periodontal fibers are normally repaired. A lot of TRAP(+) osteoclasts md increased alveolar bone resorption were observed in pressure side, and AP(+) osteoblast and increased new bone formation were observed in tension side.

• Tuberculosis and Respiratory Diseases
• /
• v.49 no.2
• /
• pp.169-178
• /
• 2000

Background : Usually fever subsides within one week in over 90% of pulmonary tuberculosis (TBp) patients after the start of short-course anti-tuberculosis therapy, but occasionally it persists over two weeks after treatment. When the fever persists, drug resistance, combined infection, or drug fever, and so on, are considered as an etiology and, in some cases, drugs are changed. But inadvertent discontinuation of a short-course regimen inevitably will extend the duration of treatment, and the treatment completion may be delayed. This study was performed to investigate the causes of prolonged fever (PF) and to identify the predictors of PF in drug-susceptible TBp patients in Korea. Method : Five hundred-ninety-eight patients, who were admitted to Asan Medical Center from January 1996 to March 1999, diagnosed with TBp and prescribed short-course, anti-tuberculosis treatment, were reviewed. PF was defined as having fever over two weeks despite treatment. The causes of PF were analyzed. Drug-sus-ceptible TBp patients who presented no causes for PF, except turberculosis itself, were selected(n=22), and they were compared with those who had no fever at diagnosis (n=22) and those who had fever at diagnosis, which had subsided within two weeks after treatment (n=22). Clinical, laboratory, and radiological parameters were compared among the three groups. Results : Twenty-eight (4.8%) of 598 patients showed PF over two weeks despite short-course treatment. The causes of PF were drug fever (n=2), multi-drug resistant tuberculosis (n=3), disseminated Mycobacterium kansasii infection (n=1), and drug-susceptible tuberculosis itself (n=22). The patients with PF had more risk factors for tuberculosis, long duration of symptoms before treatment, night sweats, weight long, numerous acid fast bacilli on sputum smear, anemia, hyponatremia, hypoalbuminemia, over three lung cavity numbers and extensive infiltration, indicating that they had prolonged and extensive lung diseases. Conclusion : The main cause of PF in TBp despite short-course regimen seems to be drug-susceptible but extensive disease in Korea. Any changes to the drug regiment provided for TBp patients with prolonged fever despite treatment should be carefully considered.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.4
• /
• pp.525-530
• /
• 2011

Pine needles have long been used as a traditional health-promoting medicinal food in Korea. This study was carried out to investigate the effects of pine needle extracts on the antioxidant activity, and proliferation of osteoclastic RAW 264.7 cells. Pine needle extracts were examined using hot water, ethanol, hexane, hot water-ethanol, and hot water-hexane. The effects of the pine needle extracts were examined by comparing the results with that of a commercial agents, proanthocyanidin. Analysis of each extract indicated that hot water-ethanol and ethanol extracts contained the highest total polyphenol concentrations. The hot water-ethanol and ethanol extracts also showed relatively the highest SOD-like activity. The proliferation of osteoclastic RAW 264.7 cells treated with pine needle extracts was decreased by lower than 70%. In addition, the hot water and ethanol extracts of pine needle significantly reduced the number of tartrate-resistant acid phosphatase-positive ($TRAP^+$) multinucleated cells from osteoclatic RAW 264.7 cells. These results indicate that pine needle extracts had an anabolic effect on bone through the promotion of osteoclast differentiation, suggesting that they could be used for the treatment of common metabolic bone diseases.

• Korean Chemical Engineering Research
• /
• v.50 no.2
• /
• pp.229-237
• /
• 2012

Phosphorus was incorporated into Co/$Al_2O_3$ catalyst for FTS by impregnating an acidic precursor, phosphoric acid, in ${\gamma}-Al_2O_3$ support to improve the mechanical strength, the hydrothermal stability of the catalyst particle, and the catalytic performance as well. Surface characterization techniques such as FT-IR revealed that $AlPO_4$ phase was generated on the surface of the P-modified catalyst. The addition of phosphorus was found to alleviate the interaction between cobalt and alumina surface, and to increase reducibility of catalyst. The catalytic activity such as $C_{5+}$ productivity and turnover frequency (TOF) was calculated to evaluate catalytic performance. The influence of calcination temperature of the $Al_2O_3$ containing 2 wt.% P on the catalytic performance was also investigated. Through hydrothermal stability test and XRD analysis, the P-modified catalyst had strong resistant to the pressurized and hot $H_2O$. The mechanical strength of the P-modified catalyst was also examined through an in-house fluidized-bed vessel, and it was found that the catalyst fragmentation could be successfully suppressed with P. Taken as a whole, the best performance was shown to be at 1~2 wt.% P in alumina and at the calcination temperature of $500^{\circ}C$.