• Bulletin of the Korean Chemical Society
• /
• 제5권1호
• /
• pp.21-23
• /
• 1984

The addition reactions of thioglycolic acid to ${\omega}$, ${\omega}$-diacetylstyrene derivatives were investigated. ${\omega}$, ${\omega}$-Diacetylstyrene derivatives easily undergo addition reactions with thioglycolic acid to form s-(2, 2-diacetyl-1-phenylethyl)-thiogycolic acid, s-[2,2-diacetyl-1-(methyl) phenylethyl]-thioglycolic acid, s-[2,2-diacetyl-1-(p-methoxy) phenylethyl]-thioglycolic acid and s-[2,2-diacetyl-1-(p-chloro) phenylethyl]-thioglycolic acid, respectively. The structures of these compounds were identified by neutralization equivalent, UV, IR, and NMR spectral data.

• 한국응용과학기술학회지
• /
• 제28권1호
• /
• pp.35-47
• /
• 2011

For the synthesis of water soluble acrylic modified epoxyester resin, fatty acid/epoxy ratio of 50/50 was used, and introduced maleic anhydride. Ratio of styrene/acrylic acid of acrylic monomers was fixed 85/15 and ratio of epoxyester/acrylic monomer was controlled 80/20, 75/25, 70/30, 65/35, and degree of neutralization were changed 65%, 80%, to 100%. As a result, 40% solids acrylic modified epoxyester resins were synthesized. Resins were evaluated water soluble stability, drying time, water resistant, storage stability and physical properties. And the white paints were prepared, and were evaluated viscosity, drying time, water resistance, adhesion, sagging, spray workability, gloss, salt spray resistance, skinning, whiteness and flash rust. As a result, the degree of neutralization of 100% and the ratio of epoxyester/acrylic monomer of 75/25 showed the best properties.

• Elastomers and Composites
• /
• 제34권5호
• /
• pp.399-406
• /
• 1999

Polytetramethylene ether glycol (PTMG)와 4,4'-diphenylmethane diisocyanate (MDI), toluene 2,4-diisocyanate(TDI), isophoron diisocyanate(IPDI)로 polyurethane (PU) prepolymer를 합성하고, dimethylol propionic acid(DMPA)로 쇄연장시킨 후 triethyl amine(TEA)으로 중화시켜서 안정한 수분산성의 음이온성 폴리우레탄을 제조하였다. 음이온성 폴리우레탄의 합성과정에서 쇄연장제의 함량과 중화비에 따른 에멀젼의 유화안정성, 접착강도, 점도, 유리전이온도 및 cast film의 물리적 성질을 UTM, Viscometer와 DSC를 사용하여 검토하였다.

• 한국환경보건학회지
• /
• 제22권3호
• /
• pp.56-63
• /
• 1996

The results of the water purification studies using water parsley (Oenanthe javanica) were obtained as follows. The removal rate of nutrient salts increased with longer plant growth periods. The results of this study use the assumption, log(T+1) = $K(C_0-C)^A$, based on Prakish's Theory. The initial concentration was calculated from experimental data. A and K are closely related to the initial concentration. It is possible to model the concentration of residual salts, as time goes by, if concentration is constant. It was observed that water parsley neutralizes acid and alkali substances promptly. The maximum suitable neutralization period is 48 hours. But water parsley withered up in strong acid and alkali solutions within a week. The removal efficiency of Cd progresses in 2 steps, which are unrelated to the initial concentration of Cd. The first part of the curve shows the concentration rapid rate of Cd removal, followed by a levelling off. The removal rate of $NO_x-N$ in the sample water tank containing 0.5 ppm Cd was between 50~80% but the removal rate was less than 20% for the higher concentration. On the other hand, increased amounts of $PO_4-P$ in the sample water tank from the third day on suspected that $PO_4-P$ was desorbed from the water parsley. The accumulation efficiency of Cd in plant was increased in proportion to the initial concentration of Cd. The accumulation phenomenon was observed in the tanks more than 50~100 times.

• 멤브레인
• /
• 제6권4호
• /
• pp.250-257
• /
• 1996

글루탈알데히드와 황산을 이용하여 가교된 키토산 복합막을 제조하였다. 제조된 복합막은 글루탈알데히드와 황산용액을 이용하여 표면말을 선택적으로 가교하엿다. 제조된 키토산 막에서의 키토산과 아세트산간의 착체형성의 영향을 관찰하기 위하여 수산화나트륨으로 중화하여 성능을 비교하였다. 황산으로 표면을 가교한 경우 코팅된 활성층의 투과증발에 대한 영향을 관찰하였다. 글루탈알데히드로 가교된 키토산복합막은 지지체의 종류를 변화시키면서 투과증발성능을 비교하였다. 지지체의 순수투과성능이 증가할수록 투과유량은 비슷한 값들을 유지하였으며, 선택도는 증가하다가 다시 감소하는 경향을 나타내었다. 수산화나트륨으로 키토산을 중화시킨 경우에는 선택도는 감소하였고 투과유량은 유지되는 경향을 나타내었다. 황산을 이용하여 표면을 이온가교시킨 경우 키토산 복합막은 활성충우ㅏ 두께가 증가할수록 가교시간이 증가하여야 최적의 가교조건을 나타내었다.

• 한국방재안전학회논문집
• /
• 제17권1호
• /
• pp.27-35
• /
• 2024

본 논문은 순환골재 표면에 부착된 시멘트 페이스트 및 모르타르를 제거하는 데 있어 화학적 중화반응 및 초음파 세척의 적용 가능성을 평가하기 위한 실험적 연구 결과를 제시한다. 최적의 초음파 세척 효율 및 화학적 중화반응을 도출하기 위하여 초음파 진동수, 화학용액의 종류 등을 변수로 한 실험이 수행되었다. 그 결과 최적 진동수는 24 kHz로 나타났으며, 염산 15% 용액에 침지시킨 후 30분 가진하는 것이 최적 조건이라는 결론이 도출되었다. 또한, 품질 개선된 순환 굵은 골재의 비중, 흡수율, 마모율은 일반골재와 유사하며 KS F 2527 기준을 모두 만족하는 것으로 나타났다. 따라서, 본 연구를 통해 제안된 방법을 통해 품질 개선된 순환골재는 콘크리트용으로 사용이 가능할 것으로 판단된다.

• Journal of Ginseng Research
• /
• 제22권3호
• /
• pp.205-210
• /
• 1998

Glucosidic bonds at the C20 position of the sapogenins were hydrolyzed easily in the lower pH, higher temperatures and longer times to give prosapogenins and sugars. The glucosidic bond of saponin at the C3 of ginsenoside-Rb1, which is secondary carbon, was relatively stable due to the low electron density of -0.2. But the bond of saponin at the C20 position, which is tertiary carbon with the relatively high electron density of -0.3, was liable to be hydrolyzed even in weakly acidic solution by the increase of heating time. On the other hand, red ginseng contained 13.34 mg/g of citric acid, 8.78 mg/g of malonic acid, 3.70 mg/g of oxalic acid, 2.13 mg/g of malic acid and 0.44 mg/g of succinct acid. Ginseng saponins were very stable in ginseng extract neutralized with sodium carbonate or sodium bicarbonate corresponding to the equivalent amount of the total organic acid in the red ginseng.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 가을 학술논문 발표대회
• /
• pp.104-105
• /
• 2020

Red mud is a highly alkaline waste by-product of the aluminum industry. Although recycling of red mud is being actively researched, a feasible technological solution has not been found yet. In this study, we propose that neutralization of red mud alkalinity could assist in its use as a construction material. Neutralized red mud ( pH 6-8) was prepared by adding sulfuric acid to liquefied red mud (pH 10-12). After adding liquid and neutralized red mud to the cement paste, the heat of hydration was measured. As a result of the experiment, the calorific value of the cement paste with liquid red mud was lowered and delayed compared to the cement paste with neutralized red mud.

• Asian-Australasian Journal of Animal Sciences
• /
• 제21권10호
• /
• pp.1495-1500
• /
• 2008

In an attempt to develop a probiotic formulation for poultry feed, a number of lactic acid bacteria (LAB) were isolated from chicken intestinal specimens and a series of in vitro experiments were performed to evaluate their efficacy as a potential probiotic candidate. A total of 650 LAB strains were isolated and screened for their antagonistic potential against each other. Among all the isolates only three isolates (TMU121, 094 and 457) demonstrated a wide spectrum of inhibition and were thus selected for detailed investigations. All three selected isolates were able to inhibit the growth of E. coli and Salmonella species, although to variable extent. The nature of the inhibitory substance produced by the isolates TMU121 and 094 appeared to be associated with bacteriocin, as their activity was completely lost after treatment with proteolytic enzymes, while pH neutralization and catalase enzyme had no effect on the residual activity. In contrast, isolate TMU457 was able to resist the effect of proteolytic enzymes while pH neutralization completely destroyed its activity. Attempts were made to study the acid, bile tolerance and cell surface hydrophobicity of these isolates. TMU121 showed high bile salt tolerance (0.3%) and high cell surface hydrophobicity compared to the other two strains studied, while TMU094 appeared the most pH resistant strain. Based on these results, the three selected LAB isolates were considered as potential ingredients for a chicken probiotic feed formulation and were identified to species level based on their carbohydrate fermentation pattern by using API 50CH test kits. The three strains were identified as Lactobacillus fermentum TMU121, Lactobacillus rhamnosus TMU094, and Pediococcus pentosaceous TMU457.

• Corrosion Science and Technology
• /
• 제8권3호
• /
• pp.110-115
• /
• 2009

At the onset of corrosion of steel in concrete, hydrogen ions usually evolve in the process of electrochemical reaction, thereby decreasing the pH of the pore solution, which can be buffered by cement hydration products, as being representatively illustrated by calcium hydroxide. Hence, a fall in the pH is dependent on properties of cement hydration (i.e. hydration products and degree of hydration). The present study tested acid neutralization capacity (ANC) of cementitious binders of OPC(Ordinary Portland Cement), 30% PFA(Pulverized Fuel Ash), 60% GGBS(Ground Granulated Blast Furnace Slag), 10% SF(Silica Fume) to quantify the resistance of cement matrix to a pH fall. Cement pastes were cast at 0.4 of a free W/C ratio with 1.5% chlorides by weight of binder in cast. Powder samples obtained crushed and ground specimen after 200 days of curing were diluted in still water combined with different levels of 1M nitric acid solution, ranging from 0.5 to 20 mol/kg. Then, the pH of diluted solution was monitored until any further change in the pH did not take place. It was seen that the pH of the diluted solution gradually decreased as the molar amount of nitric acid increased. At some particular values of the pH, however, a decrease in the pH was marginal, which can be expressed in the peak resistances to a pH fall in the ANC curve. The peaks occurred at the variations in the pH, depending on binder type, but commonly at about 12.5 in the pH, indicate a resistance of precipitated calcium hydroxide. The measurement of water soluble chloride at the end of test showed that the amount of free chloride was significantly increased at the pH corresponding to the peaks in the ANC curve, which may reflect the adsorption of hydration products to chlorides.