• Korean Journal of Materials Research
• /
• v.14 no.6
• /
• pp.443-450
• /
• 2004

Parylene polymer thin film shows excellent homogeneous coverage chracteristics when it was deposited onto very complex three dimensional solid matters, such as deep hole and micro crack. The parylene deposition process can be conducted at room temperature although most of chemical vapor deposition processes request relatively high processing temperature. Therefore, the parylene coating process does not induce any thermal problems. Parylene thin film is transparent and has extremly high chemical stability. For example, it shows high chemical stability with high reactive chemical solutions such as strong acid, strong alkali and acetone. The bio-stability of this material gives good chances to use for a packaging of biomedical devices and electronic devices such as display. In this review article, principle of deposition process, properties and application fields of parylene polymer thin film are introduced.

• Korean Journal of Materials Research
• /
• v.24 no.6
• /
• pp.285-292
• /
• 2014

Commercial activated-carbon used as the electrode material of an electric double-layer capacitor (EDLC) was posttreated with various acids and alkalis to increase its capacitance. The carbon samples prepared were then heat-treated in order to control the amount of acidic functional groups formed by the acid treatments. Coin-type EDLC cells with two symmetric carbon electrodes were assembled using the prepared carbon materials and an organic electrolyte. The electrochemical performance of the EDLC was measured by galvanostatic charge-discharge, cyclic voltammetry, and electrochemical impedance spectroscopy. Among the various activated carbons, the carbon electrodes (CSsb800) prepared by the treatments of coconutshell-based carbon activated with NaOH and $H_3BO_5$, and then heat treated at $800^{\circ}C$ under a flow of nitrogen gas, showed relatively good electrochemical performance. Although the specific-surface-area of the carbon-electrode material ($1,096m^2/g$) was less than that of pristine activated-carbon ($1,122m^2/g$), the meso-pore volume increased after the combined chemical and heat treatments. The specific capacitance of the EDLC increased from 59.6 to 74.8 F/g (26%) after those post treatments. The equivalent series resistance of EDLC using CSsb800 as electrode was much lower than that of EDLC using pristine activated carbon. Therefore, CSsb800 exhibited superior electrochemical performance at high scan rates due to its low internal resistance.

• Journal of Chest Surgery
• /
• v.26 no.8
• /
• pp.627-632
• /
• 1993

A clinical study was performed on 64 cases of the esophageal diseases experienced at the Department of Thoracic & Cardiovascular Surgery of Kyungpook University Hospital from Jan. 1988 through Dec. 1992. The results were as follows: The most common esophageal disease was cancer which occurred in 37.5% of the total. In esophageal cancer patients, 24 cases were operated on and cancer resection was feasible in 19 cases with 2 cases of hospital death. The overall 1 year survival rate was 41.6% and the most favorable follow up result was revealed in stage I group. Esophageal stricture occurred in 22 cases and its causes were alkali and acid. The most common stricture site was mid-esphagus. Colon interposition was performed on 15 cases. Achalasia occured in 8 cases and was treated with modified Heller`s myotomy. Esophageal perforation occurred in 6 cases and its operative mortality rate was 16.6%. Two patients with congenital bronchoesophageal fistula were treated with surgical division. The first case, which occurred in an adult, is of Braimbridge,s typeII classification. The second one which occured in an child with sequestration, is of Braimbridge,s type IV classification. Diverticulectomy was performed in 1 case of esophageal diverticulum. Enucleation of tumor was performed in 1 case of esophageal leiomyoma.

• Microbiology and Biotechnology Letters
• /
• v.19 no.2
• /
• pp.163-170
• /
• 1991

Production of cyclodextrin (CD) directly from raw corn starch without liquefaction using cyclodextrin glucanotransferase (CGTase) was carried out in an agitated bead reaction system. Similar CD yield and production rate comparable with those of conventional method using liquefied starch were obtained. Especially high purity-CD in the reaction mixture without accumulation of malto-oligosaccharides was obtained. The maximum 54g/l of CD was obtained at raw starch concentration of 200g/l. CD yield was inversely proportional to raw starch concentration, and conversion yield was 0.48 at substrate concentration of 100g/l. The optimal amount of enzyme (CGTase unit/g raw starch) was found to be around 6.0. Granular structure of raw starch degraded by CGTase was observed by SEM in order to investigate the enhancing mechanism, along with those of acid or alkali pretreated raw starch, amylose, and amylopectin. Kinetic constants of CGTase on raw starch in an agitated bead reaction system were evaluated, and CGTase was competitively inhibited by CD.

• Journal of Korean Society of Water and Wastewater
• /
• v.24 no.6
• /
• pp.703-712
• /
• 2010

This study performed to extract operation factors of major organic wastes, which were food wastes and waste activated sludge generated in industries in order to use them as a substrate for bio-H2 production. According to the results of experimental analysis for hydrogen production capacity by various organic concentrations, the hydrogen production yield was the highest at 80 g/L, and the efficiency was improved by the pretreatment of waste activated sludge (acid treatment, alkali treatment). Hydrogen production efficiency was improved by mixing food wastes and waste activated sludge if waste activated sludge was below than 30%, however, it was decreased when it was more than 50%. The impacts of heavy metals on the hydrogen production shows that the inhibition level depends on the concentration of Cr, Zn, and Cu, Fe was able to enhance the hydrogen production.

• Korean Journal of Metals and Materials
• /
• v.46 no.12
• /
• pp.835-840
• /
• 2008

Texturing for crystalline silicon solar cells is one of the important techniques to increase conversion efficiency by effective photon trapping. Generally, incoming wafers or alkali etched wafers are used for texturing. From this conventional etching process, $7{\sim}10{\mu}m$-sized random pyramids are formed. In this study, acid etching for removal of saw damages was practiced before texturing. This improved the resulting surface morphology, which consisted of $2{\sim}4{\mu}m$-sized pyramids. Because these pyramids covered the surface much more extensively, we obtained reduction of optical losses on the surface. In order to compare with conventional texturing, FE-SEM is used for observing surface morphology and reflectance data is analyzed by UV-VIS spectrophotometer.

• Korean Journal of Metals and Materials
• /
• v.47 no.12
• /
• pp.881-886
• /
• 2009

Research into the replacement of injured systems and tissue in the human body is advancing rapidly. Recently, Ti-Ni shape memory alloys have shown excellent biofunctionality related to their shape memory effect and superelasticity. In this study, the effect of an acid or an alkali treatment on the bioactivity in 49Ti-Ni and 51.5Ti-48.5Ni alloys is investigated in an effort to utilize Ti-Ni alloy as a biomaterial. In addition, the biocompatibility in a SBF solution is assessed through in vitro testing. A porous surface was formed on the surface of both alloys after a chemical treatment. According to the in vitro test, apatite formed on the surfaces of both alloys. The forming rate of apatite in the Ti-rich alloy was faster that in the Ni-rich alloy. The formation of apatite provided proof of the bioactivity of the Ti-Ni alloy. A small quantity of Ni was eluted at the initial stage, whereas Ni was not found for 12 days in the Ti-rich alloy and for 8 days in the Ni-rich alloy. In the case of the treated 51.5Ti-Ni alloy, the shape memory property was worsened but the biocompatibility was improved.

• Microbiology and Biotechnology Letters
• /
• v.32 no.4
• /
• pp.307-311
• /
• 2004

Hot water soluble extract from sporophyll of Undaria pinnatifida was examined for antioxidant activity using l,l-diphenyl-picrylhydrazyl (DPPH) and lipid peroxidation assay. The $IC_{50}$ value (7.6 mg/ml) of hot water extract from sporophyll of U. pinnatifida was more higher than ascorbic acid (0.025 mg/ml) and BHT (0.25 mg/ml). The hot water extract from sporoof U. pinnatifida was stable from pH 2 to pH 7 but decreased at alkali pH. The heat stability of hot water extract from sporophyll of U. pinnatifida was stable from $0^{\circ}C$ to $120^{\circ}C$. An effect on an antioxidant activity of hot water extract from sporophyll of U. pinnatifida was studied with various metal ions and EDTA. Antioxiactvity of hot water extract from sporophyll of U. pinnatifida was inhibited by EDTA but increased by adding $Cu^{2+}$, $Co^{2+}$ and $Mn^{2+}$, respectively.

• Korean Journal of Materials Research
• /
• v.15 no.3
• /
• pp.172-176
• /
• 2005

Formation of aluminum hydroxide by a hydrolytic reaction of nano aluminum powder synthesized by a pulsed wire evaporation (PWE) method has been studied. The type and morphology of the hydroxides were investigated with various initial temperatures and pHs. The nano fibrous boehmite (AlOOH) was formed predominantly over $40^{\circ}C$ of the hydrolytic temperature in acid solution, while the bayerite $(Al(OH)_3)$ was formed predominantly below $30^{\circ}C$ in alkali solution with a faceted crystalline structure. As a result the boehmite showed a much larger specific surface area (SSA) than that of bayerite. The highest SSA of the boehmite was about $409\;m^2/g$.

• Applied Chemistry for Engineering
• /
• v.7 no.1
• /
• pp.171-176
• /
• 1996

The easily biodegradable nonionic surfactant of glucamide(N-alkyl-N-acyl glucamine) was synthesized by the two-step reaction. The first step was the amination between alkylamine and glucose in methanol. Then, alkyl glucamines were obtained by reduction using Ni catalyst under the high pressure with 86~93% of reaction yield. The second step was the synthesis of glucamide from alkyl glucamine and fatty acid methyl ester in methanol under the alkali catalytic condition while refluxing the solvent. The reaction yield of this step was 84~95% except the benzyl glucamine, which the reaction yield was 50~70%. The molecular structure of four kinds of alkyl glucamine and 16 kinds of glucamide with different alkyl and acyl groups was studied by IR, MS and NMR.