• Bulletin of the Korean Chemical Society
• /
• v.33 no.2
• /
• pp.519-523
• /
• 2012

A kinetic study is reported on nucleophilic displacement reactions of benzyl 2-pyridyl carbonate 6 with alkalimetal ethoxides, EtOM (M = Li, Na, and K), in anhydrous ethanol at $25.0{\pm}0.1^{\circ}C$. The plots of pseudo-firstorder rate constant $k_{obsd}$ vs. [EtOM] curve upward, a typical phenomenon reported previously for alkaline ethanolysis of esters in which alkali-metal ions behave as a Lewis-acid catalyst. The kobsd value for the reaction of 6 with a fixed EtOK concentration decreases rapidly upon addition of 18-crown-6-ether (18C6), a complexing agent for $K^+$ ion up to [18C6]/[EtOK] = 1.0 and then remains constant thereafter, indicating that the catalytic effect exerted by K+ ion disappears in the presence of excess 18C6. The reactivity of EtOM towards 6 increases in the order $EtO^-$ < EtOLi < EtONa < EtOK, which is contrasting to the reactivity order reported for the corresponding reactions of 2-pyridyl benzoate 4, i.e., $EtO^-$ < EtOK < EtONa < EtOLi. Besides, 6 is 1.7 and 3.5 times more reactive than 4 towards dissociated $EtO^-$ and ion-paired EtOK, respectively. The reactivity difference and the contrasting metal-ion selectivity are discussed in terms of electronic effects and transition-state structures.

• Carbon letters
• /
• v.17 no.1
• /
• pp.1-10
• /
• 2016

Lignocellulosic biomass conversion to biofuels such as ethanol and other value-added bio-products including activated carbons has attracted much attention. The development of an efficient, cost-effective, and eco-friendly pretreatment process is a major challenge in lignocellulosic biomass to biofuel conversion. Although several modern pretreatment technologies have been introduced, few promising technologies have been reported. Microwave irradiation or microwave-assisted methods (physical and chemical) for pretreatment (disintegration) of biomass have been gaining popularity over the last few years owing to their high heating efficiency, lower energy requirements, and easy operation. Acid and alkali pretreatments assisted by microwave heating meanwhile have been widely used for different types of lignocellulosic biomass conversion. Additional advantages of microwave-based pretreatments include faster treatment time, selective processing, instantaneous control, and acceleration of the reaction rate. The present review provides insights into the current research and advantages of using microwave-assisted pretreatment technologies for the conversion of lignocellulosic biomass to fermentable sugars in the process of cellulosic ethanol production.

• 한국생물공학회:학술대회논문집
• /
• 2005.04a
• /
• pp.99-102
• /
• 2005

The Basidomycetes fungus Agaricus blazei Murill has been well known as a health food for the prevention of cancer, diabetes, hyperlipidemia, arteriosclerosis and chronic hepatitis. This study was concentrated to investigate the characteristics of crude protein-bound polysaccharides(PBP) compositions extracted from Agaricus blazei Murill. In order to produce crude polysaccharides, culture conditions were examined using YMK media. Total sugars and protein contents of PBP were detected by phenol-sulfuric acid method and Bradford -assay. Hexosamine was found to be involved in the linkage, N-linked and O-linked types. To identify helical conformation existence, wavelength was measured using Congo red after the treatment with alkali solution.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.7 no.6
• /
• pp.331-334
• /
• 2002

Culture conductivity and on-line NADH fluorescence were used to measure cellular growth in plant cell suspension cultures of Podophyllum hexandrum. An inverse correlation between dry cell weight and medium conductivity was observed during shake flask cultivation. A linear relationship between dry cell weight and culture NADH fluorescence was obtained during the exponential phase of batch cultivation In a bioreactor under the pH stat (pH 6) conditions. It was observed that conductivity measurement were suitable for biomass characterisation under highly dynamic uncontrolled shake flask cultivation conditions. However, if the acid/alkali feeding is done for pH control the conductivity measurement could not be applied. On the other hand the NADH fluorescence measurement allowed online-in situ biomass monitoring of rather heterogenous plant cell suspension cultures in bioreactor even under the most desirable pH stat conditions.

• International Journal of Concrete Structures and Materials
• /
• v.3 no.2
• /
• pp.97-101
• /
• 2009

It has been known that acid-resistant concretes on the liquid glass basis have high porosity (up to 18${\sim}$20%), low strength and insufficient water resistance. Therefore they can not be used as materials for load-bearing structural elements. Significant increasing of silicate matrix strength and density was carried out by incorporation of special liquid organic alkali-soluble silicate additives, which block of superficial pores and reduces concrete shrinkage deformation. It was demonstrated that introduction of tetrafurfuryloxisilane additive sharply increases strength, durability and shock resistance of silicate polymer concrete in aggressive media. This effect is attributable to hardening of contacts between silicate binder gel globes and modification of alkaline component owing to "inoculation" of the furan radical. The optimal concrete composition with the increased strength, chemical resistance in the aggressive environments, density and crack resistance was obtained.

• Journal of the Korean Wood Science and Technology
• /
• v.17 no.1
• /
• pp.12-21
• /
• 1989

This experiment was executed to investigate the characteristics of gloss and color difference in coated films by N.C. Lacquer, Aminoalkyd, Polyester. and Polyurethan coating after chemical (distilled water, ethyl alcohol. acetic acid, and sodium hydroxide) and heating ($120^{\circ}C$) treatments, cold-check test, and U.V. radiation. The results obtained were summarized as follows 1. The gloss decreasing rate by water resistance test was the least among chemicals treated on coated films. 2. The color difference of coated films chemical treatments highly and similarly increased, except the alkali treatment showing a little increase. 3. In the color difference by U.V. radiation, the polyester coated film showed generally large difference compared with the other coated films.

• Journal of Biomedical Engineering Research
• /
• v.11 no.2
• /
• pp.295-304
• /
• 1990

In order to use for artificial dental tooth (dental crowens) , new glass-ceramics material has been studied. Its basic composition and the condition of heat treatment for crystalization, mechanical and chemical properties were investigated. Adding of the LAS system composition in the basic glass, time and temperature for crystalization were shortened. Fracture toughness (kic)of samples heat treated at 90$0^{\circ}C$ for 2 hours is 2.5-2.6MN/m3/2, the optimum condition of heat treatment for artificial tooth is A and B samples heating to 75$0^{\circ}C$ for 2 hours, raising to 90$0^{\circ}C$ and maintaining at 90$0^{\circ}C$ for 2 hours and C sample heating to 75$0^{\circ}C$ maintaining at 75$0^{\circ}C$ for 2 hours. In acid and'alkali solution, chemical durability is excellent.

• Journal of Chest Surgery
• /
• v.25 no.2
• /
• pp.183-187
• /
• 1992

Reconstructive surgery for corrosive esophageal stricture was performed in 392 patients at National Medical Center from 1959 to 1990 Between Jan. 1971 and Dec. 1990, 23 cases were experienced stenotic anastoma of neck after reconstructive surgery for corrosive esophageal stricture. The major procedure of esophageal reconstruction was colon interposition without resection of the strictured esophagus except jejunal interposition in 1 case. There were 12 males % 11 females, and mean age was forty years. The caustic materials were 16[70%] alkali and 7[30%] acid. Half of the cases had hypopharyngeal injury. After reconstructed surgery, dysphagia was developed immediate in 65%, from 2 months to 5 months in 31%, and from years in 4%[1 case]. The complications were anastomatic leakage in 13 cases, anastomatic stenosis in 8 cases, graft gangrene in 1 case, and cancer development in 1 case. The therapeutic procedures were end-to-end anstomolis & partial resection of stenotic anastoma in 18 cases, bourgination in 2 cases, and coin interposition with graft removal in 3 cases. The therapeutic results were excellent in 16 cases, mild discomfort in 3 cases, poor in 3 cases, and death in 1 cases.

• Proceedings of the Korean Fiber Society Conference
• /
• 1996.10a
• /
• pp.53-58
• /
• 1996

The Chitin Thiocarbonate-Fe(II)-H2O2 redox initiator system was investigated for the graft copolymerization of acrylonitrile(AN) and acrylic acid(AA) monomers onto chitin powder. The reactions with vinyl monomers onto chitin were carried out under various the graft copolymerization conditions to elucidate the polymerization behavior in terms of graft yield. Reactions of chitin-acrylonitrile graft copolymer with hydroxyl amine hydrochloride and those with sodium hydroxide were conducted in order to obtain chitin-(amidoxime-co-acrylonitrile) and chitin-(acrylate-co-acrylamide) graft copolymers, respectively. The reaction efficiency was observed to depend on the alkali concentration, time, temperature, and the reactant concentrations. The prepared chitin derivatives were evaluated to find potential applications for use in wastewater treatments for adsorption and desorption of heavy metal ions as well as acidic and basic dyes.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.27 no.5
• /
• pp.993-999
• /
• 1998

Methanol extract of roots of Amblytropis pauciflora Kitagawa showed the antimicrobial activity to three test strains. Antimicrobial spectra of various extracts of Amblytropis pauciflora Kitagawa were tested against 24 strains of bacteria and fungi. The crude methanol extract inhibited the growth of 12 strains of bacteria and Asp. fumigatus with the exception of yeasts. The properties of the antimicrobial substance were very stable under heat(at 12$0^{\circ}C$), acid(pH 3.0) and alkali(pH 11.0) treatment. Only the root harvested in spring showed the antimicrobial activity. Among the components extracted by butanol, ginseng saponin Rg1 and various saponin-like materials were detected by TLC analysis using a plate of silica gel 60F254. The antimicrobial compound was purified by methanol extraction, activated charcoal column chromatography, Sep-pak(C18) pretreatment and reverse phase HPLC. The purified compound was detected at 13.520 min as a single peak(about 98% purity) through the HPLC analysis.