• Applied Biological Chemistry
• /
• v.15 no.3
• /
• pp.213-219
• /
• 1972

In order to utilize sweet potatoes for the material of Takju, brewing experiments with raw sweet potatoes, sweet potato chips powder and its koji were conducted; and various tests were carried out on effect of the treatments of acid, alkali, polyphenol oxidase inhibitor, oxidizing and reducing agents upon the prevention against coloring of sweet potato chips by steaming, and on peeling effect of sweet potatoes by the alkali and heat treatments. The results obtained were as follows. 1) In the case of brewing with raw sweet potatose, each plot showed low acid and ethanol content, and its finished Takju had an undersirable color and odor. The plots which were mashed after peeling showed higher ethanol contents than the plots mashed without peeling. 2) In the case of brewing with sweet potato chips powder, each plot contained considerably more amount of ethanol than the plots brewed with raw sweet potatoes, white it contained less amount of acid. The ethanol contents of the plots using wheat bran koji were $10.5{\sim}11.4$ per cent 4 days after mashing, and were higher than those of the plots using malts powder. Their finished Takju was inferior in quality because of the lack of acid and being darkened gradually in process of time. 3) The kojies which were made of sweet potato chips powder with Neurospora sitophila or Aspergillus oryzae had good appearance, but the Takju mashes brewed with these contained remarkably less amount of ethanol. 4) Effect of the treatments of acid, alkali, polyphenol oxidase inhibitor and organic solvents such as ether and ethanol upon the prevention against coloring of sweet potato chips was not recognized. Alum and burnt alum were effective a little on the decolorization, and among the oxidizing and reducing agents tested, potassium permanganate was most effective. 5) Darkening of sweet potato chips powder in course of heating after mixing with water was not affected by pectin and amino acids, but by tannin. 6) Sweet potatoes were not peeled easily by friction after soaking in the boiling solution of 3 per cent alkali for 6 minutes and peeled in boiling water for 12 minutes. From the viewpoint of the results above mentioned, it seems to be necessary to study further on the isolation of microorganisms which are able to decompose the coloring substances and yeasts which are adequate for the fermentation of sweet potatoes in order to utilize sweet potatoes for Takju brewing, because brewing with raw sweet potatoes, sweet potato chips powder and its koji was unsuccessful, and effect of the various treatments on the decolorization of sweet potatoes was not recognized.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.4
• /
• pp.325-332
• /
• 2010

This study was conducted with the experiment of solubilisation of excess sludge by microbubble ozone process. To improve ozone contact efficiency, microbubble ozones which its diameter were the avearge 30 ${\mu}m$, microbubble size less than 40 ${\mu}m$ occupied about over 90% of all. In treating sludge using microbubble ozones, in case microbubble ozones are injected at microbubble ozone dosage of 0.34 g $O_3/g$ SS or less regardless of sludge concentration, microbubble ozone consumption rate was found to be 100% with no emission of waste ozones. In treating sludges by each concentration, in case the initial SS concentration of sludge is set to 6,447 mg/L, 5,557 mg/L, 3,180 mg/L, 1,092 mg/L and 515 mg/L, the amount of removed SS tended to increase with increase in initial SS concentration for the same microbubble ozone dosage, and treatment of sludge with high initial SS concentration was effective in raising the oxidation efficiency of microbubble ozones. On the other hand, as a result of reviewing acid, alkali and microbubble ozone treatment as composite treatment of sludge, use of acid treatment for the pre-treatment of microbubble ozone was more effective than alkali treatment, and in case of treatment at microbubble ozone dosage 0.05g $O_3/g$ SS with the concentration of sulfuric acid infused in the sludge, the amount of removed SS, 153.9 g, was 1.9 times more than 81.2 g the amount of single treatment of microbubble ozone.

• Journal of Microbiology and Biotechnology
• /
• v.14 no.4
• /
• pp.759-765
• /
• 2004

The NCS inhibited the activity of glucosyltransferase which was produced by Streptococcus mutans JC-2, and the rate of inhibition at $100\muM<$ and $200\muM$ were 74.0% and 99.8%, respectively. It was stable in alkali condition, but unstable in acid condition. It was also stable up to $80^{\circ}C$. The kinetic study of the inhibition by NCS was carried out by Lineweaver-Burk plot and Dixon plot. It was non-competitive inhibition, determined by the two plots and $K_i$ and $K_i$ values were $15\muM$ and $19.3\muM$ respectively. The NCS did not show cytotoxicity against human gingival cells at $K_i$ ($15\muM$, $150\muM$, $1,500\mu$ M) concentrations. It had less cytotoxicity than chlohexidin, which has usually been used as the agent of anticaries. To evaluate the industrial applicability of the NCS, human pluck tooth was used. The inhibitory rates of tooth calcification and calcium ion elution by the NCS were 41 % and 2.5 times, respectively. These results suggested that NCS from Bacillus sp. S-1013 is an efficient anticaries agent.

• Microbiology and Biotechnology Letters
• /
• v.14 no.2
• /
• pp.205-208
• /
• 1986

The 23 serovars of Bacillus thuringiensis strain were commonly gram-positive and motile, formed endotoxin crystals, produced acid and alkali in the KIA media, and acid from glucose, hydrolyzed starch, and reduced nitrate but did not produce H$_2$S, oxidase and indole, did not decompose lysine, ornithine, phenylalanine, malonate, lactose, dulcitol, adonitol, inositol, sorbitol, arabinose, raffinose, rhamnose, maltose, and xylose. Eighteen serovars were positive in the MR tests and 15 in the VP tests. Four serovars used citrate. Five serovars produced urease, 5 $CO_2$ from glucose, 2 DNase, and 15 lecithinase. Twelve serovars decomposed arginine, 11 did sucrose, 2 manitol, and 9 salicin Serovar tohokuensis did not hemolyze, but the others did.

• Journal of Conservation Science
• /
• v.35 no.1
• /
• pp.51-60
• /
• 2019

This paper provides quantitative data that describes the evolution of the air quality in the Whale and Sea Museum, located in the Iwate prefecture, collected after the 2011 Great East Japan Earthquake and tsunami. The museum was damaged significantly by the disaster, and restoration works continued for over six years. The air quality in the temporary storage facility and museum was monitored during the rehabilitation process. Evaluation of air quality is carried out by gas chromatography- mass spectrometry, ion chromatography and high-performance liquid chromatography. The results showed that the characteristics of the chemical components differed depending on the measurement locations inside the building. The museum atmosphere tended to be alkaline as the airtightness increased because of the maintenance works at the entrance. It was also determined that it was necessary to study the intake/exhaust routes and to clean them according to the contamination degree. In Japan, there are recommended museum air quality standards for acetic acid, formic acid, alkali, and aldehydes. The results indicated that these standards should not be used as a reference for damaged museums. Furthermore, at the temporary storage facilities for to store the collections during the rehabilitation of the museum, solvents such as ethyl benzene, toluene, and xylene are initially abundant, although they can be reduced by ventilation, while other components such as 2E1H was confirmed in this case are likely to remain.

• Journal of the Korean Applied Science and Technology
• /
• v.23 no.2
• /
• pp.169-176
• /
• 2006

Acrylic adhesives for automobiles protection were prepared by emulsion polymerization. Monomers used were n-butyl acrylate(BA), acrylonitrile (AN), butyl methacrylate(BMA), glycidyl methacrylate(GMA), and acrylic acid (AA). Emulsifiers used were sodium lauryl sulfate and polyoxyethylene lauryl ether, which are an anionic emulsifier and a nonionic emulsifier respectively. Potassium persulfate was used as an initiator and polyvinyl alcohol was used as a stabilizer. Emulsion polymerization was carried out in a semi-batch reactor at $70^{\circ}C$ and agitation speed was kept at 200 rpm. Water resistance, heat resistance, acid resistance, alkali resistance and smoke resistance were examined. As a result, when each 0.03 mole of GMA and AA was introduced, the adhesion properties and various above mentioned resistances of the prepared adhesives were satisfied the standard for automobiles.

• Journal of the Korean Applied Science and Technology
• /
• v.26 no.4
• /
• pp.394-399
• /
• 2009

The esterification of palmitic acid in Jatropha Oil using 8wt% p-TSA catalyst was done at the 1:8 molar ratio of oil to methanol and $65^{\circ}C$. The conversion of palmitic acid appeared to be 95.3% in 60min. After that, the continuous transesterification of the oil using 0.5wt% KOH, 0.8wt% TMAH mixed catalyst[40vol% KOH(0.5wt%) + 60vol% TMAH(0.8wt%)] and 1.1wt% TMAH was conducted with the flow rates and the molar ratios at $65^{\circ}C$. The overall conversion of Jatropha Oil increased with the decrease of flow rate and showed 95.6% with 9ml/min of flow rate at the 1:8 molar ratio of oil to methanol and $65^{\circ}C$. But it showed 87% with 15ml/min of flow rate at the same conditions. The recovery of methanol(%) appeared to be 86% at the 1:8 molar ratio of oil to methanol, mixed catalyst and $65^{\circ}C$.

• Journal of Korean Society for Atmospheric Environment
• /
• v.22 no.4
• /
• pp.431-439
• /
• 2006

Catalytic oxidation of benzene, toluene and xylene (BTX) using regenerated metal oxide catalysts (ZnO-CuO, NiO, $Fe_2O_3$, ZnO, CrO) were investigated in a fixed bed flow reactor to evaluate their feasibility for the purpose of removing volatile organic compounds (VOCs). Four kinds of pre-treatment methods such as gas (air and hydrogen), acid aqueous solution, alkali aqueous solution and cleaning agent were used to find out the optimal regeneration conditions. The physico-chemical properties of the used and regenerated catalysts were characterized by BET and TPR (Temperature Programmed Reduction). The used catalysts showed high conversion ratio and the catalytic ability of toluene oxidation was in the order of ZnO-CuO>$Fe_2O_3$>NiO>ZnO>CrO. We found that the acid aqueous pre-treatment (0.1 N HNO$_3$) was the best way to enhance the catalytic activity of $Fe_2O_3$. In addition, air and hydrogen gas treatment were optimal for NiO and ZnO-CuO catalysts, respectively. Furthermore, the decomposition of BTX depends on the type of a catalyst and a gas molecule.

• Korean Journal of Pharmacognosy
• /
• v.27 no.3
• /
• pp.254-261
• /
• 1996

A potent immuno-stimulating activity was detected from the watersoluble and ethanol-precipitated crude extract (AG-1) of the root of Angelica gigas Nakai. The crude extract was fractionated into two fractions, an acidic AG-2 and a neutral AG-3 fraction by DEAE-cellulose adsorption. The two fractions contained polysaccharides of which M.W. were 10 Kdal and >2,000 Kdal respectively, proteins, and various inorganic components. The immunostimulating activities of two fractions were not reduced by proteinase K, acid or alkali treatment. The polysaccharides obtained from the root of A. gigas were mainly composed of arabinose, galactose, and galacturonic acid. These results indicated that immuno- stimulating components of the root of A. gigas was a kind of pectic polysaccharides or arabinogalactans.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.32 no.3
• /
• pp.48-56
• /
• 2000

Yellow dye-stuffs in natural plant were extracted from a gardenia, saffron, safflower, amur tree and pagoda. And then they were used to color Korean handmade paper(Hanji) on using a mordant. The results of the degree of discoloration are as follows. 1. As for a gardenia(Gardenia jasminodes Ellis for. grandiflora Makino), the effects of coloring were outstanding in the acid area. But for the preservation, it might be desirable that used a lye in a dye-stuff obtained at $40{\pm}5^{\circ}C$. 2. As for saffron(Curcuma longa L.), when used alum as a mordant, it was colored to a medium yellow color with green color. But easily discolorated and was not desirable. And, it didn't fit in a dye-stuff of Hanji. 3. For safflower(Carthamus tinctorius L.), when pH was in the low acid it was colored to the cleaner yellow color. It was the distinction of discoloration that the degree of brightness's increase was low. 4. For amur cork-tree(Phellodendron amurense Rupr.), the effects of yellow coloring were great in the areas of acidity and alkali. But, when used alum, the degree of the discoloration was high and was not effective. 5. For pagoda tree(Styphnolobium Japonica L.), using a calcium hydroxide as a mordant, enabled the more than average yellow to be gained. The degree of discoloration was good.