• Korean Journal of Veterinary Research
• /
• v.61 no.4
• /
• pp.40.1-40.6
• /
• 2021

Acid-base disorder is a common problem in veterinary emergency and critical care. Traditional methods, as well as the Stewart method based on strong ion difference concepts and the Fencl-Stewart method, can be used to analyze the underlying causes. On the other hand, there are insufficient comparative study data on these methods in cats. From 2018 to 2020, 327 acid-base analysis data were collected from 69 sick and 18 healthy cats. The three most well-known methods (traditional method, Stewart method, and Fencl-Stewart method) were used to analyze the acid-base status. The frequency of acid-base imbalances and the degree of variation according to the disease were also evaluated. In the traditional acid-base analysis, 5/69 (7.2%) cats showed a normal acid-base status, and 23.2% and 40.6% of the simple and mixed disorders, respectively. The Fencl-Stewart method showed changes in both the acidotic and alkalotic processes in 64/69 (92.8%), whereas all cats showed an abnormal status in the Fencl-Stewart method (semiquantitative approach). The frequencies of the different acid-base imbalances were identified according to the analysis method. These findings can assist in analyzing the underlying causes of acid-base imbalance and developing the appropriate treatment.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.19 no.3
• /
• pp.35-43
• /
• 2011

In this study, anaerobic biological decomposition were attempted after solubilization treatment of sewage sludge with the complex pre-treatment (acid/base treatment with ultrasonic radiation). Solubilization ratios were compared for ultrasonic treatment at acid or base condition. Solubilization effect of the complex pre-treatment was more effective at higher pH. Biological decomposition of complex pre-treated sludge was faster than non treated (raw) sludge, showing 10 times higher total gas production. Biological digestion of the sludge shows more biogas production. B/A ratio. which indicates hydrogen production potential, was 50% higher with complex pre-treated sludge than raw sludge but lactic acid or propionic acid were also detected during anaerobic decomposition process.

• Korean Journal of Materials Research
• /
• v.5 no.5
• /
• pp.620-624
• /
• 1995

To study the acid and base properties of chemical-treated natural zeolite, FT-IR analysis was performed by the adsorption of pyridne and pyrrole and thermo-gravimetric analysis was done by the adsorption of NH$_{3}$. These solid catalysts have two acid sites, which are related to the Bronsted and Lewis acid sites, respectively. HIC-treatment led to the increased acidity and the maintained basicity.Acidity of NaHO-treatment samples also increased with thr NaOH-treatment but basicity decreased. The p-xylene selectivity on the chemical-treatment zelite was higher than that on the untreated zeolite.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.11
• /
• pp.1462-1468
• /
• 2010

The effects of vitamin C and vitamin E with selenium on acid-base balance and some stress hormones were evaluated during heat stress in goats. Goats, 1.5 years of age, were divided into control, heat stress and antioxidant treatment groups 1, 2 and 3. Except for the control, all groups were exposed to a temperature of $40{\pm}2^{\circ}C$ with a relative humidity of 30% for 5 h/d for 21 days in a psychrometric chamber. Rectal temperature and respiratory rates were recorded daily post exposure. Blood samples were collected on every 3rd day for estimation of plasma vitamins C and E, total antioxidant activity and hormones, and separate blood samples were taken to estimate acid-base status. The rectal temperature and respiratory rates were increased (p<0.05) in the heat stress group only. Except for pH and $pO_2$, which were increased significantly (p<0.05) other parameters of acid-base balance such as $pCO_2$, $HCO_3^-$, $TCO_2$, BEb, BEcef, PCV and Hb were significantly decreased (p<0.05) in the heat stress group. An improvement in acid-base status was noted in the antioxidant supplemented groups. Prolactin and cortisol levels were significantly (p<0.05) higher and free T3 and T4 levels were significantly (p<0.05) lower in the heat stress group. Levels of prolactin and cortisol were decreased and free T3 and T4 were increased in antioxidant treatment groups. Different levels of antioxidant supplementation resulted in similar protection against heat stress.

• Journal of the Korean Chemical Society
• /
• v.43 no.6
• /
• pp.707-719
• /
• 1999

This article studies the understanding of acid and base concepts of the 3rd-grade students in middle school. An effective teaching strategy for improving their acid and base concepts was designed by considering students' prior knowledge using Lawson's learning cycle method. The control group was adapted by the traditional teaching strategy which isn't considering students' prior knowledge. After the class, understanding of acid and base concepts of treatment group was significantly higher than that of control group. But the level of students' understanding of strong acid, weak acid strong base and the strength of acid in aqueous solution was low even after the class of two groups. This indicates indirectly that the microscopic views of acid and base concepts in aqueous solution are not easy to learn for these students. For the four categories of acid and base concepts, students' responses were reviewed carefully and classified into scientific conceptions and misconceptions. These results will be useful for developing an effective teaching strategy of acid and base concepts.

• Journal of Environmental Science International
• /
• v.1 no.2
• /
• pp.105.1-113
• /
• 1992

The present study was performed to develop the removal system of the offensive gases, including hydrogen sulfide of acid gas, ammonia or amice of base gas, from the nightsoil treatment plant. In order to remove the offensive gases, the Fe-EDTA system liquid phase catalytic oxidation method with the bubble lift column reactor was employed. From the results obtained, it was confirmed that the offensive gases can be deodorized simultaneously and also hydrogen sulfide of acid gas, ammonia of base gas completely removed at pH 6.45. In addition, as input gases feed rate the efficiency of acid gas did not change but the efficiency of base gases decreased to approximately 90 % at pH 6, 0. From the result of particle size analyzer, it was found that the particle sizes including sulfur and other impurites grew up to $21{\mu}m$ over 72hour reaction time.

• The Journal of Advanced Prosthodontics
• /
• v.8 no.6
• /
• pp.504-510
• /
• 2016

PURPOSE. Polyamide polymers do not provide sufficient bond strength to auto-polymerized resins for repairing fractured denture or replacing dislodged denture teeth. Limited treatment methods have been developed to improve the bond strength between auto-polymerized reline resins and polyamide denture base materials. The objective of the present study was to evaluate the effect of surface modification by acetic acid on surface characteristics and bond strength of reline resin to polyamide denture base. MATERIALS AND METHODS. 84 polyamide specimens were divided into three surface treatment groups (n=28): control (N), silica-coated (S), and acid-treated (A). Two different auto-polymerized reline resins GC and Triplex resins were bonded to the samples (subgroups T and G, respectively, n=14). The specimens were subjected to shear bond strength test after they were stored in distilled water for 1 week and thermo-cycled for 5000 cycles. Data were analyzed with independent t-test, two-way analysis of variance (ANOVA), and Tukey's post hoc multiple comparison test (${\alpha}=.05$). RESULTS. The bond strength values of A and S were significantly higher than those of N (P<.001 for both). However, statistically significant difference was not observed between group A and group S. According to the independent Student's t-test, the shear bond strength values of AT were significantly higher than those of AG (P<.001). CONCLUSION. The surface treatment of polyamide denture base materials with acetic acid may be an efficient and cost-effective method for increasing the shear bond strength to auto-polymerized reline resin.

• Journal of Environmental Science International
• /
• v.17 no.5
• /
• pp.565-571
• /
• 2008

The surface properties of activated carbon modified by acids and base were studied. The influence of the surface chemistry on the adsorption of benzene and acetone vapor on modified activated carbons has been investigated The modified activated carbons were obtained by treatment with acetic acid ($CH_3COOH$), nitric acid ($HNO_3$) and sodium hydroxide (NaOH). The modified activated carbons had similar porosity but different surface chemistry and adsorption characteristics. The total surface acidity (sum of functional groups) of activated carbon (AC-AN) treated by nitric acid was 2.6 times larger than that of activated carbon (AC) before the acid treatment. Especially, carboxyl group was much developed by nitric acid treatment. The benzene equilibrium adsorption capacity of AC-AN decreased 20% more than that of AC. However, the acetone equilibrium adsorption capacity of AC-AN increased 20% more than that of AC because of the large increase of carboxyl group and acidity.

• Transactions of the Korean hydrogen and new energy society
• /
• v.17 no.4
• /
• pp.434-439
• /
• 2006

In this study, activated carbon(ACs) have been modified by nitric acid and heat-treatment. The surface and structure properties of ACs were determined by BET surface area, FT-IR pH and acid/base value. The changes in pore structure and surface properties of these modified ACs were correlated with natural gas adsorption which measured by volumetric apparatus at $0^{\circ}C$ and $25^{\circ}C$. The pore textural properties of activated carbon was also characterized by nitrogen adsorption at 77 K. Specific surface area and micropore volume of them were calculated by Langmuir equation and Horvath-Kawazoe method, and chemical properties of surface were measured by FT-IR and titration of acid and base solutions. Pore texture of activated carbons after treatments were not significantly changed. Total acidity increased and basicity of samples decreased. however the basicity increased with heat treatment. The methane adsorption of ACs become different depending on the acid/base value of samples.

• Carbon letters
• /
• v.2 no.2
• /
• pp.109-112
• /
• 2001

For the adsorption of ammonia, activated carbon fibers (ACFs) were subjected to sulfuric acid treatment in order to modify the surface functional groups. The surface acid and base value of ACFs were measured using titration and FT-IR spectrometry. SEM was used to investigate the surface morphology. Acid treatments by $H_3PO_4$, $H_2SO_4$, and $HNO_3$ were performed to increase the adsorption capacity of $NH_3$. As a result, Cellulose-based ACF has high adsorption capacity for ammonia. The ammonia removal efficiency of ACF was the maximum which was treated by 15 wt% sulfuric acid at $100^{\circ}C$ for 60 min. The average pore diameter little increased from $19{\AA}$ to $20.8{\AA}$ and the specific surface area of ACF considerably decreased and acid values increased by 15 wt% sulfuric acid treatment. Ammonia reacted with sulfonyl radicals. After adsorption of ammonia, white material was grown on the surface of ACF through the adsorption of ammonia and it was determined to ammonium sulfate.