• Current Optics and Photonics
• /
• v.7 no.3
• /
• pp.273-282
• /
• 2023

This paper presents a new method for redistributing effectively the first orders of each lens element to achromatize and athermalize an optical system, by introducing a novel method for adjusting the slope of an achromatic and athermal line. This line is specified by connecting the housing, equivalent single lens, and aberration-corrected point on a glass map composed of available plastic and glass materials for molding. Thus, if a specific lens is replaced with the material characterized by the chromatic and thermal powers of an aberration-corrected point, we obtain an achromatic and athermal system. First, we identify two materials that yield the minimum and maximum slopes of the line from a housing coordinate, which specifies the slope range of the line spanning the available materials on a glass map. Next, redistributing the optical first orders (optical powers and paraxial ray heights) of lens elements by moving the achromatic and athermal line into the available slope range of materials yields a good achromatic and athermal design. Applying this concept to design a mobile-phone camera lens, we efficiently obtain an achromatic and athermal system with cost-effective material selection, over the specified temperature and waveband ranges.

• Korean Journal of Optics and Photonics
• /
• v.13 no.4
• /
• pp.275-282
• /
• 2002

We derived analytic formulae for the correction of spherical aberration, coma, and axial color of a two-components lens system consisted of a cemented doublet and a singlet by using the thin lens approximation. The correction formulae were applied to design a telephoto lens system. We examined two kinds of glass combinations in the design, one was crown-flint-crown combination and the other was flint-crown-flint combination. We found two kinds of achromatic aplanat solutions in the crown-flint-crown combination. For the case of flint-crown-flint combination, there were also two kinds of solutions, but their configurations are not useful in practice.

• Korean Journal of Optics and Photonics
• /
• v.4 no.3
• /
• pp.243-251
• /
• 1993

We have derived Gaussian bracket expressions of aplanatic and achromatic conditions and obtained the numerical solutions for each of two modules of the telephoto type telescope objective free from the Seidel first order spherical aberration, coma, and longitudinal chromatic aberration. The system which is for use in sighting a target is optimized within the resolution of eyes. The objective lens satisfying the aplanatic and achromatic condition has f/8.5 with the half field angle 0.$3^{\circ}$, and the telephoto ratio is 0.839 with the focal length of 30 cm.

• Korean Journal of Optics and Photonics
• /
• v.26 no.4
• /
• pp.217-225
• /
• 2015

This paper shows the best selection and combination of glass in lens design, to correct a chromatic aberration using achromatic and apochromatic conditions. Using this research result, we have designed a telecentric lens for machine vision in the full range of visible light. We obtain good optical quality in the form of a quite small RMS wavefront error of $0.057{\lambda}$ in the super-broadband wavelength range 380 nm -780 nm. This result is better than that for a common telecentric lens in the visible wavelength range 486.1-656.2 nm.

• Current Optics and Photonics
• /
• v.2 no.4
• /
• pp.324-331
• /
• 2018

This paper describes a symmetric method for determining a combination of element power and optical material to design a catadioptric system with corrected color aberration and flat Petzval curvature. To graphically obtain the solutions, a glass chart containing the Abbe number, the refractive index, and the optical power, which are closely related to these aberrations, is suggested. First, we recompose an optical system as a doublet of the specific lens and an equivalent single lens, and then locate both lenses on lines that are symmetric to each other on a glass chart, through changing the lens parameters effectively. Utilizing this method, an achromatic catadioptric system with flat Petzval curvature is obtained.

• Korean Journal of Optics and Photonics
• /
• v.29 no.1
• /
• pp.13-18
• /
• 2018

In this study, we present a symmetry graphical method to design an achromatic optical system composed of many lenses on an achromatic glass map. To take into account the lens spacing and the number of lenses, we use the relative ratio of paraxial ray height at each lens and the concept of an equivalent single lens. Converting an arbitrary optical system into various doublet systems, the most effective doublet is then selected to correct the color aberration, through material selection and the redistribution of the optical power. By designing a fisheye lens using this approach, an achromatic optical system is effectively obtained over the visible waveband.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.270-271
• /
• 2003

lens를 통과하는 두 광선(paraxial ray, marginal ray)이 lens의 축이나 focal plane과 만나는 지점이 서로 일치하지 않을 때, 두 개의 서로 다른 교차점 사이의 거리나 높이를 종, 횡 구면수차 (Lateral, Longitudinal Spherical aberration)이라 한다. 수차의 크기는 lens의 굽어짐 (bending)형태에 따라 달라지는데 3차 근사 lens 공식으로 유도한 식은 다음과 같으며, 그 결과의 그래프는 그림.1 과 같다. (중략)

• Current Optics and Photonics
• /
• v.3 no.3
• /
• pp.215-219
• /
• 2019

Chromatic aberrations induced by Risley prisms made of a single material can be substantially compensated using a liquid crystal spatial light modulator while still keeping the prism pairs compact, simple and lightweight. A ${\pm}10^{\circ}$ optical scanning imaging system with ${\pm}2^{\circ}$instantaneous field based on LC-SLM correction is designed as an example. The ultimate simulation results show that this kind of scheme is an effective way of improving imaging performance dynamically across the full field of scanning.