• Elastomers and Composites
• /
• 제47권3호
• /
• pp.231-237
• /
• 2012

본 연구에서는 EPDM 컴파운드에 여러 종류의 충전제를 사용하여 물리적, 기계적 특성을 관찰하였다. 충전제로는 Semi-reinforcing furnace black(SRF), high abrasion furnace black(HAF) 그리고 acetylene black을 사용하였다. 가교제로는 dicumyl peroxide (DCP)를 사용하였다. 레오미터, 경도계, 만능 재료 시험기, 영구 압축 줄음율 그리고 동적 점탄성 분석을 통하여 재료의 성질을 관찰하였다. EPDM 컴파운드에 충전제로 SRF를 사용하였을 때함량의 증가에 따라 인장강도와 파단 연신율은 증가하였으나, acetylene black을 사용하였을 때 함량의 증가에 따라 인장강도와 파단 연신율은 감소하였다. Acetylene black을 사용하였을 때 넓은 온도 범위에서 저장탄성률의 변화율이 적었다. 또한 EPDM 컴파운드의 tan ${\delta}$는 acetylene black을 사용하였을 때 우수한 결과를 보였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 영호남학술대회 논문집
• /
• pp.124-127
• /
• 2000

The purpose of this study is to research and develop PAn-Carbon composite electrode for Supercapacitor. Supercapacitor cell of PAn-Carbon composite electrode with 1M $LiClO_{4}/IPC$ brings out good capacitor performance below 4.0V. The radius of semicircle of PAn-Carbon composite electrode adding 30wt% Acetylene Black was absolutely small. The total resistance of Supercapacitor cell mainly depended on internal resistance of he electrode. The discharge capacitance of PAn-Carbon on composite with 30wt% Acetylene Black in 1st and 50th cycles was 29 and 31F/g at current density of $1mA/cm^2$. The capacitance of PAn-Carbon composite with 30wt% Acetylene Black capacitor was larger than that of PAn capacitor without Acetylene Black. The coulombic efficiency of supercapacitor at discharge process of 1 and 50 cycles were 94 and 100%. respectively. PAn-Carbon composite Supercapacitor with 30wt.% Acetylene Black content showed good capacitance and stability with cycling.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 추계학술대회 논문집
• /
• pp.80-83
• /
• 2007

In order to characterize the catalytically active sites on carbon black, acetylene chemisorption had been examined recently at 773 and 873 K by using a pulse technique. As the inject ion was repeated at 773 K, the adsorbed amount gradually decreased and eventually the adsorption did not occur any more. At 873 K a constant amount of $C_2H_2$ was consumed repeatedly after several injections. Good linear relationships were obtained between the methane decomposition rate at 1123 or 1173 K and the cumulative acetylene adsorption at 773 K or the constant acetylene consumption at 873 K. Reasonable models for the associative acetylene chemisorption at 773 K and the constant acetylene consumption at 873 K on the armchair face at the edges of graphene layers were proposed. The constant consumpt ion may be explained by the "$C_2H_2$-addition-hydrogen- abstract ion (CAHA)" mechanism.

• Journal of Electrochemical Science and Technology
• /
• 제11권4호
• /
• pp.430-436
• /
• 2020

Lithium thionyl chloride (Li/SOCl₂) batteries exhibit the highest energy densities seen in commercially available primary batteries because of their high operating voltages and discharge capacities. They are widely used in various extreme environments; however, they show signs of degradation at high discharge currents. The discharge performance of Li/SOCl₂ is considered to be greatly dependent on the carbon materials used in the cathode. Therefore, suitable carbon materials must be chosen to improve discharge performances. In this work, we investigated the discharge properties of Li/SOCl₂ batteries in which the cathodes contained various ratios of acetylene black (AB) and multi-walled carbon nanotubes (MWCNTs) at high discharge currents. It was confirmed that the MWCNTs were effectively dispersed in the mixed AB/MWCNT cathodes. Moreover, the discharge capacity and operating voltage improved at high discharge currents in these mixed cathodes when compared with pure AB cathodes. It was found that the mesopores present in the cathodes have a strong impact on the discharge capacity, while the macropores present on the cathode surface influence the discharge properties at high discharge rates in Li/SOCl₂ batteries. These results indicate that the ratio of mesopores and macropores in the cathode is key to improving the discharge performance of Li/SOCl₂ batteries, as is the dispersion of the MWCNTs.

• Elastomers and Composites
• /
• 제44권1호
• /
• pp.47-54
• /
• 2009

본 연구에서는 다양한 종류의 보강제를 혼합한 EPDM 컴파운드의 원적외선에 의한 가교 반응을 조사하였다. 보강제가 원적외선에 의한 가교 반응에 미치는 영향을 평가하기 위하여 컴파운드의 발열 온도 및 DSC 분석에 의한 가교도를 측정하였으며, 특히 원적외선에 의한 가교 특성을 비교하기 위하여 동일 조건에서 열풍에 의한 가교 반응을 조사하였다. 원적외선 가교 조건에서 카본블랙을 혼합한 EPDM 컴파운드는 입자크기가 증가함에 따라 열전도도가 증가하며 이에 따라 원적외선에 의한 가교도 역시 증가하였으나, 열풍에 의한 가교도의 변화에는 거의 영향을 주지 못하였다. 보강제 종류에 따른 원적외선 가교 특성 평가 결과, 열전도도가 높은 아세틸렌 블랙을 함유한 컴파운드의 가교도가 가장 높게 나타났으며, 열전도도가 유사한 카본블랙 및 침강실리카의 경우 상대적으로 원적외선 흡수 특성이 우수한 침강실리카 배합 컴파운드의 경우 원적외선에 의한 가교도가 높게 나타났다.

• 한국전기전자재료학회논문지
• /
• 제18권8호
• /
• pp.702-707
• /
• 2005

Spinel $LiMn_2O_4$ has become appealing because manganese is inexpensive and environmentally benign. In general, cathodes for lithium ion batteries include carbon as a conductive agent that provides electron transfer between the active material and the current collector. In this work, we selected Acetylene Black and Super P Black as conductive agents, and then carried out their comparative investigation for the performances of the $Li/LiMn_2O_4$ cells using different conductive agents with different particle size. In addition, their electrochemical impedance characteristic of $Li/Mn_2O_4$ cells using different conductive agents is effectively identified through a.c. impedance technique. As a consequence, $Li/LiMn_2O_4$ cells with Super P Black show better electrochemical performances ascribed to the significant contribution of feasible ionic conduction due to larger particle size than those with Acetylene Black.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.593-594
• /
• 2005

Lithium-ion batteries have used the layered $LiCoO_2$ materials as cathodes, but Co is relatively toxic and expensive. In this regard, the spinel $LiMn_2O_4$ has become appealing because manganese is inexpensive and environmentally benign. In general, cathodes for lithium ion batteries include carbon as a conductive agent that provides electron transfer between the active material and the current collector. In this work, we selected Acetylene Black and Super P Black as conducting agents, and then carried out comparative investigation for the performances of the cells using different conducting agents with different particle size. As a consequence, Li/$LiMn_2O_4$ cells with Super P Black show better electrochemical performances than those with Acetylene Black.

• Carbon letters
• /
• 제12권4호
• /
• pp.243-248
• /
• 2011

Two different types of graphite, such as flake graphite (FG) and spherical graphite (SG), were used as anode materials for a lithium-ion secondary battery in order to investigate their electrochemical performance. The FG particles were prepared by pulverizing natural graphite with a planetary mill. The SG particles were treated by immersing them in acid solutions or mixing them with various carbon additives. With a longer milling time, the particle size of the FG decreased. Since smaller particles allow more exposure of the edge planes toward the electrolyte, it could be possible for the FG anodes with longer milling time to deliver high reversible capacity; however, their initial efficiency was found to have decreased. The initial efficiency of SG anodes with acid treatments was about 90%, showing an over 20% higher value than that of FG anodes. With acid treatment, the discharge rate capability and the initial efficiency improved slightly. The electrochemical properties of the SG anodes improved slightly with carbon additives such as acetylene black (AB), Super P, Ketjen black, and carbon nanotubes. Furthermore, the cyclability was much improved due to the effect of the conductive bridge made by carbon additives such as AB and Super P.

• 공업화학
• /
• 제18권1호
• /
• pp.84-89
• /
• 2007

본 연구에서는 열플라즈마 직접분해법에 의해 메탄과 프로판으로부터 수소와 카본 블랙을 생성하는 공정에 대해 조사하였다. 메탄과 프로판의 직접분해 시 열역학적 평형조성을 깁스 자유에너지의 최소화에 근거하여 계산하였으며, 이를 바탕으로 직접분해 실험을 수행하였다. 탄화수소의 직접분해에 의해 생성된 수소의 순도는 분해가스 유량에 의존하는 것으로 나타났으며, 고순도의 수소를 얻기 위한 분해 조건을 조사하였다. 메탄을 분해가스로 사용한 경우 프로판의 경우보다 높은 수소의 순도를 나타내는데, 이는 열플라즈마에 의해 생성된 라디칼의 재결합 등으로 인한 메탄이나 에탄, 그리고 아세틸렌과 같은 부산물이 프로판의 경우에 더욱 많이 생겨나기 때문인 것으로 조사되었다. 생성된 카본블랙은 X선 회절분석과 Raman Spectroscopy 분석을 통해 결정성을 조사하였으며, SEM 분석 및 입도 분석을 통해 카본블랙의 입자 모양과 크기를 조사하였다. 그 결과 구형이며 결정성이 양호한 카본블랙이 생성되었음을 확인하였으며, 메탄으로부터 생성된 카본 블랙이 프로판으로부터 생성된 카본블랙보다 평균 입자 크기가 작은 것으로 나타났다.

• 한국수소및신에너지학회논문집
• /
• 제13권1호
• /
• pp.42-51
• /
• 2002

Methane can be converted directly to hydrogen by pyrolysis. The reaction is highly endothemic and heat must be supplied at high temperatures. Gibbs free energy minimization calculations have been carried out for the methane pyrolysis to determine equilibrium products. The calculation parameters are the temperature, the initial H/C ratio, the pressure and Gibbs energies of each substance. Methane, ethylene, acetylene, benzene, naphthalene, and hydrogen are the main products. Excluding hydrogen, it is observed that ethylene and aromatics(benzene+naphthalene) are predominant products below 1400K, whereas acetylene is significantly formed above 1400K. Hydrogen dilution increases the selectivities for ethylene and acetylene and decreases the selectivity for aromatics. Increasing the pressure also decreases the decomposition of methane.