• 대한치과기공학회지
• /
• 제30권2호
• /
• pp.87-92
• /
• 2008

Purpose: In this study, we tried to compare marginal accuracy when produce ceramic crown using all ceramic materials and existent metal-ceramic system. Material and methods: All-ceramic systems were E-max (Ivoclar/Vivadent, Lichtenstein), Lava(3M, U.S.A.) and Wol-ceram(Teamziereis, Germany). Metal-ceramic system(PFG) was composed of Au-Pt alloy (Metalor, Switzerlandand) and overlying ceramic(D-sign, Ivoclar/Vivadent, Lichtenstein). We fabricated metal master die with upper diameter of 7.95mm, bottom diameter of 9.00mm, height of 5.00mm, and taper of $6^{\circ}$. All ceramic system used 0.5mm thickness ceramic coping, while metalceramic system used 0.3 thickness metal coping. By adding dentin and enamel ceramics on each coping, a crown with a proximal thickness of 1.0 mm and occlusal thickness of 2.0mm was fabricated. Pressure of 2kg was applied for 10 seconds on each crown with static load compressor. Before and after cementation, we measured the marginal gap at 4 points of each crown using optical microscope. The data was analyzed using a Student's t test and repeated-measures of analyses of variance(ANOVA) followed by a Bonferroni test. A p value<0.05 was considered significant. Results: As experiment results, marginal accuracy of wol-ceram and Lava is no good when compared with marginal accuracy of PFG. But marginal accuracy of E.max is good when compared with PFG. This result showed not significant. The marginal accuracy of E.max is good when compared with marginal accuracy of wol-ceram and Lava. Conclusion: The marginal accuracy of E.max is very good when compared with marginal accuracy of another group.

• 대한지리학회지
• /
• 제42권1호
• /
• pp.1-14
• /
• 2007

본 연구에서는 우리나라 육상 국지 예보 구역을 대상으로 예보 정확도를 분석하였다. 연구 기간 동안 평가 요소별 정확도는 강수 유무가 가장 낮았고 하늘 상태가 가장 높았다. 지역적으로 예보 정확도는 강원도에서 가장 낮았으며 경상남도와 경상북도에서 높았다. 계절별 예보 정확도의 만점 빈도는 겨울에 가장 높았고 여름에 가장 낮았다. 예보 정확도가 낮은 날의 기압 배치형을 분석했을 때 여름철에는 정체전선형 기압 배치에서 강수 유무의 예보 정확도가 낮았다. 가을과 겨울에는 한대 고기압 확장형 기압 배치에서 기온 예보의 정확도가 크게 낮아지는 경우가 많았다. 봄과 가을의 이동성 고기압형 기압 배치에서는 날씨가 급격하게 변하여 예보 정확도가 낮았다. 예보 정확도가 가장 낮은 지역인 영동 지역의 상층 850hPa 고도의 풍향 자료와 예보 정확도를 비교하여 분석한 결과, 최저 및 최고 기온은 서풍일 때, 강수 유무의 경우 동풍일 때 예보 정확도가 낮았다.

• 한국측량학회지
• /
• 제23권2호
• /
• pp.137-145
• /
• 2005

이 논문에서는 선형 푸시브룸 방식으로 촬영한 위성영상에 대한 다양한 센서모델들의 정확도를 비교분석하고자 한다. 특히 이 논문에서는 센서모델의 정확도를 번들조정의 정확도와 외부표정요소추정의 정확도로 분리하여 고찰하려고 한다. 번들조정 정확도는 수립된 센서모델이 얼마나 기준점에 잘 부합하는 가를 알려주는 척도로 이제까지 대부분의 센서모델 정확도 분석에 사용되어온 기준이다. 이에 반하여 외부표정요소추정의 정확도는 센서모델이 얼마나 정확하게 촬영당시의 위성의 궤도 및 자세를 예측할 수 있는 지의 척도로서 매우 중요한 요소임에도 불구하고 기존의 연구에서 간과해온 부분이다. 이 논문에서는 여러 센서모델 중에서 사진측량분야에서 주로 사용하는 변형된 공선방정식기반 모델과 위성지상국 또는 자세제어분야에서 주로 사용하는 궤도좌표계 및 자세각에 기반한 모델의 정확도를 비교분석하고자 한다. 실험은 다목적실용위성 1호 EOC 영상과 GPS 수신기에서 취득한 기준점을 사용하였다. 실험결과 번들조정 정확도는 두 모델이 큰 차이를 보이지 않는 것으로 나타났으나 외부표정요소추정 정확도는 궤도좌표계 및 자세각에 기반한 모델이 더 나은 성능을 보였다.

• The Journal of Advanced Prosthodontics
• /
• 제12권6호
• /
• pp.361-368
• /
• 2020

PURPOSE. The present study aimed to evaluate the accuracy of a desktop scanner and intraoral scanners based on the volumetric dimensions of a complete arch. MATERIALS AND METHODS. Seven reference models were fabricated based on the volumetric dimensions of complete arch (70%, 80%, 90%, 100%, 110%, 120%, and 130%). The reference models were digitized using an industrial scanner (Solutionix C500; MEDIT) for the fabrication of a computer-aided design (CAD) reference model (CRM). The reference models were digitized using three intraoral scanners (CS3600, Trios3, and i500) and one desktop scanner (E1) to fabricate a CAD test model (CTM). CRM and CTM were then superimposed using inspection software, and 3D analysis was conducted. For statistical analysis, one-way analysis of variance was used to verify the difference in accuracy based on the volumetric dimensions of the complete arch and the accuracy based on the scanners, and the differences among the groups were analyzed using the Tukey HSD test as a post-hoc test (α=.05). RESULTS. The three different scanners showed a significant difference in accuracy based on the volumetric dimensions of the complete arch (P<.05), but the desktop scanner did not show a significant difference in accuracy based on the volumetric dimensions of the complete arch (P=.808). CONCLUSION. The accuracy of the intraoral scanners was dependent on the volumetric dimensions of the complete arch, but the volumetric dimensions of the complete arch had no effect on the accuracy of the desktop scanner. Additionally, depending on the type of intraoral scanners, the accuracy differed according to the volumetric dimensions of the complete arch.

• 농업과학연구
• /
• 제48권4호
• /
• pp.681-691
• /
• 2021

The estimated breeding value (EBV) and accuracy of Hanwoo steer (Korean cattle) is an indicator that can predict the slaughter time in the future and carcass performance outcomes. Recently, studies using pedigrees and genotypes are being actively conducted to improve the accuracy of the EBV. In this study, the pedigree and genotype of 46 steers obtained from livestock farm A in Gyeongnam were used for a pedigree best linear unbiased prediction (PBLUP) and a genomic best linear unbiased prediction (GBLUP) to estimate and analyze the breeding value and accuracy of the carcass weight (CWT), eye muscle area (EMA), back-fat thickness (BFT), and marbling score (MS). PBLUP estimated the EBV and accuracy by constructing a numeric relationship matrix (NRM) from the 46 steers and reference population I (545,483 heads) with the pedigree and phenotype. GBLUP estimated genomic EBV (GEBV) and accuracy by constructing a genomic relationship matrix (GRM) from the 46 steers and reference population II (16,972 heads) with the genotype and phenotype. As a result, in the order of CWT, EMA, BFT, and MS, the accuracy levels of PBLUP were 0.531, 0.519, 0.524 and 0.530, while the accuracy outcomes of GBLUP were 0.799, 0.779, 0.768, and 0.810. The accuracy estimated by GBLUP was 50.1 - 53.1% higher than that estimated by PBLUP. GEBV estimated with the genotype is expected to show higher accuracy than the EBV calculated using only the pedigree and is thus expected to be used as basic data for genomic selection in the future.

• 한국항행학회논문지
• /
• 제27권6호
• /
• pp.841-848
• /
• 2023

위성 항법 장치 (GPS; global positioning system) 항법메시지에 포함된 Klobuchar 전리층모델은 L1 단주파수 사용자들에게 전리층 보정정보를 제공한다. 전리층모델 정확도는 항법해의 정확도에 큰영향을 끼치므로 이에 관한 분석이 필요하다. 본 연구에서는 1993년부터 2022년까지의 GPS 항법메시지를 조사하여 Klobuchar 모델의정확도 및 계수 존재 여부와 효용성 여부를 분석 하였다. 초기 GPS 항법메시지의 경우 전리층데이터를 포함하지 않는 경우가 많으며, 전리층모델을 포함되어 있더라도 정확도가 상당히 낮은 경우가 많이 존재하였다. 전리층모델의 정확도가 안정화된 2002년부터 2022년까지 전리층모델의 정확도 변화와 지자기 위도에 따른 정확도 차이를 IGS (International GNSS Service)에서 제공하는 전리층모델과 비교하는 방법으로 분석하였다.

• 품질경영학회지
• /
• 제51권4호
• /
• pp.619-632
• /
• 2023

Purpose: The main function of INS (Inertial Navigation System) is to measure the position of an armed vehicle and its performance is confirmed through the positioning accuracy test of Korean Defense Standards (KDS). The current standards, however, do not provide clear test methods and the conditions for performing positioning accuracy tests. Accordingly, the purpose of this study is to develop a new method for positioning accuracy test which would be effective. Methods: In this study, a new INS positioning accuracy test method is suggested based on the analysis of test data collected through a statistical experiment known as central composite design. For the positioning accuracy experiment of K105A1, a self-propelled artillery, two factors of driving velocity and driving distance are considered. Results: Based on the analysis of experimental data, a regression model for the positioning error is fitted and the positioning accuracy test of INS is so developed to maximize the positioning error. The standard proximity rate is used as an additional test criterion to evaluate the performance level of INS. Conclusion: The proposed new positioning accuracy test for INS has the advantage of finding the nonconforming items effectively. It is also expected to be utilized for the other similar INS positioning accuracy tests.

• 한국산업융합학회 논문집
• /
• 제7권4호
• /
• pp.355-361
• /
• 2004

The finite element method were used to determine the stress intensity factor of cracked plate. The stress method, displacement method and J Integral are most popular finte element method. ANSYS proposed another a kind of displacement method. In this paper, it was examined that the accuracy and utility of the ANSYS method could believable to determine the stress intensity factors of centered inclined crack. Generally, inclined crack has two portion of stress intensity factors, tensile mode F1 and shear mode F2. For the purpose of increasing the accuracy of stress intensity factors, examined the effect of the numbers of nodes and elements, crack tip element size and number of partition of the crack tip vicinity. It was found that the method proposed by ANSYS is useful and has high accuracy. Accuracy of calculated stress intensity factors was increased by increase of the number of nodes and elements, and at the small size of crack tip elements can get more highly accuracy.

• 한국공작기계학회논문집
• /
• 제14권2호
• /
• pp.48-54
• /
• 2005

The theodolite system consists of two theodolites, a scale bar and a target bu. A measurement accuracy of theodolite system is affected by a measurement distance of each equipment. This study was performed fir measuring an accuracy when the distance from theodolite to scale bar was changed 2~ 6 m on two theodolites distance 3 a The results showed thai the measurement accuracy could be $\pm$0.021 mm when the distance from theodolite to target was 2,3 and 6 n Specially, it was found that the maximum measurement accuracy was 10.017mm on theodolite collimation distance 3m and the distance 4 m of the theodolite and scale bar.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.217-220
• /
• 2005

Currently, a number of control points are required in order to achieve accurate geolocation of satellite images. Control points can be generated from existing maps or surveying, or, preferably, from GPS measurements. The requirement of control points increase the cost of satellite mapping, let alone it makes the mapping over inaccessible areas troublesome. This paper investigates the possibilities of modeling an entire imaging strip with control points obtained from a small portion of the strip. We tested physical sensor models that were based on satellite orbit and attitude angles. It was anticipated that orbit modeling needed a sensor model with good accuracy of exterior orientation estimation, rather then the accuracy of bundle adjustment. We implemented sensor models with various parameter sets and checked their accuracy when applied to the scenes on the same orbital strip together with the bundle adjustment accuracy and the accuracy of estimated exterior orientation parameters. Results showed that although the models with good bundle adjustments accuracy did not always good orbit modeling and that the models with simple unknowns could be used for orbit modeling.