• The Journal of Dong Guk Oriental Medicine
• /
• v.7 no.1
• /
• pp.43-51
• /
• 1998

Renal tissues of ICR mouse were intraperitoneally injeced with Porpbyra yezoensis extract(PE) after Triton WR-1339(TX) injection were observed to investigate the cholesterol accumulation decreasing effect of PE. The renal tissues were obtained at hour 24, 48, and 72 after TX injection that were fixed in fromol-calcium solution and were cryocut. The tissue stained by sudan black B for lipid and perchloric acid-naphthoquinone method for cholesterol. The parietal layer of Bowman's capsule is swelled as cuboidal type at hour 48 after TX injection and the lipid blot and cholesterol particle were noticeably increased in glomerulus and these appeared in convoluted tubule, collecting tubule, and Helen's loop. In PE treated group, the lpid blot and cholesterol particle were considerably decreased in glomerulus than TX group. As results indicated that the accumulation of lipid including cholesterol caused by TX injection were mitigated in renal tissues by the antihypercholesterolemia effect of PE.

• Korean Journal of Environmental Biology
• /
• v.41 no.4
• /
• pp.447-454
• /
• 2023

This study was conducted to analyze the effects of stand density on fire fuel (FF) changes in a Chamaecyparis obtusa forest. The study site was located in Mt. Munsu in Jeollabuk-do and consisted of a control, 30% thinning treatment(LT), and 50% thinning treatment(HT). Three-year-old seedlings were planted at a density of 3,000trees ha^-1 in 1976, and thinning was carried out in 2000. FF production was measured every 2 months by installing 3 circular litter traps 1.2m above the ground. Litter bags containing 5g of each leaf and branch were made and buried in the organic layer to investigate the FF decomposition rate. The decay constant was calculated after 18 months. FF accumulation was measured by collecting dry-weight organic matter from each plot using a square frame (0.09 m²) in September 2018. The FF production in LT and HT was significantly lower than that of the control(P<0.001). The leaf decay constant for HT was significantly lower than that of the control (P<0.05). The FF accumulation in HT was significantly lower than that of the control (P<0.01), but LT was not significantly different from the control. The results of this study showed that thinning decreased FF production.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.224-224
• /
• 2016

Many researchers have been tried to improve the performance of the phosphorescent organic light-emitting diode(PHOLED) by controlling of the dopant profile in the emission layer. In this work, as shown in Fig. 1 insert, a typical red PHOLED device which has the structure of ITO/NPB(50nm)/CBP(30nm)/TPBi(10nm)/Alq3(20nm)/LiF(0.8nm)/Al(100nm) is fabricated with a 5nm thick doping section in the emission layer. The doping section is formed by co-deposition of CBP and Ir(btp)2acac with a doping concentration of 8%, and it's location(x) is changed from HTL/EML interface to EML/HBL in 5nm steps. The current efficiency versus current density of the devices are shown in Fig. 1. By changing the location of doping section, as shown in Fig. 1 and 2, at x=5nm, the efficiency shows the maximum of 3.1 cd/A at 0.5 mA/cm2 and it is slightly decreased when the section is closed to HTL and slightly increased when the section is closed to HBL. If the doping section is closed to HTL(NPB) the excitons can be quenched easily to NPB's triplet state energy level(2.5eV) which is relatively lower than that of CBP(2.6eV). Because there is a hole accumulation at EML/HBL interface the efficiency can be increased slightly when the section is closed to HBL. Even the thickness of the doping section is only 5nm,. the maximum efficiency of 3.1 cd/A with x=5 is closed to that of the homogeneously doped device, 3.3 cd/A, because the diffusion length of the excitons is relatively long. As a result, we confirm that the current efficiency of the PHOLED can be improved by the doping profile optimization such as partially, not homogeneously, doped EML structure.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.11
• /
• pp.689-695
• /
• 2016

The performance of proton exchange membrane fuel cells (PEMFC) is strongly related to the water flow and accumulation in the gas diffusion layer (GDL) and catalyst layer. Understanding the behavior of fluid from the characteristics of the media is crucial for the improvement of the performance and design of the GDL. In this paper, a numerical method is proposed to calculate the design parameters of the GDL, i.e., permeability, tortuosity, and effective diffusivity. The fluid flow in a channel filled with randomly packed hard spheres is simulated to validate the method. The flow simulation was performed by lattice Boltzmann method with bounce back condition for the solid volume fraction in the porous media, with different values of porosities. Permeability, which affects the flow, was calculated from the average pressure drop and the velocity in the porous media. Tortuosity, calculated by the ratio the average path length of the randomly injected massless particles to the thickness of the porous media, and the resultant effective diffusivity were in good agreement with the theoretical model. The suggested method can be used to calculate the parameters of real GDL accurately without any modification.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.575-578
• /
• 2004

The charging tendency of $Zn_2SiO_4:Mn^{2+}$ phosphor surface was modified in order to improve discharging characteristic of green cell in an ac-plasma display panel (ac-PDP). The Zinc-silicate ($Zn_2SiO_4:Mn^{2+}$) green-emitting phosphor was coated with magnesium oxide(MgO), which is viable to have positive charge on the surface. After fabricating the green cell with MgO-coated $Zn_2SiO_4:Mn^{2+}$, the electrical and optical properties in the cell were examined. It was found that the dynamic voltage margin could be increased while the address time was reduced. It may be ascribed to the change of charging tendency of $Zn_2SiO_4:Mn^{2+}$ phosphor by MgO coating, which makes it possible to stable wall-charge accumulation. When $Zn_2SiO_4:Mn^{2+}$ phosphor was coated with 1.3wt%-MgO, the address time was reduced 1.2 ${\mu}s$ and the address voltage lowered 25 V without any misfiring problem, compared to those of typical $Zn_2SiO_4:Mn^{2+}$ phosphor layer. The luminescence intensity of green cell using MgO-coated phosphor layer was also improved by 10%.

• Ocean and Polar Research
• /
• v.33 no.1
• /
• pp.35-43
• /
• 2011

Blubber plays different biological roles in cetaceans, including structural support, physiological demands (thermoregulation, streamlining, buoyancy, etc.), and energy storage. As such, biochemical composition, especially lipid, in the blubber may be vertically stratified in order to effectively assist with these functions. We analysed lipid content, class and fatty acid composition in the blubber of by-catch minke whale (Balaenoptera acutorostrata; n = 11), long-beaked common dolphin (Delphinus capensis; n = 3) and Pacific white-sided dolphin (Lagenorhynchus obiquidens; n = 2) from Korean waters. Lipid content for all three species ranged from 55 to 96% of wet weight, with a dominance of triacylglycerols. Vertical stratification of blubber lipid content was different between species. For minke whale and longbeaked common dolphin, it increased from inner (near the muscle) to outer (near the skin) layer, whereas it decreased for Pacific white-sided dolphin. Thirty-one fatty acids were found in all blubber samples and vertical stratification of fatty acid composition was similar among all three species. Among grouped fatty acids, monounsaturates were the most abundant, gradually increasing from inner to outer blubber layer, whereas polyunsaturates and saturates decreased. Such vertical stratification of lipid content and composition suggests that the modification and accumulation of lipid occur in the blubber itself in order to help cetaceans with their specific physiological needs.

• 한국해양학회지
• /
• v.30 no.4
• /
• pp.288-301
• /
• 1995

Rates of the sedimentation and particle mixing have been estimated by applying uranium-series disequilibrium techniques to three sediment cores collected from the korea Deep Ocean Study (KODOS) site between the clarion and Clipperton Fracture Zones (CCFZ) of the Equatorial Pacific. Sedimentation rates based on the profiles of excess /SUP 230/Th activity and /SUP 230/ Th/SUB xs//SUP 232/ Th activity ratios at the southeastern part of the study area were estimated to be in the order of a few millimeters per thousand year, while at the northwestern part a factor of ten lower. Excess activities of /SUP 230/Th and /SUP 230/Th ratios showed intervals of constant values in the upper part of the sediment cores, probably generated by biological particle mixing. A "two-box" advection-diffusion steady state mixing model was employed in order to estimate particle mixing rates in the upper and the lower layers, based on the distribution profiles of excess /SUP 210/Pb activities. Particle mixing coefficients were estimated to be in the order of 10$^1$ cm$^2$/y in the upper layer and 10/SUP -1/-10/SUP 0/ cm$^2$/y in the lower layer.

• Applied Microscopy
• /
• v.26 no.1
• /
• pp.79-93
• /
• 1996

The differentiation of nail matrix and fine structure of matrix cells were studied with light and electron microscope using specimens from nails of thumb finger in Korean fetuses 14 to 24 weeks old. Fetal nail matrix consisted of two horizontal layers, thicker ventral and thinner dorsal matrices, originating from invagination of epidermis in proximal nail field. Matrix being generally thicker in its distal region than the apex became gradually thickened with increase of the fetal age. Each matrix consisted of single layer of basal cells and multiple layers of squamous cells which are arranged close to and parallel to the central axis of the nail mairix. The process of keratinization of fetal nail matrix was noted to be occured concurrently in the ventral and dorsal matrices along the central axis of matrix toward distal and dorsal direction. Squamous cells became matured with accumulation of tonofilaments, increase of keratohyalin granules, discharge of membrane coating granules, and narrowing of intercellular spaces, thickening of plasma membrane and finally being transformed into horny cells of nail plate. Horny cells of nail plate filled with fibrous elements in the electron dense amorphous substance. These findings of keratinization process of fetal nail matrix appeared to be similar to those of keratinization in epidermis and inner root sheath of the hair. In the nail matrix, however, corresponding region to the keratogenous zone of growing hair follicle was not observed. Vacuolated squamous cells of nail matrix seen on light microscopy was considered to be artefactual product, but squamous cells with condensed small nuclei rarely found adjacent nail plate was considered to be one of the squamous cells with unknown function. Proximal end of nail plate was observed on dorsal surface of nail field distal to the proximal nail fold at 14 and 16 weeks old human embryos. Proximal prolongation of the proximal end of nail plate was occured with advancing fetal age and afterward 21 weeks nail plate invaded into nail matrix. Melanin granule containing cells and Merkel cells were present only on the basal layer of dorsal nail matirx.

• Korean Journal of Optics and Photonics
• /
• v.25 no.2
• /
• pp.95-101
• /
• 2014

When voltage is applied on the metal layer of a surface plasmon resonance (SPR) sensor, electric field excitation causes charge accumulation on the metal surface. This alters not only the optical properties of the metal but also the SPR angle. In this study we investigate this effectby performing experiments using solutions of various pH values, and we obtain the relation between total surface charge and SPR angle. The curves for the various pH conditions become coincident. We compare our results to those from an earlier space charge layer (SCL) model, and suggest a modified SCL model which explains our result well. This result will be useful in applications of SPR sensors, and in studying the optical properties of thin metal layers.

• Atmosphere
• /
• v.31 no.4
• /
• pp.421-431
• /
• 2021

The Yeongdong region is frequently vulnerable to heavy snowfall in winter in terms of societal and economical damages. By virtue of a lot of previous efforts, snowfall forecast has been significantly improved, but the performance of light snowfall forecast is still poor since it is very conducive to synoptic and mesoscale interactions, largely attributable to Taeback mountains and East Sea effects. An intensive observation has been made in cooperation with Gangwon Regional Meteorological Office and National Institute of Meteorological Studies in winter seasons since 2019. Two distinctive Cold Air Damming (CAD) events (14 February 2019 and 6 February 2020) were observed for two years when the snowfall forecast was wrong specifically in its location and timing. For two CAD events, lower-level temperature below 2 km ranged to lowest limit in comparisons to those of the previous 6-years (2014~2019) rawinsonde soundings, along with the stronger inversion strength (> 2.0℃) and thicker inversion depth (> 700 m). Further, the northwesterly was predominant within the CAD layer, whereas the weak easterly wind was exhibited above the CAD layer. For the CAD events, strong cold air accumulation along the east side of Taeback Mountains appeared to prevent snow cloud and convergence zone from penetrating into the Yeongdong region. We need to investigate the influence of CAD on snowfall in the Yeongdong region using continuous intensive observation and modeling studies altogether. In addition, the effect of synoptic and mesoscale interactions on snowfall, such as nighttime drainage wind and land breeze, should be also examined.