• 제목/요약/키워드: Accumulation Estimation

검색결과 173건 처리시간 0.029초

Biomass, Primary Nutrient and Carbon Stock in a Sub-Himalayan Forest of West Bengal, India

  • Shukla, Gopal;Chakravarty, Sumit
    • Journal of Forest and Environmental Science
    • /
    • 제34권1호
    • /
    • pp.12-23
    • /
    • 2018
  • Quantitative information on biomass and available nutrients are essential for developing sustainable forest management strategies to regulate atmospheric carbon. An attempt was made at Chilapatta Reserve Forest in Duars region of West Bengal to quantify its above and below ground carbon along with available "N", "P" and "K" in the soil. Stratified random nested quadrats were marked for soil, biomass and litter sampling. Indirect or non-destructive procedures were employed for biomass estimation. The amount of these available nutrients and organic carbon quantified in soil indicates that the forest soil is high in organic carbon and available "K" and medium in phosphorus and nitrogen. The biomass, soil carbon and total carbon (soil C+C in plant biomass) in the forest was 1,995.98, 75.83 and $973.65Mg\;ha^{-1}$. More than 90% of the carbon accumulated in the forest was contributed by the trees. The annual litter production of the forest was $5.37Mg\;ha^{-1}$. Carbon accumulation is intricately linked with site quality factors. The estimated biomass of $1,995.98Mg{\cdot}ha^{-1}$ clearly indicates this. The site quality factor i.e. tropical moist deciduous with optimum availability of soil nutrients, heavy precipitation, high mean monthly relative humidity and optimum temperature range supported luxuriant growth which was realized as higher biomass accumulation and hence higher carbon accumulated.

지형기후모형에 근거한 서리경보시스템 구축 (Site - Specific Frost Warning Based on Topoclimatic Estimation of Daily Minimum Temperature)

  • 정유란;서희철;윤진일
    • 한국농림기상학회지
    • /
    • 제6권3호
    • /
    • pp.164-169
    • /
    • 2004
  • A spatial interpolation scheme incorporating local geographic potential for cold air accumulation (TOPSIM) was used to test the feasibility of operational frost warning in Chatancheon basin in Yeoncheon County, where the introduction of new crops including temperate zone fruits is planned. Air temperature from April to June 2003 was measured at one-minute intervals at four locations within the basin. Cold-air accumulation potentials (CAP) at 4 sites were calculated for 3 different catchment scales: a rectangular area of 65 x 55 km which covers the whole county, the KOWACO (Korea Water Corporation) hydrologic unit which includes all 4 sites, and the sub-basins delineated by a stream network analysis of the digital elevation model. Daily minimum temperatures at 4 sites were calculated by interpolating the perfect prognosis (i.e., synoptic observations at KMA Dongducheon station) based on TOPSIM with 3 different CAPs. Mean error, mean absolute error, and root mean square error were calculated for 45 days with no precipitation to test the model performance. For the 3 flat locations, little difference was detected in model performance among 3 catchment areas, but the best performance was found with the CAPs calculated for sub-basins at one site (Oksan) on complex terrain. When TOPSIM loaded with sub-basin CAPs was applied to Oksan to predict frost events during the fruit flowering period in 2004, the goodness of fit was sufficient for making an operational frost warning system for mountainous areas.

반류수 처리를 위한 생물막 아질산화공정에서 유기물과 고형물 농도에 따른 온도 영향 평가 (The Evaluation of Temperature Effects on Biofilm Nitritation System with Various Organic and Solid Concentrations for High Strength Reject Water Treatment)

  • 이한샘;이상일;윤주환
    • 한국물환경학회지
    • /
    • 제27권6호
    • /
    • pp.769-775
    • /
    • 2011
  • An experimental study of biofilm nitritation system for high-strength ammonium wastewater has been carried out to examine the temperature effect on different organic and solid concentration. Operating temperature varied from $35^{\circ}C$ to $15^{\circ}C$. The influent N concentration of identical three reactors was adjusted to about $300mg\;NH_4-N/L$. A control unit fed with a synthetic wastewater, while the others were fed with reject water which is consisted of the supernatant of both digester and thickener. The results indicated that nitrite accumulation was stable in temperature range of $35^{\circ}C$ to $25^{\circ}C$. However, nitritation was significantly reduced at below $20^{\circ}C$. Free ammonia (FA) and free nitrous acid (FNA) were major inhibitors to the nitrite oxidizer for nitrite accumulation in lower temperature. From the estimation of temperature coefficient (${\Theta}$) of biofilm and suspended nitritation system, biofilm nitritation system could absorb the negative temperature effect compared with suspended nitritation system.

일반적 상황에서 2차원 절삭력 추정을 위한 이송모터 전류의 거동분석 (Analysis of the Characteristics of the Feed motor Current for the Estimation of the Cutting Force in General Cutting Environment)

  • 정영훈;윤승현;조동우
    • 한국정밀공학회지
    • /
    • 제19권4호
    • /
    • pp.93-100
    • /
    • 2002
  • The current from the feed motor of a machine tool contains substantial information about the machining state. There have been many researches that investigated the current as a measure for the cutting farces. However it has been reported that this indirect measurement of the cutting farces from the feed motor current is only feasible in low frequency. In this research, it was presented that the bandwidth of the current monitoring can be expanded to 130 Hz. And the unusual behavior of the current was examined in this bandwidth. The cross-feed directional cutting force influences the machined surface of the workpiece, which makes it necessary to estimate this force to control the roughness of the machined sulfate. The current exists in the stationary feed motor, and it can give the useful information on the quality of the machined surface. But the unpredictable behavior of the current prevents applying the current to prediction of the cutting state. Empirical approach was conducted to resolve the problem. As a result, the current was shown to be related to the accumulation of the accumulation of the infinitesimal rotation of the motor. rotation of the motor. Subsequently the relationship between the current and the cutting force was identified.

Performance-based wind design of tall buildings: concepts, frameworks, and opportunities

  • Bezabeh, Matiyas A.;Bitsuamlak, Girma T.;Tesfamariam, Solomon
    • Wind and Structures
    • /
    • 제31권2호
    • /
    • pp.103-142
    • /
    • 2020
  • One of the next frontiers in structural wind engineering is the design of tall buildings using performance-based approaches. Currently, tall buildings are being designed using provisions in the building codes and standards to meet an acceptable level of public safety and serviceability. However, recent studies in wind and earthquake engineering have highlighted the conceptual and practical limitations of the code-oriented design methods. Performance-based wind design (PBWD) is the logical extension of the current wind design approaches to overcome these limitations. Towards the development of PBWD, in this paper, we systematically review the advances made in this field, highlight the research gaps, and provide a basis for future research. Initially, the anatomy of the Wind Loading Chain is presented, in which emphasis was given to the early works of Alan G. Davenport. Next, the current state of practice to design tall buildings for wind load is presented, and its limitations are highlighted. Following this, we critically review the state of development of PBWD. Our review on PBWD covers the existing design frameworks and studies conducted on the nonlinear response of structures under wind loads. Thereafter, to provide a basis for future research, the nonlinear response of simple yielding systems under long-duration turbulent wind loads is studied in two phases. The first phase investigates the issue of damage accumulation in conventional structural systems characterized by elastic-plastic, bilinear, pinching, degrading, and deteriorating hysteretic models. The second phase introduces methods to develop new performance objectives for PBWD based on joint peak and residual deformation demands. In this context, the utility of multi-variate demand modeling using copulas and kernel density estimation techniques is presented. This paper also presents joined fragility curves based on the results of incremental dynamic analysis. Subsequently, the efficiency of tuned mass dampers and self-centering systems in controlling the accumulation of damage in wind-excited structural systems are investigated. The role and the need for explicit modeling of uncertainties in PBWD are also discussed with a case study example. Lastly, two unified PBWD frameworks are proposed by adapting and revisiting the Wind Loading Chain. This paper concludes with a summary and a proposal for future research.

2005년 7월 5일 폭우 사례 시 우적계 R-Z 관계식이 레이더 강우 추정에 미치는 영향 (Effect of R-Z Relationships Derived from Disdrometer Data on Radar Rainfall Estimation during the Heavy Rain Event on 5 July 2005)

  • 이규원;권병혁
    • 한국지구과학회지
    • /
    • 제33권7호
    • /
    • pp.596-607
    • /
    • 2012
  • R-Z 관계식은 레이더 강우추정의 정확도를 결정하는 중요한 요소이다. 본 연구에서는 캐나다 궤벡주의 셍레미에서 홍수를 야기한 폭우사례에서 관측된 우적계 및 레이더 자료를 이용하여 레이더 강우추정 시 우적계 자료에서 도출된 R-Z 관계식의 효과를 분석하였다. 이를 위하여 맥길 S-밴드 레이더에서 시간 분해능 2.5분과 공간 분해능 $1^{\circ}{\times}250m$로 관측된 레이더 반사도를 사용하였다. 레이더 반사도 자료에서는 폭우를 동반한 강우세포가 셍레미를 통과한 것으로 관측되었지만 우량계 관측망에서는 낮은 공간 분해능으로 인하여 이 세포가 관측되지 않았다. 셍레미에서 30분과 1시간 최대 누적 강우량은 각각 39 mm와 42 mm였다. 강우사례 동안 두 개의 우적계(POSS; Precipitation Occurrence Sensor System)가 사용되었다. 하나의 우적계는 레이더 반사도와 우적계 반사도를 비교하여 레이더 반사도를 보정하고 다른 우적계는 R-Z 관계식을 유도하는데 사용되었다. 기후학적 R-Z 관계식을 사용하였을 때 보다 반사도에 의존적인 우적계에서 유도된 관계식을 사용하였을 때 강우 추정 오차가 크게 줄었다. 일 누적 강우량에 대하여 편차는 +12%에서 -2%, 평균제곱근오차가 16%에서 10%로 줄었다. 우적계에서 도출된 R-Z 관계식으로 추정된 레이더 강우장을 이용하였을 때 홍수사례에 대하여 강우 발생 시간 및 강우량이 잘 일치하였다.

우리나라 공공건물의 내용연수 추정: RCC를 중심으로 (An Estimation on Average Service Life of Public Buildings in South Korea: In Case of RCC)

  • 권정훈;조진형;오현승;이세재
    • 산업경영시스템학회지
    • /
    • 제46권1호
    • /
    • pp.84-90
    • /
    • 2023
  • ASL estimation of public building is based on how appropriate the maximum age of the asset is derived based on the age record of the asset in the statistical data owned by public institutions. This is because we get a 'constrained' ASL by that number. And it is especially true because other studies have assumed that the building is an Iowa curve R3. Also, in this study, the survival rate is 1% as the threshold value at which the survival curve and the predictable life curve almost coincide. Rather than a theoretical basis, in the national statistical survey, the value of residual assets was recognized from the net value of 10% of the acquisition value when the average service life has elapsed, and 1% when doubling the average service life has elapsed. It is based on the setting mentioned above. The biggest constraint in fitting statistical data to the Iowa curve is that the maximum ASL is selected at R3 150%, and the 'constrained' ASL is calculated by the proportional expression on the assumption that the Iowa curve is followed. In like manner constraints were considered. First, the R3 disposal curve for the RCC(reinforced cement concrete) building was prepared according to the discarding method in the 2000 work, and it was jointly worked on with the National Statistical Office to secure the maximum amount of vintage data, but the lacking of sample size must be acknowledged. Even after that, the National Statistical Office and the Bank of Korea have been working on estimating the Iowa curve for each asset class in the I-O table. Another limitation is that the asset classification uses the broad classification of buildings as a subcategory. Second, if there were such assets with a lifespan of 115 years that were acquired in 1905 and disposed of in 2020, these discarded data would be omitted from this ASL calculation. Third, it is difficult to estimate the correct Iowa curve based on the stub-curve even if there is disposal data because Korea has a relatively shorter construction history, accumulated economic wealth since the 1980's. In other words, "constrained" ASL is an under-estimation of its ASL. Considering the fact that Korea was an economically developing country in the past and during rapid economic development, environmental factors such as asset accumulation and economic ability should be considered. Korea has a short period of accumulation of economic wealth, and the history of 'proper' architectures faithful to building regulations and principles is short and as a result, buildings 'not built properly' and 'proper' architectures are mixed. In this study, ASL of RCC public building was estimated at 70 years.

Carbon Sequestration of Teak (Tectona grandis Linn. f.) Plantations in the Bago Yoma Region of Myanmar

  • Oo, Thaung Naing;Lee, Don Koo;Combalicer, Marilyn
    • 한국산림과학회지
    • /
    • 제96권5호
    • /
    • pp.602-608
    • /
    • 2007
  • Forest plantations become important strategy not merely for the financial aspect, but for carbon sequestration and ecosystem stability. Forest plantations increase the density of the forest biomass, which reduce the increase in atmospheric carbon dioxide. Biomass density is also a useful variable for comparing structural and functional attributes of forest ecosystems across a wide range of environmental conditions. In this study, carbon sequestration of teak (Tectona grandis Linn. f.) in the individual tree and plantation levels estimation was carried out Site-specific allometric equation for the estimation of teak tree biomass was developed based on the direct measurement of fifteen (15) harvested trees in the Oak-twin Township of the Bago Yoma Region, Myanmar. A regression equation of the diameter at breast height (DBH) and the aboveground biomass (carbon content) was constructed to estimate the carbon storage level of plantations, which averaged 79 ton/ha. The average carbon accumulation in the soil (up to 30 cm in depth) was estimated 38.89 ton/ha, The highest mean annual increment (MAI) of total carbon was found in the 6-yr-old teak plantation (12.10 ton/ha/yr) whereas the lowest MAI was in the 26-yr-old teak plantation (4.31 ton/ha/yr).

인공환경 분포방식에 의한 보행거리 인지 변화에 대한 연구 - 대학 캠퍼스 내 보행로의 실제거리와 인지거리의 차이를 중심으로 - (The Distortion of Road Distance Perception by the Pattern of Object Distribution - Focused on the Distance Estimation in the Campus by Students -)

  • 서경욱
    • KIEAE Journal
    • /
    • 제14권4호
    • /
    • pp.91-96
    • /
    • 2014
  • The behavior of walking involves our action of seeing things. It is the intention of this research that the cognitive process of perceiving things along the path can affect the way we sense the length of the journey. The theory generally accepted in this line of thought is the 'feature accumulation theory'. It assumes that if the journey includes many objects or memorable features, then our memory recalls that journey much farther than it really was. This study set up a real-life experiment by asking university students about their mental memory of the two different routes in the campus. One is a longer path that has not much to look at except trees and the other a shorter path yet with many buildings, sign boards and street furnitures. The subjects processed their mental image in the brain based on their experience. They showed a strong tendency that the path with more features were remembered longer while that with less features shorter. More interestingly, it was found that as their experience increases, they become more accurate about the exact length of the questioned paths. The result corroborates the theory that human perception of space is based on the topological understanding of surroundings rather than geometric understanding.

FD-CD 트랜스코딩기법에서 CD에 의한 전파 왜곡의 적응적 예측 모델 (An Adaptive Estimation Model for Propagation Errors Incurred by CD in FD-CD Transcoding)

  • 김진수;김재곤
    • 한국멀티미디어학회논문지
    • /
    • 제7권11호
    • /
    • pp.1571-1579
    • /
    • 2004
  • 비디오를 다양한 단말과 이종의 망에 효과적으로 제공하기 위한 방법 중에, FD(Frame Dropping)-CD(Coefficient Dropping) 트랜스코딩 기법은 계산량을 줄이고, 손쉽게 구현할 수 있다는 측면에서 주목을 받고 있다. 그러나, FD-CD트랜스코딩 기법은 CD에 의한 왜곡이 GOP내의 부호화 의존성을 갖는 프레임의 복호화 영상 품질에 많은 영향을 미친다. 본 논문에서는, CD로 인하여 각 프레임별로 전파되는 왜곡의 크기를 적응적으로 예측하는 모델링 기법을 제안한다. 제안된 기법은 각 프레임별로 부호화된 매크로블록의 부호화 모드 비율에 대해 적응적으로 구해진다. 모의실험을 통하여, 제안된 모델은 CD로 인해 초래되는 전체 왜곡크기를 잘 예측할 수 있음을 보이고, 또한, 부호화된 비트스트림에서 CD에 의해 초래되는 프레임 단위로 일정한 전체 왜곡을 삽입하는데 효과적임을 보인다.

  • PDF