• Nuclear Engineering and Technology
• /
• v.48 no.3
• /
• pp.751-757
• /
• 2016

The present work discusses two different models of boiling water reactor (BWR) bundle to compare the neutronic characteristics of uranium dioxide ($UO_2$) and uranium zirconium hydride ($UZrH_{1.6}$) fuel. Each bundle consists of four assemblies. The BWR assembly fueled with $UO_2$ contains $8{\times}8$ fuel rods while that fueled with $UZrH_{1.6}$ contains $9{\times}9$ fuel rods. The Monte Carlo N-Particle Transport code, based on the Mont Carlo method, is used to design three dimensional models for BWR fuel bundles at typical operating temperatures and pressure conditions. These models are used to determine the multiplication factor, pin-by-pin power distribution, axial power distribution, thermal neutron flux distribution, and axial thermal neutron flux. The moderator and coolant (water) are permitted to boil within the BWR core forming steam bubbles, so it is important to calculate the reactivity effect of voiding at different values. It is found that the hydride fuel bundle design can be simplified by eliminating water rods and replacing the control blade with control rods. $UZrH_{1.6}$ fuel improves the performance of the BWR in different ways such as increasing the energy extracted per fuel assembly, reducing the uranium ore, and reducing the plutonium accumulated in the BWR through burnup.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.4 no.3 s.14
• /
• pp.83-87
• /
• 2004

In underground culvert are established main and basic facilities for electric power, communication, gas and heating pipe etc. In the future the use of underground culvert will be enlarged and the peril of fire will be increased. Thus it is necessary to make a general plan to prevent fire. The skills to prevent fire in underground culvert will be accumulated by the spray distribution of the nozzle and domestic skills in fire fighting will be upgraded. It will also contribute to the construction of common small fire fighting system suitable to the domestic surrounding and the growth of domestic skills for fire fighting and disaster prevention.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2006.05a
• /
• pp.365-369
• /
• 2006

It is concentrated on a methodology to establish a scheme of investment on power distribution systems of components. This paper provides a methodology to estimate the scheme as using a customer interruption cost regarding reliability indices in power distribution systems. The proposed method basically uses the failure rate depending on time for explaining the deterioration of a component. Therefore, the theory of the sensitivity is used for deciding the precedence of the investment to consider an effect of each component's failure rate on the system reliability. After Estimating the sensitivity on component investment cost making incremental reliability level is produced by component's investment cost accumulated according to the precedence of the sensitivity. After that, the failure rate corresponding with reliability level on the curve of investment cost is used as producing the curve of customer interruption cost. Two curves have the crossing point that is proposed to acceptable reliability level for customer and utility. In this paper, the acceptable reliability level for customer with the utility is assessed to analyze customer interruption cost and sensitivity of reliability indices. In conclusion the result of investment based on this method is shown to the reliability level with two cost.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.114-114
• /
• 2020

Water contamination in a water distribution network (WDN) is harmful since it directly induces the consumer's health problem and suspends water service in a wide area. Actions need to be taken rapidly to countermeasure a contamination event. A contaminant source ident ification (CSI) is an important initial step to mitigate the harmful event. Here, a CSI approach focused on determining the contaminant intrusion possible location and time (PLoT) is introduced. One of the methods to discover the PLoT is an inverse calculation to connect all the paths leading to the report specification of a sensor. A filtering procedure is then applied to narrow down the PLoT using the results from individual sensors. First, we spatially reduce the suspect intrusion points by locating the highly suspicious nodes that have similar intrusion time. Then, we narrow the possible intrusion time by matching the suspicious intrusion time to the reported information. Finally, a likelihood-score is estimated for each suspect. Another important aspect that needs to be considered in CSI is that there are inherent uncertainties, such as the variations in user demand and inaccuracy of sensor data. The uncertainties can lead to overlooking the real intrusion point and time. To reflect the uncertainties in the CSI process, the Monte-Carlo Simulation (MCS) is conducted to explore the ranges of PLoT. By analyzing all the accumulated scores through the random sets, a spread of contaminant intrusion PLoT can then be identified in the network.

• Transactions of Materials Processing
• /
• v.32 no.1
• /
• pp.35-40
• /
• 2023

In the case of a wire with a very fine diameter during the multi-stage drawing process, the heterogeneity of the deformation in the radial direction tends to develop strongly as the amount of deformation is accumulated. It is known that the heterogeneity of deformation in the radial direction of the wire is closely related to the process parameters during the multi-stage drawing process. In this study, finite element analysis (FEA) was used to theoretically examine the effect of friction between the surface of the wire and the drawing die during the multi-stage drawing process of Cu-0.2wt%Mg alloy on the deformation heterogeneity developed in the radial direction of the wire. The distribution of effective strain, radial strain, circumferential strain, and shear strain developed in the radial direction of the wire during the multi-stage drawing process was analyzed while changing the friction coefficient, and the results were analyzed and compared for each path and position. The FEA results revealed that the shear strain developed in the radial direction of the wire during the multi-stage drawing process of Cu-0.2wt%Mg alloy showed the most non-uniform distribution and was also severely affected by the friction coefficient.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.1
• /
• pp.85-94
• /
• 2014

Tolerance accumulation has serious effect on the performance of an assembled body. This paper proposes the method which analyzes tolerance accumulation using Monte Carlo Simulation. This method can predict tolerance distribution of fully assembled body using the dimensional tolerance distribution of each part to be assembled. In this analysis, it is assumed that the tolerance of each part has the nominal distribution or uniform distribution. This analysis method is applied to ECV(External Control Valve), and the accumulated tolerance of the fully assembled ECV is obtained from the analysis. The results show that initial tolerance given to each part do not meet the design requirement of ECV. Hence, the tolerances of each part are modified and the additional analysis with the modified tolerances yields the results which satisfy the design requirements of ECV.

• Structural Engineering and Mechanics
• /
• v.76 no.3
• /
• pp.279-291
• /
• 2020

The seismic design of conventional frame structures is meant to enhance plastic deformations at beam ends and prevent yielding in columns. To this end, columns are made stronger than beams. Yet yielding in columns cannot be avoided with the column-to-beam strength ratios (about 1.3) prescribed by seismic codes. Preventing plastic deformations in columns calls for ratios close to 4, which is not feasible for economic reasons. Furthermore, material properties and the rearrangement of geometric shapes inevitably make the distribution of damage among stories uneven. Damage in the i-th story can be characterized as the accumulated plastic strain energy (W_pi) normalized by the product of the story shear force (Q_yi) and drift (δ_yi) at yielding. Past studies showed that the distribution of the plastic strain energy dissipation demand, W_pi/ΣW_pj, can be evaluated from the deviation of Q_yi with respect to an "optimum value" that would make the ratio W_pi/(Q_yiδ_yi) -i.e. the damage- equal in all stories. This paper investigates how the soil type and ductility demand affect the optimum lateral strength distribution. New optimum lateral strength distributions are put forth and compared with others proposed in the literature.

• Journal of Environmental Impact Assessment
• /
• v.11 no.4
• /
• pp.247-258
• /
• 2002

This study aimed at verifying the grain-sized distribution of surface deposits in a tidal flat using multi-spectral Landsat TM. In this study, we employed the grain-sized analysis, PCA and unsupervised classification techniques for analyzing the distribution of deposits. As a result in this study, the unsupervised classification method using PCA image was found to be most useful in classifying tidal flat deposits using satellite data. This method is considerably effective in analyzing not only the aspects of distribution in terms of accumulated deposits and erosion, but also the changes in seaside topography and shoreline. The grain-sized distribution analysis indicates that the mud flat inside the Cheonsu-bay tidal flat is distributed, the mixed flat located in the middle, and the sand flat distributed near the sea. The sand flat is dominant around the southern part of Seomot isle and its beach. On the other hand, the mud and mixed flat is dominant on the western part. Likewise, the western coast of Seomot isle and its beach is significantly affected by waves facing the offshore. However, the eastern side of the bay could be a site for the evolution of tidal flat made of fine materials where it is less affected by ocean waves. These results show that multi-spectral satellite data are effective for the classification of distribution materials and environmental impact assessment and continuous monitoring. In particular, the research on environmental deposits can provide important decision-supporting information for decision-making on seaside development, by analyzing the progress of deposits and environmental changes.

• Journal of Korean Society on Water Environment
• /
• v.39 no.4
• /
• pp.329-342
• /
• 2023

Turbid water and suspended sediment (SS) load are having negative consequences such as water quality degradation and ecological damage, thus necessitating the establishment of management guidelines to reduce their impact. The present work investigates the spatio-temporal distribution of fish species and the effects of turbid water from 2011-2016 in the upper reaches of Soyang-Dam. The family Cyprinidae is the largest population in the study area, among which Zacco platypus and Zacco koreanus are the dominant species. The diversity of species is relatively abundant in the upper watershed, while the seasonal effect on the population distribution remains unclear. Using two main common components of the empirical orthogonal function (EOF) analysis, the distribution characteristics of 27 species at five survey sites are revealed. Zacco koreanus is found to be predominant at the upstream A-Naerincheon, while Zacco platypus and Rhinogobius brunneus are found to be predominant at the upstream B-Bukcheon. Disturbance of an aquatic ecosystem has a relatively greater impact in the downstream, as-compared to the upper area-the high proportion of forest area is decreased whereas that of agricultural and urbanized areas is increased. The patterns of representative species are changed according to the mid- to long-term effects of turbid water and SS. Accordingly, the significant correlation between the SS load and fish distribution EOF analysis indicates that it should be considered as a potential alternative that can overcome the limitations of impact assessment on turbid water to the Fish Assessment Index (FAI). A comprehensive study examining the long-term effects of SS load to the fish ecosystems with a systematic statistical analysis of sufficiently accumulated data at the national level is needed as future research.

• Journal of the Korean association of regional geographers
• /
• v.7 no.1
• /
• pp.97-106
• /
• 2001

There are a few interesting areas which show freezing during summer season in Korea, three of them are especially important. They are located at Milyang(Gyungnam province), Uisung and Chungsong(Gyungbook province). They are named Eoleumgol(ice-valley) or Binghyul(ice-cave). The purpose of this study is to clarify geomorphological and geological characteristics about the distribution areas of freezing during summer season in Korea in relation to previous works, which have been studied in hydrological or micro-climatological viewpoints. The main results are summarized as follows. 1) The main geomorphological and geological characteristics in the distribution areas of freezing during summer season (1) Thick debris accumulated slope within deep valley (2) North facing slope (3) The component debris of volcanic rock such as andesite or rhyolite 2) The ice-cave as a system that give rise to freezing phenomenon in summer season is closely related to talus slope. The ice-cave has thick accumulated debris and lots of vacant spaces within the rock deposits, some of vacant spaces are very big and connected with underground water system. 3) A partly freezing within underground water system is required freezing phenomenon in summer season. Judging from this point of view, two ideas are suggested; one is the evaporation theory, another is that the frozen condition in winter remains untill late summer.