• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.31 no.5
• /
• pp.320-333
• /
• 2019

In this study, a physics-based 3D morphology model for the estimation of an erosion rate of nourished beach is newly proposed. As a hydrodynamic module, IHFOAM toolbox having its roots on the OpenFoam is used. On the other hand, the morphology model comprised a transport equation for suspended sediment, and Exner type equation derived from the viewpoint of sediment budget with the bed load being taken to accounted. In doing so, the incipient motion of sediment is determined based on the Shields Diagram, while the bottom suspended sediment concentration, the bed load transport rate is figured out using the bottom shearing stress directly calculated from the numerically simulated flow field rather than the conventional quadratic law and frictional coefficient. In order to verify the proposed morphology model, we numerically simulate the nonlinear shoaling, breaking over the uniform beach of 1/m slope, and its ensuing morphology change. Numerical results show that the partially skewed, and asymmetric bottom shearing stresses can be successfully simulated. It was shown that sediments suspended and eroded at the foreshore by wave breaking are gradually drifted toward a shore and accumulated in the process of up-rush, which eventually leads to the formation of swash bar. It is also worth mentioning that the breaker bar formed by the sediments dragged by the back-wash flow which commences at the pinnacle of up-rush as the back-wash flow gets weakened due to the increased depth was successfully duplicated in the numerical simulation.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.23 no.2
• /
• pp.89-99
• /
• 2021

This study was carried out to understand how factors of decomposition such as quality of the substrate (tree species), forest types, and soil·meteorological conditions affect decomposition rates and dynamics of carbon (C) and nitrogen (N) of branches in adjacent Pinus densiflora and Quercus variabilis stands in Sancheong and J inju in Southern Korea. The branch bags (30 cm × 30 cm) with branch samples (a diameter of 2.0 - 4.0 cm and length of 10 cm) were placed on the forest floor at each stand in May 2018. The branch bags were collected in August and November 2018, February and May 2019, respectively. The decomposition rates of branches in P. densiflora stands were 4.49 % for Sancheong, and 5.75 % for Jinju. Whereas, the decomposition rates in Q. variabilis were 20.01 % for Sancheong, and 24.68 % for Jinju, respectively. The decomposition of branches was more rapid in Q. variabilis compared with P. densiflora in both regions. C and N in decomposed branches were more mineralized in Q. variabilis, whereas C and N were more accumulated in P. densiflora. These results indicated that the decomposition rates, C and N of decomposed branches may be affected by differences in substrate quality such as initial N concentration and C/N ratio rather than differences between both regions including different environmental factors.

• Korean Journal of Environmental Agriculture
• /
• v.34 no.2
• /
• pp.91-97
• /
• 2015

BACKGROUND: Earthworms are essential detritus feeders that play a vital role in the process of decomposition of organic matter and soil metabolism. The complex process of partial breakdown of organic matter and mixing with mucous and gut microbial flora in the form of earthworm cast results in the reduction of the toxicity. This study focused on the change of cast amount and pollutant contents before and after the eating of the organic waste and upland soil with the two species of earthworm. METHODS AND RESULTS: The two species of earthworms were compared to the cast production. In the upland soil material, the daily amount of worm's cast was 1.42 g in E. andrei and 0.40 g in A. agrestis. In the organic waste material, the cast of E. andrei was 0.78~0.83 g and the cast of A. agrestis. have not been collected because all earthworms died after the treatment. The heavy metals treated in the upland soil were evaluated the impact of the worm excretion. With the E. andrei, the cast production was decreased 0.1~0.8 times in zinc, 0.2~0.5 times in copper, and 0.1~0.7 times in cadmium compared to the control treatment according to the levels of concentration. With A. agrestis, the cast amount was decreased 0.3~1.1 times in zinc, 0.2~0.3 times in copper, and 0.1~2.1 times in cadmium, respectively. The changes of pollutant contents before and after the eating of the organic wastes with E. andrei were studied. In the treatment of the Alcohol Fermentation Processing Sludge and the Fruit Juice Processing Sludge, heavy metal content of the cast was increased 0.7~53.3% compared to the sludge materials. PAHs contents were decreased 50.1% in the cast of the Alcohol Fermentation Processing Sludge and 36.6% in the cast of the Fruit Juice Processing Sludge, respectively. CONCLUSION: In conclusion, although the A. agrestis was bigger than E. andrei in size and weight, the cast amount of A. agrestis was small. The two species of earthworm was less excretion with high concentration of heavy metals. While the heavy metals such as zinc, copper, and cadmium were considerably accumulated in the cast, the total compounds, PAHs were fairly decomposed. There results would provide us for restoring contaminated soil and cleaning organic wastes.

• Korean Chemical Engineering Research
• /
• v.56 no.4
• /
• pp.479-495
• /
• 2018

This study was carried out to research the multimedia fate modeling, concentration distribution and impact assessment of polycyclic aromatic hydrocarbons (PAHs) emitted from automobiles, which are known as carcinogenic and mutation chemicals. The amount of emissions of PAHs was determined based on the census data of automobiles at a target S-city and emission factors of PAHs, where multimedia fugacity modeling was conducted by the restriction of PAHs transfer between air-soil at the impervious area. PAHs' Concentrations and their distributions at several environmental media were predicted by multimedia fugacity model (level III). The residual amounts and the distributions of PAHs through mass transfer of PAHs between environment media were used to assess the health risk of PAHs at unsteady state (level IV), where the sensitivity analyses of the model parameter of each variable were conducted based on Monte Carlo simulation. The experimental result at S-city showed that Fluoranthene among PAHs substances are the highest residual concentrations (60%, 53%, 32% and 34%) at all mediums (atmospheric, water, soil, sediment), respectively, where most of the PAHs were highly accumulated in the sediment media (more than 80%). A result of PAHs concentration changes in S-city over the past 34 years identified that PAHs emissions from all environmental media increased from 1983 to 2005 and decreased until 2016, where the emission of heavy-duty vehicle including truck revealed the largest contribution to the automotive emissions of PAHs at all environment media. The PAHs concentrations in soil and water for the last 34 years showed the less value than the legal standards of PAHs, but the PAHs in air exceeded the air quality standards from 1996 to 2016. The result of this study is expected to contribute the effective management and monitoring of toxic chemicals of PAHs at various environment media of Metropolitan city.

• Microbiology and Biotechnology Letters
• /
• v.26 no.6
• /
• pp.537-544
• /
• 1998

The cultivation conditions of transformant Alcaligenes eutrophus AER5 harboring cloned phbC gene for mass production of poly (3-hydroxybutyrate-3-hydroxyvalerate)[P(3HB-3HV)] containing high molar fraction of 3-hydroxyvalerate (3-HV) were investigated. In two-stage batch cultivation, transformant accumulated P(3HB-3HV) containing 52.2 mol% of 3HV compared to 30 mol% of parent strain A. eutrophus H16. The increased 3-HV molar fraction was due to the amplified activity of PHB synthase participating in condensation of 3-HB and 3-HV. To increase efficiency of P(3HB-3HV) accumulation, fructose was added along with precursor compound valerate, and total cell mass and P(3HB-3HV) concentrations remarkably increased, but not 3-HV molar fraction. The effect of magnesium ion showed that P(3HB-3HV) concentration and 3-HV molar fraction were significantly increased upto 6.1 g/L and 71.3 mol% at 0.01 g/L of MgSO$_4$, respectively. The efficiency of several pH adjuster, NaOH, NaOH and (NH$_4$)$_2$SO$_4$, and NH$_4$OH, on total cell mass, p(3HB-3HV) concentration, and 3-HV molar fraction was also compared. To overcome the disadvantage of two-stage cultivation, one-stage intermittent fed-batch cultivation was attempted, such a way 10.0 g/L of fructose was supplied for cell growth at initial 36 hr and then 10.0 g/L of valerate and 5.0 g/L of fructose were applied to induce the accumulation of P(3HB-3HV), consequently, 10.4 g/L of P(3HB-3HV) with 38 mol% of 3-HV fraction could be obtained after 72 hr. These results can be used for elucidating cultivation strategy for mass production of P(3HB-3HV) containing high 3-HV molar fraction using transformant A. eutrophus AER5 harboring cloned phbC gene.

• Restorative Dentistry and Endodontics
• /
• v.25 no.4
• /
• pp.561-574
• /
• 2000

Poly-P has been used to prevent decomposition of foods and has been shown to have inhibitory effect on the growth of gram positive bacteria. The purpose of this study was to evaluate the effect of poly-P on the growth of Porphyromonas endodontalis, a gram negative obligate anaerobic rod, endodontopathic bacterium. P. endodontalis ATCC 35406 was in BHI broth containing hemin and vitamin K with or without poly-P. Inhibitory effect of each poly-P which was added at the beginning(lag phase) or during(exponential phase) the culture, MIC(minimum inhibitory concentration) was determined by measuring the optical density of the bacterial cell at 540nm. Viable cell counts were measured to determined whether poly-P has a bactericidal effect. Leakage of intracellular nucleotides from P. endodontalis was determined at 260nm and morphological change of P. endodontalis was observed under the TEM(transmission electron microscope). Binding of 32P-labeled poly-P to P. endodontalis was examined. SDS-polyacrylamide gel electrophoresis and zymography were performed to observe the changes in protein and enzyme profiles of P. endodontalis, respectively. The results from this study were as follows : 1. The minimal inhibitory concentration(MIC) of poly-P to P. endodontalis appeared to be 0.04~0.05%. 2. Poly-P added to the P. endodontalis culture during the exponential phase of P. endodontalis was as much effective as poly-P added at the begining of the culture, suggesting that the antibacterial effect of poly-P is not much dependent on the initial inoculum size of P. endodontalis. 3. Poly-P are bactericidal to P. endodontalis, demonstrating the decrease of the viable cell counts. 4. Intracellular nucleotide release from the P. endodontalis, was not increased in the presence of poly-P and was not reversed by the addition of divalent cations like $Ca^{2+}$ and $Mg^{2-}$. 5. Under the TEM, it was observed that fine electro-dense materials were prominent in the poly-P grown P. endodontalis, appearing locally in the cell, and the materials were more abundant and more dispersed in the cell as the incubation time with poly-P increased. In addition, highly electron dense granules accumulated in many poly-P grown cells, most of which were atypical in their shape. 6. Binding of 32P-labeled poly-P to P. endodontalis appeared to be 32.8 and 45.5 and 53.4% at 30 minutes, 1 hours and 2 hours, respectively. 7. In the presence of poly-P. the synthesis of proteins with apparent molecular masses of 25, 27, 35, 45 was lost or drastically decreased whereas expression of a protein with an apparent molecular mass of 75 was elevated. 8. Proteolytic activity of P. endodontalis was decreased by poly-P. The overall results suggest that use of poly-P may affect the growth of P. endodontalis, and the anti-bacterial activity of poly-P seems largely bactericidal. Changes in shape, protein expression, and proteolytic activity of P. endodontalis by poly-P may be directly and indirectly attributed to the antibacterial effect of poly-P. Further studies will be needed to confirm the effect of poly-P.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.6 no.1
• /
• pp.38-48
• /
• 2004

Tropospheric ozone data in Korea for 1998-2002 were analyzed to assess the impact on vegetation. SUM06(sum of hourly concentrations at or above 0.06 ppm) and AOT40(accumulated exposure over a threshold of 40 ppb), widely used as ozone indices in the U.S. and Europe, were calculated based on hourly ozone concentration in 612 areas during 1998-2002 in Korea. SUM06 of the highest 30 areas were 5-12 ppm/hr which were almost the same levels of the U.S. average, and a crop loss of 5% would be expected. Ozone pollution in Seoul during 1998-2002 had decreased compared to that for 1990-97 except in the Northern area; however, ozone pollution in Kyunggi during 1998-2002 had been increased twice compare to the previous 5 years. Korea was divided into four regions: Seoul Metropolitan area, Jungbu, Honam, and Youngnam. Ozone pollution in the Seoul Metropolitan area was much higher during 1998-2000 than the other areas, but ozone pollution during 2001-2002 was almost the same in all four regions. Chunnam-Kwangyang na Kyungbuk-Gumi, famous industrial complexes in southern Korea, were significant ozone pollution areas. However, other industrial complexes, such as Incheon, Ulsan, and Kyunggi-Sihwa, were not polluted compared to their neighbors. Comparing all ozone indices, SUM06(yr), SUM06(3mon), AOT40(yr), AOT40(3mon), number of hours exceeding 100 ppb, 95 percentile, 99 percentile, and maximum concentration, it was determined reasonable to use SUM06(3mon), AOT40(3mon) and number of hours exceeding 100 ppb for evaluation of the chronic impact of ozone on vegetation.

• Korean Journal of Environmental Agriculture
• /
• v.17 no.1
• /
• pp.48-53
• /
• 1998

The purpose of this study was to compare heavy metal concentrations in uncontaminated soil with those in soil influenced by industrial activities, and to investigate the relationship between change of heavy metal content and the kind of industry at the Iksan 1st Industrial Complex that has started since 1975. Soils sampled in 0-3㎝ and 3-6㎝ soil depth, respectively were analized for content of Cd, Cu, Ni, Pb and Zn. Change of heavy metal content in soil of the industrial complex were more accumulated 16 to 25% of Cd and Cu, 93% of Pb and Zn, respectively in samples compared with natural soil uncontaminated. But there was no different in Ni content between two soil. Distribution of Cd in soil layer of 0 to 3cm was the highest concentration of 5 ppm more at the textile industries, and then higher at the chemicals and the food processing industries. In 3 to 6㎝ soil layer Cd content was the highest concentration of 5 ppm more at the metal processing industries, and then higher at the textile industries. Cd accumulation in soil was different according to a kind of industry and soil depth. Cu content was the highest value of 400 ppm more in soil layer of 0 to 3cm at the manufacturing electric wires industry area and showed the accumulation phenomenon in soil layer 3 to 6cm at the ohmmeter, machines and electric wires industry area. Ni content was 35 ppm more in soil of the metal plating and processing industries regardless of soil sampling layer. Then it was 25 ppm more in soil of the building stones and semiconductor industries. Pb content was from 400 to 1000 ppm in soil of the chemicals and textiles industries regardless of soil sampling layer. Zn content was 1200 ppm more in soil of the chemicals and silk fabrics industries regardless of soil depth, and then lower in order to soil of leather processing${\le}$metal plating industries. In conclusion, changes of heavy metal kinds and content in soil of this industrial complex area were caused by the type or kinds of industrial activities. Changes of Pb and Zn content in soil were dominated at this area.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.6 no.3
• /
• pp.157-163
• /
• 1986

Synthesis and accumulation pattern of Weender components in orchardgrass (Dactylis glomerata L.) cv. Potomac and Baraula, perennial ryegrass (Lolium perenne L.) cv. Reveille and Semperweide and meadow fescue (Festuca pratensis Huds.) cv. Cosmos 11 and N.F.G. were studied under different growth environments and cutting managements. The field experiments were conducted as a split plot design with three cutting regimes of 6-7 cuts at grazing stage, 4-5 cuts at silage and 3 cuts at hay stage from 1975 to 1979 in Korea and West Germany. The results obtained are summarized as follows: 1. Air temperature, rainfalls and solar radiation were found to be an important meteorological factors influenced to synthesis and accumulation of Weender components. Under high temperature and strong solar radiation during summer season in Korea, accumulation of crude fiber and cell-wall constituents (NDF) in the plants, as average of all grass species and cutting regimes, were increased to about 30.1% and 48.7% from 27,9% and 42.9% in spring, respectively, while total nonstructural carbohydrates (TNC) were decreased to 1.52% in summer from 4.01% in spring. In West Germany, the concentration of Weeder components showed little seasonal variation. 2. Crude fiber and neutral detergent fiber (NDF) were shown higher concentration in orchardgrass than those of perennial ryegrass and meadow fescue, but N-free extractions and TNC as well as net energy value were less accumulated in orchardgrass. Orchardgrass contained lower net energy contents with 534 StE. 431 StE and 575 StE/kg for Suweon, Cheju and Freising, respectively, as compared with 624 StE (Suweon), 491 StE (Cheju) and 657 StE/kg (Freising) in meadow fescue.

• Korean Journal of Environmental Agriculture
• /
• v.24 no.3
• /
• pp.253-260
• /
• 2005

Salt accumulation in the plastic film house soils under continuous cultivation condition causes problems such as salt damages to plants, nitrate accumulation in vegetables, groundwater contamination, etc. due to excess application of fertilizers. Objective of this research was to find an optimum adsorbent to reduce salt concentration in the soil solution of plastic film house soils, where crop injuries have been observed due to the salt accumulation. The soils were significantly high in available P $(1,431{\sim}6,516mg\;kg^{-1}),\;NO_3-N\;(117.60{\sim}395.73mg\;kg^{-1})$, exchangeable Ca $(4.06{\sim}11.07\;cmol_c\;kg^{-1})$ and Mg $(2.59{\sim}18.76\;cmol_c\;kg^{-1})$, as compared to those of the average upland soils in Korea. Soils were treated with each of adsorbent such as ion-exchange resin, zeolite, rice bran, etc. at 2% level and prepared into saturated-paste samples. After equilibrium, soil solution was vacuum-extracted from the soil and measured for changes of the pH, EC, and concentrations of $Ca^{2+},\;Mg^{2+},\;K^+,\;Na^+,\;{NH_4}^+,\;{PO_4}^{3-}\;and\;{NO_3}^-$. Rice bran effectively removed ${PO_4}^{3-}\;and\;{NO_3}^-$ in the soil solution up to 100%. Efficiency was decreased in the orders of rice bran > ion-exchange resin > zeolite. Removal efficiencies of zeolite and ion-exchange resin for $Ca^{2+}$ were ranged from 1 to 65% and from 7 to 61%, respectively. Ion-exchange resin was also effective for removing $Mg^{2+},\;K^+,\;Na^+,\;and\;{NH_4}^+$. Overall results demonstrated that rice bran and ion-exchange resin could be applicable for salt accumulated soil to remove the respective anion and cation.