• Journal of Korean Clinical Nursing Research
• /
• v.26 no.2
• /
• pp.240-253
• /
• 2020

Purpose: This study was conducted to provide basic data for the systematization of 13 areas related to Advanced Practice Nurses (APN). Methods: The three-phase study was conducted as follows. 1) review of APN system and curriculum, 2) Focus Group Interviews (FGI) with 9 APNs, 6 physicians, and 3 nursing professors on the APN system, 3) analysis of clinical practice of the 13 APN areas, and of the accreditation and certification system for APNs, medical board, and medical subspecialty board. Based on the above data, a systematic plan was drawn. Results: The 13 APN areas could be divided into 7 groups based on a review of the APN system and curriculum for the 13 areas. Analysis based on clinical practice showed that the 13 APN areas could be divided into 4 groups. Two themes and seven categories emerged in FGI. The two themes were 1) 13 APN areas that need to be discussed, 2) improving the curriculum for APN. Considering these themes from FGI and the system of the medical subspecialty board, results could be integrated into 2 groups - clinical area and non-clinical area. Conclusion: The 13 APN areas need to be integrated in order to activate the APN system. For that, further discussions on improvements and a standard curriculum according to legislation related to APN should be carried out.

• Journal of IKEEE
• /
• v.21 no.3
• /
• pp.248-251
• /
• 2017

In this paper, The proposed board is developed by EMI compliant Dash Camera with $360^{\circ}$ omni angle. The proposed board is designed by designing DM and CM input noise reduction circuit and applying active EMI filter coupling circuit. The DM and CM input noise reduction circuit design uses a differential op amp circuit to obtain the DM noise coupled to the input signal via the parasitic capacitance(CP). In order to simplify the circuit by applying the active EMI filter coupling circuit, a noise separator is installed to compensate the noise of the EMI source to compensate the CM and DM active filter simultaneously. In order to evaluate the performance of the board for the proposed EMI response, an authorized accreditation body has confirmed that the electromagnetic certification standard for each frequency band is satisfied.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.10
• /
• pp.1020-1027
• /
• 2014

ISO 26262 is applied to vehicle and electrical/electronic component manufacturers for minimizing car accidents and life damage by the extended use of electronic control equipments and their malfunctions. In this standard, safety requirements are required to be applied from the early stage of development upto manufacture and disposal stages throughout the total lifecycle of the full vehicular system, and electromagnetic compatibility must be also managed as an important consideration factor. Therefore, it is nowadays very necessary to research and develop EFS(EMC for Functional Safety) to be applied in each stage of the design, manufacture, accreditation, use, maintenance stages of cars. In this paper, how EFS can be applied for the application of ISO 26262 is described. By the enforcement of this suggestions into the legal requirement or New Car Assessment Program(NCAP) test items, it is necessary that car manufacturer have to perform some procedures for ensuring car safety by themselves.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.38 no.4
• /
• pp.1-10
• /
• 2015

ISO 9001, quality management system, is widely known as advancing internal efficiency and productivity in various industry. As a result, the number of companies that have adopted ISO 9001's certification have been increasing continuously year by year since ISO 9000' family standard was published in 1987s. This fact shows that a lot of businesses are trying to get the accreditation for improving the competitiveness of quality. The purpose of this study is to present that ISO 9001's certification motives affect to the requirement's implementation and show that the execution of requirements influences on management performance in the small manufacturer. In order to carry out this research, we obtained 96 survey sheets and inspected twenty assumptions based on the reliability, validity of the questionnaires. The results of regression analysis are summarized as follows; First, the factors of certification motive influence on the requirement's implementation except resources management. Second, the two elements of ISO 9001 requirement, resources management and product realization, have an important effect on the operational performance and financial performance considerably in the companies that choose the internal motive. Finally, the two requisites of ISO 9001 requirement, resources management and measurement, analysis and improvement, affect to the operational performance and financial performance significantly in the businesses that select the external motive. Based on the results, the companies that choose the internal motive have a good performance to execute the ISO 9001 requirements. Also, to implement the requirements of ISO 9001 is helpful for the companies to produce the operational and financial performance.

• The Journal of the Korea Contents Association
• /
• v.19 no.1
• /
• pp.385-395
• /
• 2019

The purpose of this study was to compare the perception of medical institution certification evaluation, job stress, turnover intention, safety management cognition of a general hospital nurse before and after the medical institution certification system. Data were collected from June 1, 2016 to July 17, 2016. The collected data were analyzed by mean, standard deviation, and paired t-test using SPSS 21.0. The results of this study showed that there was no significant difference between before and after certification of medical institution recognition, turnover intention, and safety management awareness, but mean score was high and job stress showed significant difference before and after certification.(t = 2.825, p = <. 005). That is, the job stress was higher than that after the authentication. Therefore, in order to reduce job stress of nurses preparing for certification, active and diverse human and physical support of medical institutions that can reduce work burden is needed.

• Korean Journal of Child Education & Care
• /
• v.19 no.3
• /
• pp.31-46
• /
• 2019

Objective: This research draws synthesized and objected results regarding the factors that influence burnout of child care teachers. The purpose for this is to understand in-depth of the burnout child care teachers experience at site through understanding their experience in depth. Methods: A mix research method including meta-analysis and in-depth interview was proceeded. Results: The main factor of burnout of the child care teacher is structural characteristics factor. Also through in-depth interview 13 main subjects and 28 detailed subject were found in the factors that affect burnout of child care teachers. Most factors which were meaningful results from the meta-analysis were re-confirmed through the in-depth interview. Out of those, the most effective sub-factor showed psychological factor of self-esteem. Conclusion/Implications: Based on these results, we have suggested child care environment unification, training education process for child care teachers, reinforcement of qualification standard, and accreditation system in order to enhance qualitative child care service and reduce exhaustion of child care teachers.

• Journal of radiological science and technology
• /
• v.44 no.6
• /
• pp.655-661
• /
• 2021

Positron emission tomography (PET) images is affected by acquisition time, short acquisition times results in low gamma counts leading to degradation of image quality by statistical noise. Noise2Void(N2V) is self supervised denoising model that is convolutional neural network (CNN) based deep learning. The purpose of this study is to evaluate denoising performance of N2V for PET image with a short acquisition time. The phantom was scanned as a list mode for 10 min using Biograph mCT40 of PET/CT (Siemens Healthcare, Erlangen, Germany). We compared PET images using NEMA image-quality phantom for standard acquisition time (10 min), short acquisition time (2min) and simulated PET image (S2 min). To evaluate performance of N2V, the peak signal to noise ratio (PSNR), normalized root mean square error (NRMSE), structural similarity index (SSIM) and radio-activity recovery coefficient (RC) were used. The PSNR, NRMSE and SSIM for 2 min and S2 min PET images compared to 10min PET image were 30.983, 33.936, 9.954, 7.609 and 0.916, 0.934 respectively. The RC for spheres with S2 min PET image also met European Association of Nuclear Medicine Research Ltd. (EARL) FDG PET accreditation program. We confirmed generated S2 min PET image from N2V deep learning showed improvement results compared to 2 min PET image and The PET images on visual analysis were also comparable between 10 min and S2 min PET images. In conclusion, noisy PET image by means of short acquisition time using N2V denoising network model can be improved image quality without underestimation of radioactivity.

• Journal of the Korean Society of Industry Convergence
• /
• v.27 no.3
• /
• pp.675-684
• /
• 2024

The purpose of the study is to determine the relationship between the infection control organizational culture, infection prevention environment, and infection control performance of nurses at a children's hospital and to identify factors affecting infection control performance. The subjects of the study were 160 nurses from five children's hospitals, and data collection was conducted from February 19 to 29, 2024. Data analysis was performed using frequency, percentage, mean, standard deviation, and difference analysis of variables using t-test, ANOVA, Pearson's correlation analysis, and multiple regression analysis. As a result of the study, infection control performance was positively correlated with infection control organizational culture (r= .610, p< .001) and infection prevention environment (r= .586, p< .001), and as a result of multiple regression analysis, infection control organization The influencing factors appeared in the following order: culture (β= .369), infection prevention environment (β= .312), medical institution accreditation evaluation experience (β= .165), and infection control education experience (β= .137), and the overall explanatory power was It was 50.8% (F=41.966, p< .001). Based on the results of this study, to carry out infection control in children's hospitals, integrated management including the will and effort of individual nurses, support and policy from medical institutions and the government is needed, and the development of an infection control education program that takes into account the special characteristics of children's hospital nurses. Application is necessary.

• Journal of Food Hygiene and Safety
• /
• v.32 no.1
• /
• pp.14-19
• /
• 2017

The purpose of the study was to simplify standard HACCP manual for improving the on-site applicability and increasing the implementation rate of HACCP program for small- and medium-sized dairy farms (SMDF). A survey was carried out in 32 SMDFs using a structured questionnaire. The results indicated that the number of workers had a positive correlation with HACCP certifications (p < 0.05). Most of HACCP non-certified farms (66.7%) were run by two workers with 40-60 cows and milking yields of 1,000-1,500 L per day. Major drawbacks for dairy farmers to implement current HACCP system were the difficulties in daily recording and facility management (40%). On the basis of the survey results, it was suggested that the development of on-site standard HACCP manual and user-friendly record chart with O/X checklist were the most urgent factors to increase HACCP implementation rate. In addition, the alternative third party service for microbial and chemical tests could also be accompanied for small-sized dairy farms.

• Journal of Engineering Education Research
• /
• v.21 no.4
• /
• pp.53-62
• /
• 2018

The purpose of this study is to investigate the current conditions of the domestic and foreign curricula in the field of chemical engineering and to draw implications. The results of the study are as follows. Most of the domestic research universities (including non-certified universities) have curricula organized within the scope of the ABEEK certification, which is the minimum standard guide for chemical engineering curricula. However, we are concerned that chemical engineering education in some domestic universities may lack in education quality and program relevance. Graduates from these universities may not have equivalent qualifications as international graduates. It is considered that most of the 12 domestic universities organize their subjects according to the certificate of accreditation standard and to the traditional subjects of chemistry in the 'Department of Chemical Engineering' or 'Department of Chemical and Biological Engineering Chemical and Biological Engineering'. However, due to the increase in the number of overlapping subjects with other majors because of the movement towards academic diversity, the integrity of the chemical engineering curricula is at risk. In addition, after surveying the major and research areas of the department professors, it has been found that there is a shortage of professors who have majored in chemical engineering. Therefore, there is a concern that students may lack understanding of the core principles of chemical engineering. The results of the analysis of the curricula of overseas research universities (including non-certified universities) are as follows. Although the chemical engineering industry in developed countries like the United States and Europe is advancing and changing very quickly, the chemical engineering education in these countries is highly focused on traditional subjects and other related subjects in order to cultivate traditionally trained chemical engineers. The Department of Chemical Engineering at overseas universities still maintains the academic integrity of the chemical engineering field. This is a significant suggestion for our country. On the other hand, domestic universities are changing the name of their chemical engineering major, or even if the name is maintained, they are fusing their curriculum with other majors such as material engineering. Therefore, it is very necessary at this point to start a discussion regarding the integrity of the department of chemical engineering in Korea. We hope that the departments of chemical engineering in domestic universities maintain the integrity of traditional chemical engineering while operating the curriculum within the scope of the standards of the engineering education certification system.