• Journal of Environmental Impact Assessment
• /
• v.22 no.1
• /
• pp.89-97
• /
• 2013

RADCONS Ver. 1.0 (RADiological CONSequence Assessment Program) was developed for radiological risk assessment in this study. A Gaussian plume model was used to analyze the fate and transport of radionuclides released into the air in case of accidents. Both single meterological data and time series meterological data can be used in RADCONS. To assess the radiological risk of the early phase after an accident, ED (Effective Dose) estimated by both deterministic and probabilistic approaches are presented. These EDs by deterministic and probabilistic will be helpful to efficient decision making for decision makers. External doses from deposited materials by time are presented for quantifying the effects of mid and late phases of an accident. A radiological risk assessment was conducted using RADCONS for an accident scenario of 1 Ci of Cs-137. The maximum of ED for radii of 1,000 meters from the accident point was 8.51E-4 mSv. After Monte-Carlo simulation, considering the uncertainty of the breathing rate and dispersion parameters, the average ED was 8.49E-4, and the 95 percentile was 1.10E-3. A data base of the dose coefficients and a sampling module of the meteorological data will be modified to improve the user's convenience in the next version.

• Fire Science and Engineering
• /
• v.17 no.3
• /
• pp.61-73
• /
• 2003

Most of the accidents occurred from the chemical plants are related to the catastrophic gas release events when the large amount of toxic materials is leaked from its storage tank or transmitting pipe lines. In this case, the greatest concerns are how the spreading behaviors of leakages are depended on the ambient conditions such as air stability and other environmental factors. Hence, we have focused on the risk assessments and consequential analysis for chlorine as an illustrative example. As appeared in the result, Fire & Explosion Index depicted it a bit dangerous with presenting the comprehensive degrees of hazard 90.7. And as a result of Phast6.0/ALOHA, the trends of each scenario appeared considerably identical although there are some differences in the resulting effects according to the input data for the Gas Model. The consequence analysis is performed numerically based on the dense gas mode. In the future, using more correct input data, material properties, and topographical configuration, the method of this research will be useful for the guideline of the risk assessment when the release of toxicants breaks out.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.11 no.2
• /
• pp.699-722
• /
• 2019

It is difficult to observe the potential risks of lifting or turn-over operations in the early stages before a real operation. Therefore, many dynamic simulations have been designed to predict the risks and to reduce the possibility of accidents. These simulations, however, have usually been performed for predetermined and fixed scenarios, so they do not reflect the real-time control of an operator that is one of the most important influential factors in an operation; additionally, lifting or turn-over operations should be a collaboration involving more than two operators. Therefore, this study presents an integrated method for a collaborative simulation that allows multiple workers to operate together in the virtual world. The proposed method is composed of four components. The first component is a dynamic analysis that is based on multibody-system dynamics. The second component is VR (virtual reality) for the generation of realistic views for the operators. The third component comprises the control devices and the scenario generator to handle the crane in the virtual environment. Lastly, the fourth component is the HLA (high-level architecture)-based integrated simulation interface for the convenient and efficient exchange of the data through the middleware. To show the applicability of the proposed method, it has been applied to a block turn-over simulation for which one floating crane and two crawler cranes were used, and an offshore module installation for which a DCR (dual-crane rig) was used. In conclusion, the execution of the proposed method of this study is successful regarding the above two applications for which multiple workers were involved.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.46 no.2
• /
• pp.106-113
• /
• 2009

Recently, due to many industrial accidents at construction sites, a variety of researches for structural health monitoring (SHM) of buildings are progressing. For real site application of SHM, one of the advanced technologies has blown as wireless sensor networks (WSN). In this paper, we proposed WIVA(WSN Monitoring framework based on 3D Visualization and Augmented Reality in Mobile Devices) system that applies 3D visualization and AR technology to mobile devices with camera based on WSN in order to expand the extent of information can observe. Moreover, we performed experiments to validate effectiveness in 3D and AR mode that utilize WSN data based on IEEE 802.15.4. In real implementation scenario, we demonstrated a fire occurrence test in 3-story building miniature.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2011.06a
• /
• pp.85-86
• /
• 2011

On 7 December 2007, the Hebei Spirit, a 260,000 dwt VLCC, anchored near Korea's Daesan Port, was collided with a passing crane-carrying barge Samsung1, which was under tow of two tugs Samsung T5 and Samho T3. In this study, the behaviour of Hebei Spirit at the time of the accident has been reproduced and analyzed by simulation. This study precedes the study for the investigation of any available countermeasures for Hebei Spirit to prevent the accident. The simulation has been done only for Hebei Spiri and the motion of Samsung barge is just given with recorded AIS data. Dynamic characteristics of Hebei Spirit have been modeled based on empirical data and her sea trial data. Effects of current, wave and wind are also estimateed using empirical formula. Considering uncertainty of environmental condition and control of Hebei Spirit, simulation has been done by varying engine control method and holding power coefficients of the anchor. Finally, based on simulations, the most plausible scenario on the state of anchor and engine control could cause real accidents.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.10
• /
• pp.1860-1866
• /
• 2016

Helicopter-related collision accidents with structures mostly occur at landing, especially in a limited visibility environment, which necessitates some secondary equipment like a radar that can generate stationary clutter image. In this paper, we propose an algorithm that makes an image of stationary ground clutter in two dimensional range and azimuth angle domain. We present a mathematical model for the received signals from each clutter patch in the iso range ring and analyze their clutter and Doppler characteristics, assuming that a helicopter-borne radar has a rotational antenna. We propose a filter structure, which suppresses side lobe signal components while extracting a main lobe signal component, and suggest a solution for a problem stemmed from the filtering process. Finally, by conducting a simulation we show the performance of the suggested imaging algorithm on a two dimensional virtual scenario of the topographic clutter.

• Journal of the Korean Institute of Gas
• /
• v.15 no.2
• /
• pp.1-8
• /
• 2011

In this research, the safety trends and technologies of HCNG, a mixture of hydrogen and natural gas, are analyzed. This is an attracting alternative fuels to meet the strengthened automotive exhaust gas emission standards. HCNG is very important opportunities and challenges in that it is available the existing CNG infrastructures, meets the strengthened emission standards, and the technical, social bridge of the coming era of hydrogen. It is essential for the commercialization of HCNG that hydrogen - compressed natural gas blended fuel for use in preparation of various safety considerations included accidents scenario, safety distance, hydrogen attack, ignition sources and fire detectors are examined. Risk assessments also are suggested as one of permission procedure for HCNG filling station.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.12 no.1 s.24
• /
• pp.39-45
• /
• 2006

Based on the previous studies on alcohol effects on human behaviour and performance in transportation system such as air-plane and car driving, the alcohol exposure before and on watch of a ship has a great influence on subsequent behaviour. In this paper, to examine the drinking status of officers on board multiple choice questionnaires are circularized under instruction and surveyed for 118 officers. According to the results of the questionnaire survey on alcohol dependency (Alcoholism) that was invented by WHO, over 27 % of those surveyed represented alcohol abuse symptoms. In addition to that, the existing state and awareness for on-board-drinking was summarized to make a scenario of drink-operation with a ship handling simulator to investigate the effect of alcohol (0.08 g% blood alcohol concentrations) on ship operational performance. A main effect for alcohol was found indicating that ship operational performance was comparatively impaired by this alcohol relative to performance in the non-alcohol condition The results of this research can be applied to minimize marine accidents as basic data.

• Nuclear Engineering and Technology
• /
• v.36 no.1
• /
• pp.24-35
• /
• 2004

In order to analyze the hydrogen distribution during a severe accident in the APR1400 containment, GASFLOW II was used. For the APR1400 NPP, a hydrogen mitigation system is considered from the design stage, but a fully time-dependent, three-dimensional analysis has not been performed yet. In this study GASFLOW code II is used for the three-dimensional analysis. The first step to analysis involving hydrogen behavior in a full containment with the GASLOW code is to generate a realistic geometry model, which includes nodalization and modeling of the internal structures such as walls, ceilings and equipment. Geometry modeling of the APR1400 is conducted using GUI program by overlapping the containment cut drawings in a graphical file format on the mesh view. The total number of mesh cells generated is 49,476. And the calculated free volume of the APR1400 containment by GASFLOW is almost the same as the value from the GOTHIC modeling. A hypothetical SB-LOCA scenario beyond design base accident was selected to analyze the hydrogen behavior with the hydrogen mitigation system. The source of hydrogen and steam for the GASFLOW II analysis is obtained from a MAAP calculation. Combustion pressure and temperature load possibilities within the compartments used in the GOTHIC analysis are studied based on the Sigma-Lambda criteria. Finally the effectiveness of HMS installed in the APR1400 containment is evaluated from the point of severe accident management

• Nuclear Engineering and Technology
• /
• v.45 no.7
• /
• pp.871-894
• /
• 2013

KAERI (Korea Atomic Energy Research Institute) has been operating an integral effect test facility, the Advanced Thermal-Hydraulic Test Loop for Accident Simulation (ATLAS), for transient and accident simulations of advanced pressurized water reactors (PWRs). Using ATLAS, a high-quality integral effect test database has been established for major design basis accidents of the APR1400 plant. A Domestic Standard Problem (DSP) exercise using the ATLAS database was promoted to transfer the database to domestic nuclear industries and contribute to improving a safety analysis methodology for PWRs. This $2^{nd}$ ATLAS DSP (DSP-02) exercise aims at an effective utilization of an integral effect database obtained from ATLAS, the establishment of a cooperation framework among the domestic nuclear industry, a better understanding of the thermal hydraulic phenomena, and an investigation into the possible limitation of the existing best-estimate safety analysis codes. A small break loss of coolant accident with a 6-inch break at the cold leg was determined as a target scenario by considering its technical importance and by incorporating interests from participants. This DSP exercise was performed in an open calculation environment where the integral effect test data was open to participants prior to the code calculations. This paper includes major information of the DSP-02 exercise as well as comparison results between the calculations and the experimental data.