• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.398-409
• /
• 2019

As the prevention of patient safety accidents has been strengthened in the accreditation process of medical institutions, patient safety, which is the maintenance of patient safety by managing medical accidents around the patients, is considered a subject that is important as a disease cure. The purpose of this study is to develop a Patient Safety Program using simulated situations for inpatients at a general hospital ward and to understand the effects on knowledge, performance, and perception of patient safety before and after the programs. In addition, the satisfaction of patient safety education is verified after application of the program. The participants were 30 inpatients at a general hospital. Data were collected from April 15 to 30, 2019 and analyzed using IBM SPSS Version 23.0. The results of the preand post-education revealed a statistically significantly improvement of patient safety knowledge, performance, perception and educational satisfaction. The Patient Safety Education Program using simulated situation was an effective educational program for the inpatients to improve patient safety knowledge, performance, perception, and educational satisfaction. Therefore, this program demonstrated a positive effect of patient safety and it is expected that it can be used as the basis of an education program in patient safety education in a clinical setting.

• International Journal of Highway Engineering
• /
• v.14 no.1
• /
• pp.35-43
• /
• 2012

The Government is implementing the safety measures for pedestrian in living zone to decrease the traffic accident casualties in half. It is urgently to study the guideline because it contains to make the guideline of a median strip in City to prevent the violation of central line and jaywalking on the main contents. So, this study analyzed the pedestrian accidents and the violation of central line, and studied the type of a median strip, the installation guideline through studying the minimum crossing. Consequently, this study found out that a median strip which revised the attention inducement stick to decrease jaywalking could not have the strong prevention function of a crash barrier, so if it happens separation after the collision between vehicles, it induced the secondary accidents, and could take negative effects on traffic safety. In consideration of driving safety, this study analyzed that if it installs a median stirp, it has to ensure one meter, and such a thing could prevent the separation of lane or damage of facilities. However, if it is hard to ensure the space because of narrow road width, it could install a median strip in case of installing the road surface mark 0.5m. And the installation of the attention inducement stick or a median strip on the central line could be possible to induce the violation of central line, thus it is desirable not to install only anythings but also raised pavement markers.

• Korean Security Journal
• /
• no.17
• /
• pp.143-155
• /
• 2008

Purpose of this study is to analyze actual perception of security business of security workers centering on employees working within building and to improve accomplishment of works for security workers. For this, first, activities of security workers are discussed. Second, perception of employees of companies for the necessity of security workers, non-necessity of security workers, qualification requirements of security workers for improving business recognition were established as a framework of the study. Changes for recognition of security works in modern life are a little falling behind compared to unstopping economic development and diversifying job classifications. Even at present, expression of security works is still regarded as manager of facilities or apartments in the past. In other words, it is recognized as a simple change of title and names from apartment guard to security workers. Security works in the modern job classification is settling down as a professional field of facility management and as a part of various controls such as protection and security and its field is also expanding. It is a professional job with the purpose to analyze and prevent diverse criminal actions occurring in the society and also to introduce alternative measures with the role to prevent accidents to be occurred in variety in advance instead of simple working format taking a fixed guard post. Area of security works for the purpose of maximizing necessity of security works shall have equipped with deployment of professional security workers, consideration of business satisfaction of security workers, prevention education for rapidly changing safety accidents, and substantiality in the field. We expect to have more sophisticated area of security works with ceaseless efforts and with instillation of recognition of professionalism by security workers themselves.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.1
• /
• pp.43-48
• /
• 2020

Open pit mines for limestone mining require rapid development of technologies and efforts to prevent safety accidents due to rapid deterioration of the slope due to deforestation and rapid changes in the topography. Accurate three-dimensional spatial information on the terrain should be the basis for reducing environmental degradation and safe development of open pit mines. Therefore, this study constructed spatial information about open pit mine using UAV(Unmanned Aerial Vehicle) and analyzed its utility. images and 3D laser scan data were acquired using UAV, and digital surface model, digital elevation model and ortho image were generated through data processing. DSM(Digital Surface Model) and ortho image were constructed using image obtained from UAV. Trees were removed using 3D laser scan data and numerical elevation models were produced. As a result of the accuracy analysis compared with the check points, the accuracy of the digital surface model and the digital elevation model was about 11cm and 8cm, respectively. The use of three-dimensional geospatial information in the mineral resource development field will greatly contribute to effective mine management and prevention of safety accidents.

• The Journal of the Korea Contents Association
• /
• v.18 no.6
• /
• pp.169-179
• /
• 2018

The Korean society has become increasingly concerned about the safety consciousness because of the Sewol Ferry disaster in April 2014. This shows the absence of social system and safety consciousness of Korean society that has been rapidly growing through fast industrialization. The purpose of this paper is to suggest guidelines for the production of a safety animation by approaching the discourse of public value. For this research process, first, literature review will be conducted by focusing on the safety culture, causes of safety accidents, safety education and educational effect using animation. Second, I will analyze 11 safety animation films by focusing on (1) construction of accident environment(narrative, character and background design) (2) exploration of dangerous elements and accident happening(accident type and dangerous elements, method of direction for accident happening, damage degree) (3) the guideline for safety behaviour. Third, guidelines for the production of safety animation will be suggested by analyzing the results of literature reviews and case studies in a comprehensive way. It is expected that this paper will be used as a basic data for academic research and animation production related to the safety accident.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.5
• /
• pp.471-480
• /
• 2020

Although the domestic industrial accidents have been decreased gradually, deaths in the construction sites have been occupied 49.9 percent of the total industry and deaths from fall accident have been accounted for 59.7 percent of the construction industry. In order to prevent fall accident, various safety activities and policy have been carried out. However, the impact on the domestic construction industry was inadequate. On the other hand, in advanced countries, such as the United States, Japan, EU, and Singapore Industrial accidents have been lower than domestic industry due to safety activities, the regulations and policies appropriate for each country's situation. In this study, we compare the major points of the Industrial Safety and Health Act in developed countries with those in South Korea to reduce the number of falls, and propose a revision. As a result of conducting research, three revisions have been proposed as 1) Enhance standards for fall height, 2) Improvement of upper safety rail height on guardrail, 3) Revision and research on Horizontal Sarety bar attachment system. This study will be utilized as a basic study for the analysis of cases in advanced countries.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.6
• /
• pp.611-619
• /
• 2018

The researches have only conducted regarding construction safety management and risk on interior construction site(workers) and is insufficient about the exterior construction site(third party). As a result, ordinary people who were near construction sites have injured and hold a negative view when they think about the construction industry because construction industry have been exposed to them having a high accidents rate through media. In addition, the importance of industrial disaster prevention is emphasized at this point in time, the overall safety management system should be constructed with considering construction site external(third human) for improving the negative image of the construction industry among ordinary people. Therefore, the objective of this study is to develop the quantification model of human accident utilizing the insurance claim payout occurred construction site exterior(third party). In the future, it can be used as a reference for developing the safety management checklist in construction site interior exterior and development for forecasting control system of human accident.

• Journal of the Korea Institute of Construction Safety
• /
• v.2 no.1
• /
• pp.28-35
• /
• 2019

The average number of deaths in the construction industry reaches 500 per year, and in particular, it is confirmed that the type of accidents and deaths caused by disasters such as work platforms has occupied more than 60% of the total. In this study, we presented a structured and combined solution for technology, management, education, and cost that can solve systematically, politically, and external environmental factors as well as direct influence factors. In addition, we examined the safety and safety standards of domestic and international safety, and discussed implications. First, direct impact factors, organizational impact factors, policy influence factors, and external environmental impact factors were examined and classified into technical, education, and institutional dimensions. Second, in relation to the installation of the work scaffold, the standards (OSHA 1926.452), UK (The Work at Height Regulations 2005 No.735, BS5975), Japan (Labor Safety and Sanitation Regulations) and Germany (DIN 4420_4, DIN EN12810). In the case of domestic safety standards, similar to the foreign safety standards, safety measures such as materials and specifications are applied. However, details related to the installation, assembly and structure of the work platform are somewhat different from those in the United States and the United Kingdom excluding Japan. Using the results of this study, it is possible to understand the cause of the accident of foot pedestrian accident more systematically and comprehensively, and safety managers and researchers are expected to help in the accident investigation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.597-602
• /
• 2021

Even in the era of the 4th industrial revolution, the prevention of industrial accidents is still an important issue in industrial sites. In solving the problem of industrial safety, a product can be difficult to market if there is a lack of standard or method for a reliable performance evaluation. The purpose of this study was to develop and evaluate a test method for a wearable airbag product for protecting the body from falls that was newly developed to respond to fall accidents in industrial sites. As a research method, reliable evaluation standards were developed and applied through four stages of the evaluation and development process (Step 1: Product review, Step 2: Data research, Step 3: Expert meeting, Step 4: Drawing evaluation standard). In addition, the impact force was evaluated according to the developed evaluation standard. The fall impact force obtained through the evaluation showed a reduction effect of approximately 96% compared to the existing impact force. Therefore, the fall impact force was reduced significantly when the airbag was applied. This will enable new convergence products to be launched on the market and produce an environment where industrial workers can work safely.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.1
• /
• pp.54-63
• /
• 2022

The Marine Accident Investigation and Tribunal System is intended to provide a credible solution to prevent the recurrence of similar accidents. When a marine accident occurs, the Korea Maritime Safety Tribunal seeks to find its root causes through an analysis of what provoked the accident. It also contributes to the development of safety policies or practices by making a decision based on the findings. However, if the decision presented as the root cause of a marine accident is ambiguous or unclear, it may be difficult to achieve its intended goal. Hence, if we read some of the decisions of the Maritime Safety Tribunal, it is selective to directly apply the cause of an accident as a source of the measures that can prevent its recurrence. A typical example of this is the expression: "when a seafarer neglects ordinary practice of seaman." The term "ordinary practice of seaman" has been criticized for being used in some decisions like a master key where it is not easy to determine which specific rules or regulations were violated or blame the involved seafarers. Such term is present in Article 2 of the International Regulations for Preventing Collisions at Sea 1972. For the proper use of the term, this paper seeks to compare and establish the concepts of "ordinary practice of seaman" and the duty of care by providing a systematic interpretation of the original text. In addition, the duty of care was reviewed from the perspective of administrative, civil, and criminal laws. Furthermore, relevant legal precedents were reviewed and presented in the study. Accordingly, it is expected that the term "ordinary practice of seaman" would be properly used in decisions that contribute to the prevention of the recurrence of similar marine accidents.