• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.05a
• /
• pp.14-15
• /
• 2021

Recently, the size of tiles used for bathroom walls in apartment houses is gradually increasing in size. The problem is that when these large-sized tiles are attached by the sticking method, due to the nature of the method, there is a concern about the stability of the attachment to the part (pupil) where the tile and the adhesive are not attached. The problem is serious as it leads to lawsuits in the outbreak court. In addition, it is urgent to verify the adhesion stability of the sticking method because secondary damage occurs due to a safety accident caused by the falling of the tile. Ministry of Land, Infrastructure and Transport [Investigation of defects in apartment houses, calculation of repair cost and defect determination criteria] ① The tile adhesion strength is 0.39N/mm² or more and ② It is specified to fill 80% or more of the base area of the tile backside, but this is currently trendy. It is considered that large-sized tiles need to be verified from multiple angles, and as part of that, we intend to verify the adhesion stability according to the area to be attached to large-sized tiles.

• Journal of the Korea Safety Management & Science
• /
• v.15 no.4
• /
• pp.145-152
• /
• 2013

The purpose of this study was to investigate the effect of risk awareness on injury experience in quick delivery service workers. Risk awareness has complicate characteristics such as its level of worker and worker's decision about the level of other's risk perception. Data were collected by interview survey with structured questionnaire about injury experience, risk perception, work characteristics, and socio-demographic characteristics of quick delivery service workers by cross sectional survey design in 2012. The sample size was 120 respondent of quick delivery service workers. Statistical method for this study was hierarchical logistic regression method with 3 different models using socio-demographic characteristics and work characteristics and risk perception, etc. The difference between the level of risk perception of quick delivery service and other's was statistically significant effect on the experience of injury. Especially the higher the level of risk perception of quick delivery service workers is than other's, the lower the injury experience of quick delivery service worker is. The limitation of this study can be found in survey design. The future study for investigation of mechanism of the combined effect of risk perception of quick delivery service workers and others on injury experience.

• Journal of Advanced Navigation Technology
• /
• v.24 no.3
• /
• pp.163-172
• /
• 2020

Flight data recorder (FDR) for accident investigation is required to comply with EUROCAE(ED-112) standard so that flight data can be restored when exposed to extreme conditions due to aircraft crash. Since the ED-112 standard defines the general requirements for all aircraft, it is essential to analyze detailed requirements for FDR software to apply appropriate requirements selectively according to the configuration and operation concept of a specific aircraft. In this paper, the software requirements applicable to unmanned aircraft will be analyzed and the FDR software design will be proposed. Also, a software verification method for each requirement will be presented to verify that the implemented software is designed to satisfy all requirements.

• Nuclear Engineering and Technology
• /
• v.34 no.5
• /
• pp.421-432
• /
• 2002

As one of the advanced design features of the APR1400, direct vessel injection (DVI) system is being considered instead of conventional cold leg injection (CLI) system. It is known that the DVI system greatly enhances the reliability of the emergency core cooling (ECC) system. However, there is still a dispute on its performance in terms of water delivery to the reactor core during the reflood phase of a large-break loss-of-coolant accident (LOCA). Thus, experimental validation is under progress. In this paper, test results of direct ECC bypass performed in the steam-water test facility tailed MIDAS (Multi-dimensional Investigation in Downcomer Annulus Simulation) are presented. The test condition is determined, based on the preliminary analysis of TRAC code, by applying the ‘modified linear scaling method’with the l/4.93 length scale . From the tests, ECC direct bypass fraction, steam condensation rate and information on the flow distribution in the upper annulus downcomer region are obtained.

• Journal of the Korean Society of Safety
• /
• v.33 no.6
• /
• pp.128-135
• /
• 2018

Currently, the government selects products that are likely to cause harm to consumers as safety management targets and classifies them into three types: safety certification, safety confirmation, and supplier conformity verification. In addition, the government conducts safety surveys on products in circulation or accident products, and recalls products that are of great concern to consumer risks. In this paper, we have developed RAP (Risk Assessment method based on Probability), which is a probability based product risk assessment method, for the classification of safety management type of product and safety investigation, and have shown an application example. In this process, information is used for the CISS (Consumer Injury Surveillance System) of the Korean Consumer Agency. In addition, we apply the cluster analysis to classify the current supervised children products into three groups. Then, we confirm the effectiveness of RAP by comparing the result of RAP application, cluster analysis result and current safety management classification type. Also, we recognize the need to review the current safety management classification criteria for classifying products into three types.

• Journal of the Korean Institute of Gas
• /
• v.26 no.5
• /
• pp.58-65
• /
• 2022

Gas explosion accidents could cause a catastrophe. we need specialized and systematic accident investigation techniques to shed light on the cause and prevent similar accidents. In this study, we had performed LPG explosion simulation using AUTODYN which is the commercial explosion program and predicted the damage characteristics of the structures by LNG explosive power. In the first step, we could get LPG's physical and chemical explosion properties by calculation using TNT equivalency method. And then, by applying TNT equivalency value about the explosion limit concentration of LPG on the 2D-AUTODYN simulation, we could get the explosion pressure wave profiles (explosion pressure, explosion velocity, etc.). In the last step, we performed LPG explosion simulation by applying to the explosion pressure wave profiles as the input data on the 3D-AUTODYN simulation. As a result, we had performed analyzing of the explosion characteristics of LPG in accordance with concentration through the 3D-AUTODYN simulation in terms of the explosion pressure behavior and structure destruction and damage behavior. The analyses showed that the generated stresses of the structures were lower than the compressive strengths in cases 1(two lane) and 2(four lane), while the generated stress in case 3(six lane) was 8.68e3 kPa, which exceeded the compressive strength of 5.89e3 kPa.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.5
• /
• pp.74-91
• /
• 2023

Several that analyzed the effectiveness of traffic safety facilities a method of comparing changes in the number of accidents, accident severity, speed through traffic accident data before and after installation or speed data collected from vehicle detection systems (VDS). , when traffic accident data is used, it takes a long time to collect because must be collected for at least one year before and after installation. , the road environment may change during this period, such as the addition of other traffic safety facilities in addition to the facilities to be analyzed. , the location of the VDSs for speed data is often different from the location where analysis is required, and there is a problem in that the investigators are exposed to the risk of traffic accident during on-site investigation. Therefore, this study a case study by establishing a methodology to determine effectiveness video images with a drone, extracting data using a program, and comparing vehicle driving speeds before and after speed reduction facilities. Vehicle speed surveys using drones are much safer than observational surveys conducted on highways and have the advantage of tracking speed changes along the vehicle, it is expected that they will be used for various traffic surveys in the future.

• Journal of the Ergonomics Society of Korea
• /
• v.36 no.5
• /
• pp.579-587
• /
• 2017

Objective: The purpose of this study is to measure the workload of Korea coastal ship crew members, to investigate whether they are following work-break time regulations and to identify the main causes of their workload. Background: According to the US Coast Guard, about 33% of human casualties are reported to be due to fatigue, and 30% of marine casualties reported by the British Marine Accident Investigation Agency (MAIB) are attributed to crew fatigue. But the coastal ship are not managed for business hours and breaks despite the harsh environment. Method: The workload of duty crew members on the 100 domestic coastal vessels was measured. It was also investigated whether they are following domestic and international work-break time regulations. Finally, the marine accidents resulted from the fatigue of the crew was analyzed. Results: As a result of workload analysis, the workload on the 42~62% of the vessels exceeded the standard of working time on the related regulation. The workload increased with the number of inbound and outbound ports. Especially, in the system where there are two seafarers, the workload exceeded the working time requirement. As a result of the marine accidents analysis on 100 vessels, it was found that collision and grounding occurred due to fatigue, workload and drowsiness in 7 marine accidents out of 30 marine accidents. Conclusion: It is necessary for the shipping companies to introduce an operation management manual for the management of the crews' workload and reasonable crew arrangement. It is also required for crew members to easily record work times and for shipping companies to manage the record. It would be possible to prevent many marine accidents by providing adequate rest to the crews and flexibly adjusting their working hours. Application: The results of this study can be used as fundamental data to manage crews' fatigue and to make job management manuals.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.3
• /
• pp.489-501
• /
• 2017

The collapse accidents during a open ground excavation in urban areas not only lead to human injuries and material damages in the construction site, but also lead to road sinks and damages to the adjacent facilities due to settlement of ground around the construction site. Therefore, during a open ground excavation in the urban areas, it is necessary to thoroughly prepare for prevention of collapse accidents, and consider whole construction stage such as planning, design and construction. In this study, the priorities to be managed mainly were obtained in order to prevent collapse accidents during a open ground excavation. After analyzing results from past accidents cases for open ground excavations, priorities were evaluated regarding collapse-inducing elements using the Delphi technique which is a decision-making method by consensus among experts. As a result, insufficient groundwater treatment, bad geotechnical investigation and instability on construction, etc. were obtained as priorities for prevention of collapse accidents.

• The Korean Journal of Air & Space Law and Policy
• /
• v.22 no.2
• /
• pp.155-175
• /
• 2007

As intellectual terror threats increase, we feel the limit in coping with those threats and the things we do are placing traditional X-ray machines & ETD and increasing aviation security staffs. In fact, even if air transportation system is the fast and most efficient transportation methods, it is true that there are many inconveniences to endure due to terror threats. In the name of security, even if we make a lot of efforts and time to screen both good-natured passengers, baggage, cargo and suspicious passengers, it is impossible to screen perfectly and it is not an efficient methods. Therefore, we introduce profiling system that reduce the effort to screen good-natured passengers but focus on screening dangerous passengers and baggages. Profiling system strengthens aviation security, using the concept "Selection & Concentration". Israel started to introduce manual profiling system in aviation security, which is interviewing suspicious passengers and it has been used in crime investigation since 1960. And it has been upgraded and diversified to CAPPS(Computer Assisted Passenger Screening Program) and SPOT(Screening Passenger by Observation). So, this theses is to study on the concept & kind of profiling and profiling methods adopted in airlines. Also it presents the method of introduction of profiling system in Korea and the necessity of making law on it.