• Journal of the Society of Naval Architects of Korea
• /
• v.46 no.6
• /
• pp.595-602
• /
• 2009

Great number of ships has been built by Korean Shipyards since early of 2,000 due to the expanding worldwide trade. Most of shipyards have enlarged the weight of erection block and many blocks have been assembled in block fabrication factories outside the shipyards to reduce the shipbuilding period. Especially, Giga blocks that exceed 2,000 tons are often assembled by the block fabrication factories outside the shipyard. Generally, the blocks are transported to building dock in shipyard by towing barges. Accident can be occurred during the sea transportation and it may bring about not only the delay of delivery but also a disaster on the ocean environments. Transportation condition of GPE (Grand Pre-Erection) block differs from the ocean going conditions of marine vessels. Special consideration should be included before transportation work in order to guarantee the safety of GPE blocks and barge carriers. In this paper, several examples, which have been investigated to set up the safety standard of transportation of the GPE blocks on coastal routes, are introduced. For the barge transportation on coastal sea route, the design criteria are discussed, considering the design wave, the acceleration induced by wave, structural strength, and the fixture condition of blocks.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.54 no.4
• /
• pp.343-352
• /
• 2018

In this study, a motion control problem for the vessels towed by tugboats or towing ships on the sea is considered. The towed vessel looks like the barge ship, which is used for many purposes. In these vessels, basically, the power propulsion system is not installed but just towed by a towing vessel such as tugboats with ropes and wires. It means that the motions of towed vessel are basically dependent on the tracking route of towing boat. Therefore, in some cases, undesirable and unpredictable motions may be made by environmental factors such as wave, wind attack and so on. As a result, a collision accident with others may occur during maneuvering situation. Based on these facts, the authors try to encourage the steering performance of the towed vessel by using controllable rudders without any propulsion system. In this study, especially, a controllable vessel with three rudders is considered, and a mathematical model is induced for the future study. The model is described as surge, sway motion and inertia moment by following the general representation method for the surface ship.

• Fire Science and Engineering
• /
• v.32 no.6
• /
• pp.91-99
• /
• 2018

Recently, the spread of ESS in Korea has increased and a fire accident has also occurred. By July 2018, there were a total of 7 cases. All 7 cases were ESS systems consisting of lithium-ion batteries and were burned down. Both the automatic fire extinguisher and the fire department were not able to digest. In this paper, the characteristics of ESS fire are analyzed based on recent ESS fire situation and field investigation, and the cause of fire is divided into environmental, electrical and thermal factors. As a result, it was found that the ESS fire was correlated with the installation environment of the system. In the domestic and overseas lithium ion battery test standard and ESS facility standard survey, the trends and differences of domestic and overseas facilities standards were identified. Based on the fire status and field investigationy, and domestic and overseas facility standard survey, measures were suggested to prevent and prevent the spread of fire in ESS fire.

• Journal of Digital Convergence
• /
• v.16 no.12
• /
• pp.611-617
• /
• 2018

This study divided hairpiece-related technologies into three categories: Materials, Structure, Hair Extensions. Then, it investigated the current patent application trends in the above technologies and attempted to determine what aspects should be focused on in terms of the growth potential of hairpiece-related technologies and future technologies. A hairpiece is used to cover a specific balding area resulting from innate factors such as heredity or acquired traits including disease or accident. It is also used to make short hair look longer. Recently, as the rates of hair loss caused by stress increase, there has been a rising demand for hairpieces that can quickly and conveniently cover a balding region as well as satisfy people's aesthetic needs through diverse hairstyling. Even though patents have been applied evenly across hairpiece technology fields, patent activity has declined since 2010 was confirmed. Therefore, this study targets the facilitation and expansion of the hairpiece technology market by suggesting desirable R&D directions for future hairpiece-related technologies after analyzing current hairpiece patent trends.

• Journal of Wetlands Research
• /
• v.21 no.2
• /
• pp.157-162
• /
• 2019

Recently, the occurrence of unusual heavy snow and cold are increasing due to the unusual global climate change. In particular, the temperature dropped to minus 69 degrees Celsius in the United States on January 8, 2018. In Korea, on February 17, 2014, the auditorium building in Gyeongju Mauna Resort was collapsed due to the heavy snowfall. Because of the tragic accident many studies on the reduction of snow damage is being conducted, but it is difficult to predict the exact damage due to the lack of historical damage data, and uncertainty of meteorological data due to the long distance between the damaged area and the observatory. Therefore, in this study, available data were collected from factors that are thought to be corresponding to snow damage, and the amount of snow damage was estimated categorically using a random forest. At present, the prediction accuracy was not sufficient due to lack of historical damage data and changes of the design code for green houses. However, if accurate weather data are obtained in the affected areas. the accuracy of estimates would increase enough for being used for be the degree preparedness of disaster management.

• Advances in Computational Design
• /
• v.4 no.1
• /
• pp.53-72
• /
• 2019

Safety measures for tower cranes are extremely important among the seismic countermeasures at high-rise building construction sites. In particular, the collapse of a tower crane from a high position is a very serious catastrophe. An example of such an accident due to an earthquake is the case of the Taipei 101 Building (the author was the project director), which occurred on March 31, 2002. Failure of the bolted joints of the tower-crane mast was the direct cause of the collapse. Therefore, it is necessary to design for this eventuality and to take the necessary measures on construction sites. This can only be done by understanding the precise dynamic behavior of mast joints during an earthquake. Consequently, we created a new hybrid-element model (using beam, shell, and solid elements) that not only expressed the detailed behavior of the site joints of a tower-crane mast during an earthquake but also suppressed any increase in the total calculation time and revealed its behavior through computer simulations. Using the proposed structural model and simulation method, effective information for designing safe joints during earthquakes can be provided by considering workability (control of the bolt pretension axial force and other factors) and less construction cost. Notably, this analysis showed that the joint behavior of the initial pretension axial force of a bolt is considerably reduced after the axial force of the bolt exceeds the yield strength. A maximum decrease of 50% in the initial pretension axial force under the El Centro N-S Wave ($v_{max}=100cm/s$) was observed. Furthermore, this method can be applied to analyze the seismic responses of general temporary structures in construction sites.

• Journal of Ocean Engineering and Technology
• /
• v.35 no.2
• /
• pp.141-149
• /
• 2021

The A60 class deck penetration piece is a fire-resistance apparatus installed on the deck compartment to protect lives and to prevent flame diffusion in the case of a fire accident in a ship or offshore plant. In this study, the sensitivity of the fire-resistance performance and approximation characteristics for the A60 class penetration piece was evaluated by conducting a transient heat-transfer analysis and fire test. The transient heat-transfer analysis was conducted to evaluate the fire-resistance design of the A60 class deck penetration piece, and the analysis results were verified via the fire test. The penetration-piece length, diameter, material type, and insulation density were used as the design factors (DFs), and the output responses were the weight, temperature, cost, and productivity. The quantitative effects of each DF on the output responses were evaluated using the design-of-experiments method. Additionally, an optimum design case was identified to minimize the weight of the A60 class deck penetration piece while satisfying the allowable limits of the output responses. According to the design-of-experiments results, various approximate models, e.g., a Kriging model, the response surface method, and a radial basis function-based neural network (RBFN), were generated. The design-of-experiments results were verified by the approximation results. It was concluded that among the approximate models, the RBFN was able to explore the design space of the A60 class deck penetration piece with the highest accuracy.

• Journal of Korean Public Health Nursing
• /
• v.34 no.3
• /
• pp.473-489
• /
• 2020

Purpose: This study investigated the patient safety culture (PSC), the perception of importance on patient safety management (PIPSM) and the patient safety management activities (PSMA) of care workers in nursing homes. This was a descriptive study that attempted to provide basic data for the patient safety education program of care workers. Methods: Data were collected using questionnaires and interviews from July 1 to 31 in 2020. One hundred and seventy-four care workers participated in quantitative research. The collected data were analyzed by the SPSS/WIN 25.0 program using descriptive statistics, t-test, ANOVA, Bonferroni, and Pearson's correlation. The qualitative data were collected through semi-structured, audio-recorded interviews with six representatives and six care workers from six nursing homes. Content analysis was performed to analyze the data. Results: Positive correlations were observed between PSC and PIPSM, and between PIPSM and PIPSM. Care workers' experience in patient safety management was in the following six categories: "Safety accident risk factors", "Type of safety accidents", "How to prevent safety accidents", "Effective safety management education", "Emphasis on occupational ethics of care workers", and "Needs for standard protocol" Conclusion: These findings indicate that considering the care workers' age and facility size, nurses should enhance patient safety education for care workers and establish a management activity system.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.3
• /
• pp.47-58
• /
• 2021

Recently, personal mobility (PM)-related complaints and PM accidents have increased as the number of users soars due to growth in the domestic PM market and the emergence of a number of electric scooter-sharing services. As a result, the need for PM education and practice spaces is emerging as a way to reduce accidents caused by poor PM manipulation and operation. In this study, we analyze the relevant conflict factors in order to come up with a systematic operation and activation plan for PM, and as an alternative, we review and propose how to operate a PM playground and test zone. It is expected that basic data collection and analysis of rudimentary driver behavior through PM playground operations will improve users' operational safety, and various conflicts of interest between users and non-users will be resolved by installing facilities to secure their safety.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.34 no.6
• /
• pp.279-284
• /
• 2020

The theory of "eccentric diseases are generally due to phlegm (怪病多屬痰)" means that phlegm is a major cause for intractable diseases including cerebrovascular accident, depression, insanity, and shock from strange things or evil sprint. It has been a key foundation for the diagnosis and treatment of phlegm in traditional Korean medicine. However, the origin of the theory is not clear and controversial. In this study, we critically reviewed the origin and developing process of the theory in the viewpoints of philology and pathology in Korean medicine. Wang Yin-Jun (王隱 君) did not claim that eccentric diseases are generally due to phlegm in Taidingyangshengzhu-lun (泰定養生主論). The miscitation by following medical literature caused the misunderstanding in the meaning of Taidingyangshengzhu-lun, that phlegm can cause variable symptoms and signs. In the Ming dynasty, some poor medical doctors had tended to diagnose any difficult case as phlegm syndrome and to use Kuntan-huan (滾痰丸) as a standard herbal formula for treating phlegm syndrome. However, the tendency to categorize delicate cases easily to phlegm syndrome is not desirable. Besides, the tendency to use Kuntan-huan as a basic formula for the phlegm syndrome might cause diverse and severe adverse effects. Thus, we cannot accept the theory of eccentric diseases is generally due to phlegm without a doubt. In conclusion, this theory might be a valuable aphorism in terms of considering the possibility of the secondary pathologic factors including phlegm and blood stasis which should be considered first in case of intractable diseases.