• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.12 s.354
• /
• pp.53-60
• /
• 2006

Handover of WiBro is based on 802.16e hard handover scheme. When PSS is handover, it is handover that confirm neighbor's cell condition and RAS ID in neighbor advertisement message. Serving RAS transmits HO-notification message to neighbor RAS. Transmiting HO-notification message to neighbor RAS, it occurs many signaling traffics. Also, When WiBro is handover, It occurs many packet loss. Therefore, user suffer service degradation. LPM handover is supporting seamless handover because it buffers data packets during handover. So It is proposed scheme that predicts is LPM handover and reserves target RAS with pre-authentication. These schemes occur many signaling traffics. In this paper, we propose PSS Movement Prediction to solve signaling traffic. Target RAS is decided by old data in history cache. When serving RAS receives HO-notification-RSP message to target RAS, target RAS inform to crossover node. And crossover node bicast data packet. If handover is over, target RAS forward data packet. Therefore, It reduces signaling traffics but increase handover success rate. When history cache success, It decrease about 48% total traffic. But When history cache fails, It increase about 6% total traffic

• The KIPS Transactions:PartD
• /
• v.18D no.3
• /
• pp.157-168
• /
• 2011

Recently flash memory has been being utilized as a main storage device in mobile devices, and flashSSDs are getting popularity as a major storage device in laptop and desktop computers, and even in enterprise-level server machines. Unlike HDDs, on flash memory, the overwrite operation is not able to be performed unless it is preceded by the erase operation to the same block. To address this, FTL(Flash memory Translation Layer) is employed on flash memory. Even though the modified data block is overwritten to the same logical address, FTL writes the updated data block to the different physical address from the previous one, mapping the logical address to the new physical address. This enables flash memory to avoid the high block-erase cost. A flashSSD has an array of NAND flash memory packages so it can access one or more flash memory packages in parallel at once. To take advantage of the internal parallelism of flashSSDs, it is beneficial for DBMSs to request I/O operations on sequential logical addresses. However, the B-tree structure, which is a representative index scheme of current relational DBMSs, produces excessive I/O operations in random order when its node structures are updated. Therefore, the original b-tree is not favorable to SSD. In this paper, we propose AS(Always Sequential) B-tree that writes the updated node contiguously to the previously written node in the logical address for every update operation. In the experiments, AS B-tree enhanced 21% of B-tree's insertion performance.

• Journal of Information Processing Systems
• /
• v.2 no.1
• /
• pp.39-43
• /
• 2006

In this paper, we proposed TASL-MAC, a medium-access control (MAC) protocol for wireless sensor networks. In wireless sensor networks, sensor nodes are usually deployed in a special environment, are assigned with long-term work, and are supported by a limited battery. As such, reducing the energy consumption becomes the primary concern with regard to wireless sensor networks. At the same time, reducing the latency in multi-hop data transmission is also very important. In the existing research, sensor nodes are expected to be switched to the sleep mode in order to reduce energy consumption. However, the existing proposals tended to assign the sensors with a fixed Sleep/Listening schedule, which causes unnecessary idle listening problems and conspicuous transmission latency due to the diversity of the traffic-load in the network. TASL-MAC is designed to dynamically adjust the duty listening time based on traffic load. This protocol enables the node with a proper data transfer rate to satisfy the application's requirements. Meanwhile, it can lead to much greater power efficiency by prolonging the nodes' sleeping time when the traffic. We evaluate our implementation of TASL-MAC in NS-2. The evaluation result indicates that our proposal could explicitly reduce packet delivery latency, and that it could also significantly prolong the lifetime of the entire network when traffic is low.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.1
• /
• pp.131-143
• /
• 1996

In this paper, we propose the improved structure of fully interconnected ATM Switch to develop the small sized switch element and represent practical implementation of switch network. As the part II of the full study about structure and implementation of fully interconnected ATM Switch, this paper especially describes the implementation of an ATM switching element with 8 input port and 8 output port at 155 Mbits/sec each. The single board switching element is used as a basic switching block in a small sized ATm switch for ATM LAN Hub and customer access node. This switch has dedicated bus in 12 bit width(8 bit data + 4 bit control signal) at each input and output port, bit addressing and cell filtering scheme. In this paper, we propose a practical switch architecture with fully interconnected buses to implement a small-sized switch and to provide multicast function withoutany difficulty. The design of switching element has become feasible using advanced CMOS technology and Embedded Gate Array technology. And, we also represent Application Specific Integrated Circuit(ASIC) of Switch Output Multiplexing Unit(SOMU) and 12 layered Printed Circuit Board for interconnection network of switch.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.6B
• /
• pp.334-341
• /
• 2007

A Mobile IP is considered for the efficient mobility function in IEEE 802.16/WiBro environment. However, during the deployment of WiBro, only some of the ACRs(Access Control Router) can support the Mobile IP function. Therefore, a WiBro network can not support the mobility function for the mobile node. In this paper, we implement an overlay-based Mobile IP function and measure the performance through a field trial. Moreover, we evaluate the possibility of commercial deployment and suggest areas that need to be improved.

• Journal of Communications and Networks
• /
• v.11 no.2
• /
• pp.148-156
• /
• 2009

The fixed spectrum assignment policy in today's wireless networks leads to inefficient spectrum usage. Cognitive radio network is a new communication paradigm that enables the unlicensed users to opportunistically use the spatio-temporally unoccupied portions of the spectrum, and hence realizing a dynamic spectrum access (DSA) methodology. Interference temperature model proposed by Federal Communications Commission (FCC) permits the unlicensed users to utilize the licensed frequencies simultaneously with the primary users provided that they adhere to the interference temperature constraints. In this paper, we formulate two NP-hard optimal scheduling methods that meet the interference temperature constraints for cognitive radio networks. The first one maximizes the network throughput, whereas the second one minimizes the scheduling delay. Furthermore, we also propose suboptimal schedulers with linear complexity, referred to as maximum frequency selection (MFS) and probabilistic frequency selection (PFS). We simulate the throughput and delay performance of the optimal as well as the suboptimal schedulers for varying number of cognitive nodes, number of primary neighbors for each cognitive node, and interference temperature limits for the frequencies. We also evaluate the performance of our proposed schedulers under both additive white gaussian noise (AWGN) channels and Gilbert-Elliot fading channels.

• Journal of Korea Multimedia Society
• /
• v.15 no.12
• /
• pp.1464-1474
• /
• 2012

In this paper, we propose a QoS (Quality of Service)-aware and cooperative resource reservation scheme using cross-layer link adaptation for wireless high definition video transmission through UWB (Ultra Wide Band) network with D-MAC (Distributed Medium Access Control). A wireless high definition video transmission system usually requires stable high throughput even without line-of-sight, e.g., a destination device in another room separated by a wall. Since the WiMedia D-MAC supporting DRP (Distributed Reservation Protocol) scheme causes lots of DRP resource reservation conflicts due to failure of beacon detection in wireless channel environment, overall performances of the WiMedia D-MAC can be deteriorated. And the current WiMedia MAC standard has not considered QoS provisioning even though QoS parameters such as a range of service rates are provided to each traffic stream. Therefore, we propose Relay DRP protocol with QoS-based relay node selection criterion, which makes a relay path to avoid DRP resource reservation conflicts and guarantee QoS more stably through cross-layer link adaptation of cooperative relay transmission scheme and is compliant with the current WiMedia D-MAC protocol. Simulation results demonstrate performance improvements of the proposed method for throughput and QoS provisioning.

• ETRI Journal
• /
• v.35 no.5
• /
• pp.889-899
• /
• 2013

Wireless sensor networks (WSNs) are used for many real-time applications. User authentication is an important security service for WSNs to ensure only legitimate users can access the sensor data within the network. In 2012, Yoo and others proposed a security-performance-balanced user authentication scheme for WSNs, which is an enhancement of existing schemes. In this paper, we show that Yoo and others' scheme has security flaws, and it is not efficient for real WSNs. In addition, this paper proposes a new strong authentication scheme with user privacy for WSNs. The proposed scheme not only achieves end-party mutual authentication (that is, between the user and the sensor node) but also establishes a dynamic session key. The proposed scheme preserves the security features of Yoo and others' scheme and other existing schemes and provides more practical security services. Additionally, the efficiency of the proposed scheme is more appropriate for real-world WSNs applications.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.10
• /
• pp.2357-2375
• /
• 2013

Message ferry is a controllable mobile node with large capacity and rechargeable energy to collect information from the sensors to the sink in wireless sensor networks. In the existing works, route of the message ferry is often designed from the solutions of the Traveling Salesman Problem (TSP) and its variants. In such solutions, the ferry route is often a simple cycle, which starts from the sink, access all the sensors exactly once and moves back to the sink. In this paper, we consider a different case, where the ferry route is a closed walk that contains more than one simple cycle. This problem is defined as the Closed Walk Ferry Route Design (CWFRD) problem in this paper, which is an optimization problem aiming to minimize the average weighted delay. The CWFRD problem is proved to be NP-hard, and the Integer Linear Programming (ILP) formulation is given. Furthermore, a heuristic scheme, namely the Initialization-Split-Optimization (ISO) scheme is proposed to construct closed walk routes for the ferry. The experimental results show that the ISO algorithm proposed in this paper can effectively reduce the average weighted delay compared to the existing simple cycle based scheme.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.10
• /
• pp.4865-4886
• /
• 2017

The user experience of practical indoor power line communication (PLC) applications is greatly affected by the system quality-of-service (QoS) criteria. With a general broadcast-and-multi-access (BMA) relay scheme, in this work we investigate the joint source and relay power optimization of the amplify-and-forward (AF) relay systems used under indoor broad-band PLC environments. To achieve both time diversity and spatial diversity from the relay-involved PLC channel, which is time-varying in nature, the source node has been configured to transmit an identical message twice in the first and second signalling phase, respectively. The QoS constrained power allocation problem is not convex, which makes the global optimal solution is computationally intractable. To solve this problem, an alternating optimization (AO) method has been adopted and decomposes this problem into three convex/quasi-convex sub-problems. Simulation results show the fast convergence and short delay of the proposed algorithm under realistic relay-involved PLC channels. Compared with the two-hop and broadcast-and-forward (BF) relay systems, the proposed general relay system meets the same QoS requirement with less network power assumption.