• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.10
• /
• pp.1428-1432
• /
• 2002

Thirty-six (20 wethers and 16 rams) adult Gansu highland finewool sheep with an average liveweight of $19.42{\pm}1.83kg$ were used. The sheep were allocated to 4 treatments and confined in individual feeding stalls. The 80 day feeding trial was divided into 2 periods of 38 and 42 days. The sheep had access to clean water and were fed chopped wheat straw ad libitum. Daily supplemented diets of 150 g for the first period and 200 g for the later period were provided. The 4 types of supplements were: Wheat bran type (I), which is the traditional feeding practice in the area and the control group; Linseed cake type (II); Linseed cake+poultry litter type (III); Poultry litter+distiller grains type (IV). The digestibility trial was conducted using a total collection method at the end of the first period in the feeding trial. The results showed that the digestibilities of DM, OM, CP, CF, NDF and ADF in group II and III were increased to more than 50%. CP and NDF digestibility in group II were significantly increased by 23.6% and 25.5% respectively over group I (p<0.01) and by 10.1% and 13.1% respectively over group III (p<0.05). The digestibility of DM, OM, CP, CF, NDF and ADF in group IV was lower than group I by 4.4 to 8.4% (p>0.05). Compared to group I, group II and III increased straw intake by 17.6% (p<0.01) and 10.8% (p<0.05). The ADG increased from 16.2 g in group I to 45.3 g and 32.8 g (p<0.01) in group II and III respectively. The ratio of supplement intake to gain decreased from 10.7 in group I to 3.9 and 5.4 (p<0.01) in group II and III respectively. The ratio of supplement cost to gain also decreased by 60.0% and 64.3%, respectively. The wool growth rate and wool strength in these 2 groups were noticeably improved. This significantly enhanced the wool's textile value. The above parameters in group IV were lower than in group I, except the ratio of supplement cost to gain. This research indicates that local low quality nitrogen resources could be used effectively and economically to improve the utilization of wheat straw fed to sheep on smallholder farms under harsh loess plateau conditions in the winter.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.3
• /
• pp.97-107
• /
• 2017

In the field of automatic door, the infrared rays and microwave sensor are much used as the important components in charge of the motor's operation control of open and close through the incoming signal of object recognition. In case of existing system that the sensor of the infrared rays and microwave are applied to the automatic door, there are many malfunctions by the infrared rays and visible rays of the sun. Because the automatic doors are usually installed outside of building in state of exposure. The environmental change by temperature difference occurs the noise of object recognition detection signal. With this problem, the hardware fault that the detection sensor is unable to follow the object moving rapidly within detection area makes the sensing blind spot. This fault should be improved as soon as possible. Because It influences safety of passengers who use the automatic doors. This paper conducted an experiment to improve the detection area by installing extra ultrasonic sensor besides existing detection sensor. So, this paper realize the computing circuit and detection algorithm which can correctly and rapidly process the access route of objects moving fast and the location area of fixed obstacles by applying detection and advantages of ultrasonic signal to the automatic doors. With this, It is proved that the automatic door applying ultrasonic sensor is improved detection area of blind spot sensing through field test and improvement plan is proposed.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.5
• /
• pp.39-48
• /
• 2016

One of the major trends of automotive networking architecture is the introduction of automotive Ethernet. Ethernet is already used in single automotive applications (e.g. to connect high-data-rate sources as video cameras), it is expected that the ongoing standardization at IEEE (IEEE802.3bw - 100BASE-T1, respectively IEEE P802.3bp - 1000BASE-T1) will lead to a much broader adoption in future. Those applications will not be limited to simple point-to-point connections, but may affect Electric/Electronic(EE) Architectures as a whole. It is agreed that IP based traffic via Ethernet could be secured by application of well-established IP security protocols (e.g., IPSec, TLS) combined with additional components like, e.g., automotive firewall or IDS. In the case of safety and real-time related applications on resource constraint devices, the IP based communication is not the favorite option to be used with complicated and performance demanding TLS or IPSec. Those applications will be foreseeable incorporate Layer-2 based communication protocols as, e.g., currently standardized at IEEE[13]. The present paper reflects the state-of-the-art communication concepts with respect to security and identifies architectural challenges and potential solutions for future Ethernet Switch-based EE-Architectures. It also gives an overview and provide insights into the ongoing security relevant standardization activities concerning automotive Ethernet. Furthermore, the properties of non-automotive Ethernet security mechanisms as, e.g., IEEE 802.1AE aka. MACsec or 802.1X Port-based Network Access Control, will be evaluated and the applicability for automotive applications will be assessed.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.4
• /
• pp.69-74
• /
• 2010

A new package substrate for dynamic random access memory(DRAM) devices has been developed using selective aluminum anodization. Unlike the conventional substrate structure commonly made by laminating epoxy-based core and copper clad, this substrate consists of bottom aluminum, middle anodic aluminum oxide and top copper. Anodization process on the aluminum substrate provides thick aluminum oxide used as a dielectric layer in the package substrate. Placing copper traces on the anodic aluminum oxide layer, the resulting two-layer metal structure is completed in the package substrate. Selective anodization process makes it possible to construct a fully filled via structure. Also, putting vias directly in the bonding pads and the ball pads in the substrate design, via in pad structure is applied in this work. These arrangement of via in pad and two-layer metal structure make routing easier and thus provide more design flexibility. In a substrate design, all signal lines are routed based on the transmission line scheme of finite-width coplanar waveguide or microstrip with a characteristic impedance of about $50{\Omega}$ for better signal transmission. The property and performance of anodic alumina based package substrate such as layer structure, design method, fabrication process and measurement characteristics are investigated in detail.

• Journal of Digital Convergence
• /
• v.13 no.4
• /
• pp.227-233
• /
• 2015

The recent health care is growing rapidly want to receive offers users a variety of medical services, can be exploited easily exposed to a third party information on the role of the patient's hospital staff (doctors, nurses, pharmacists, etc.) depending on the patient clearly may have to be classified. In this paper, in order to ensure safe use by third parties in the health care environment, classify the attributes of patient information and patient privacy protection technique using hierarchical multi-property rights proposed to classify information according to the role of patient hospital officials The. Hospital patients and to prevent the proposed method is represented by a mathematical model, the information (the data consumer, time, sensor, an object, duty, and the delegation circumstances, and so on) the privacy attribute of a patient from being exploited illegally patient information from a third party the prevention of the leakage of the privacy information of the patient in synchronization with the attribute information between the parties.

• Journal of Convergence for Information Technology
• /
• v.7 no.3
• /
• pp.27-36
• /
• 2017

In almost industries, such as the logistics industry, marine fisheries, agriculture, industry, and services, small unmanned aerial vehicles are used for aerial photographing or closing flight in areas where human access is difficult or CCTV is not installed. Also, based on the information of small unmanned aerial photographing, application research is actively carried out to efficiently perform surveillance, control, or management. In order to carry out tasks in a mission-based manner in which the set tasks are assigned and the tasks are automatically performed, the small unmanned aerial vehicles must not only fly steadily but also be able to charge the energy periodically, In addition, the unmanned aircraft need to land automatically and precisely at certain points after the end of the mission. In order to accomplish this, an automatic precision landing method that leads landing by continuously detecting and recognizing a marker located at a landing point from a video shot of a small UAV is required. In this paper, it is shown that accurate and stable automatic landing is possible even if simple template matching technique is applied without using various recognition methods that require high specification in using low cost general purpose small unmanned aerial vehicle. Through simulation and actual experiments, the results show that the proposed method will be made good use of industrial fields.

• Journal of Engineering Education Research
• /
• v.10 no.3
• /
• pp.79-92
• /
• 2007

To enhance the excellence, effectiveness and economical efficiency in the learning process, we implement a hybrid educational system for engineering experiments where web-based virtual laboratory systems and distance education systems are properly integrated. In the first stage, we designed client/server distributed environment and developed web-based virtual laboratory systems for digital systems and electrical/electronic circuit experiments. The proposed virtual laboratory systems are composed of four important sessions and their management system: concept learning session, virtual experiment session, assessment session. With the aid of the management system every session is organically tied up together to achieve maximum learning efficiency. In the second stage, we have implemented efficient and cost-effective distant laboratory systems for practicing electric/electronic circuits, which can be used to eliminate the lack of reality occurred during virtual laboratory session. The use of simple and user-friendly design allows a large number of people to access our distant laboratory systems easily. Thus, self-guided advanced training is available even if a lot of expensive equipment will not be provided in the on-campus laboratories. The proposed virtual/distant laboratory systems can be used in stand-alone fashion, but to enhance learning efficiency we integrated them and developed a hybrid educational system for engineering experiments. Our hybrid education system provides the learners with interactive learning environment and a new approach for the delivery of engineering experiments.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.5
• /
• pp.25-37
• /
• 2010

This study is aimed at enhancing mobility rights for the transportation underprivileged that has been made light of relatively compared to normal people. In order to do this, we've suggested having ITS (Intelligent Traffic System) built and improving satisfaction through the test operation of its main system. The existing sound signal device for the visually handicapped has one problem with managing it. Because, the people in charge of it had to visit each problematic site directly to maintain and fix some problems every time it was out of order. Moreover, it couldn't provide sustainable services about voice guidance and the visually handicapped had to control it by either confirming the location of buttons that were installed on the pillar of traffic light and then pressing one of them or using a remote controller on their own. In order to improve such inconveniences, we have created a new typed sound signal device for the visually handicapped by applying the cutting-edge wireless technology based on ergonomics considering actual road situations. Such technology enables it report the status of signal device and light to them by using its voice guidance system automatically every time they have access to it. Additionally, we've already introduced it to a couple of test areas and then known the fact that they recognized traffic situation more conveniently and safely compared to the existing sound signal device. That is above average in terms of satisfaction. In addition to that, we've provided LTS (Location Tracking System - Location-based service intended for elementary students) by utilizing the existing wireless infrastructure and founded the fact that about 87% of their parents were satisfied with the service based on LTS.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.5 no.4
• /
• pp.93-105
• /
• 2002

In this paper forest fire status information management system was developed under web environment using web GIS(geographic information system) technology. Though this system, general users can easily retrieval domestic forest fire status information and obtain that in visual way such as maps, graphs, and texts if they have only certain web browsers. Moreover, officials, who have system access authority, can easily control and manage all domestic forest fire status information through input interface, retrieval interface, and out interface of the system. This system can be considered as the first domestic system to manage forest fire status data and service them in visual through user friendly interfaces on web. In order to implement this system, IIS 5.0 of Microsoft is used as web server and Oracle 8i and ASP(active server page) are used for database construction and dynamic web page operation, respectively. Also, ArcGIS IMS(internet map server) of ESRI is used to serve maps by using Java and HTML as system development languages. Not only the domestic tendency of forest fire but also the forest fire status information of certain area and time such as the frequency and the loss can be presented through distribution maps, graphs and tables. Therefore, this system is supposed to play as a important role when the policy relate to domestic forest fire is established. In addition, the self consciousness of people against forest fire can be inspired and the foundation of scientific and systemic forest fire services can be obtained through this system in the future.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.11
• /
• pp.1642-1650
• /
• 2008

The objective of this study was to assess the effect of clinoptilolite (a natural zeolite) on growth and performance of broilers as well as on the quality of their litter. A total of 5,200 one-day old broiler chickens (Cobb 500) were used in two consecutive rounds lasting 42 days each. The broilers were given free and continuous access to a nutritionally non-limiting diet (in meal form) that was either a basal diet (B) or a 'zeolite diet' (Z; the basal diet supplemented with clinoptilolite at a level of 2%). A $2{\times}2$ factorial design consisted of two feeding treatments (B and Z) and two bedding types, sawdust (S) and sawdust with zeolite (Sz, which was the result of adding $2kg\;zeolite/m^2$), was used. In each round the broilers were randomly assigned to one of four (n = 650), treatment groups: two fed on the basal diet (B) and had bedding of either sawdust (group BS) or sawdust and zeolite (group BSz) and two fed on the Z diet and had as bedding either sawdust (ZS) or sawdust and zeolite (ZSz). Average growth rates were significantly (p<0.05) different between broilers of different groups; broilers that were fed on the 'zeolite diet' (Z) and were placed either in a compartment with sawdust bedding or sawdust bedding and zeolite (ZS and ZSz) as well those that were fed on the basal diet in a compartment with sawdust bedding and zeolite (BSz) grew at a faster rate (p<0.05) compared with those of the control group (BS). The incorporation of NZ in broilers diets and in their bedding material decreased the organic content in litter samples throughout the experimental period. The lowest organic content was recorded in group ZSz where NZ was added in both feed and litter. Mean ammonia concentration (ppm) was significantly higher in group ZS in comparison to groups BSz and ZSz (27.00 vs. 20.55 and 21.71 respectively). The results of this study showed that the incorporation of the clinoptilolite both in feed and into the litter had a positive effect on broiler growth and also on the quality of their litter.