• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.567-570
• /
• 2009

The present study conducted comparative evaluation of wet dry floor heating systems using geothermal heat pump. Circulation hot water from geothermal heat pump which is $10{\sim}15^{\circ}C$ lower than that from boiler was used. In order to access indoor temperature ($25^{\circ}C$) it took 74 minutes for dry type and 247 minutes for wet type. Average floor temperature was $23.89^{\circ}C$ for wet type and $32.66^{\circ}C$ for dry type. Energy saving rate gradually increased by 66% after 138 minutes. In the results, for floor heating system using low temperature circulation water, wet type was not enough to meet stable and comfortable radiant floor heating due to low floor temperature and access time to indoor set temperature. While dry type was practicable for stable floor heating due to fast rise of indoor set temperature and comfortable floor temperature.

• 신재생에너지
• /
• 제5권4호
• /
• pp.60-65
• /
• 2009

The present study was conducted for a comparative evaluation of wet and dry floor heating systems using geothermal heat pump. We circulated hot water from geothermal heat pump which is $10{\sim}15^{\circ}C$ lower than that from boiler. In order to access indoor temperature ($25^{\circ}C$) it took 74 minutes for dry type and 247 minutes for wet type. Average floor temperature was $23.9^{\circ}C$ for wet type and $32.7^{\circ}C$ for dry type. Energy saving rate gradually increased by 66% after 138 minutes. As a result, in case of floor heating system using low temperature circulation water, dry type was more practicable for stable floor heating than wet type in terms of floor temperature and access time to indoor set temperature.

• Journal of Communications and Networks
• /
• 제5권4호
• /
• pp.354-364
• /
• 2003

A general method for the evaluation of the symbol error probability (SER) of ultra wideband (UWB) systems with various kind of modulation schemes (N-PAM, M-PPM, Bi-Orthogonal), in presence of multipath channel, multiuser and strong narrowband interference, is presented. This method is shown to be able to include all the principal multiaccess techniques proposed so far for UWB, time hopping (TH), direct sequence (DS) and optical orthogonal codes (OOC). A comparison between the performance of these multiple access and modulation techniques is given, for both ideal Rake receiver and minimum mean square error (MMSE) equalizer. It is shown that for all the analyzed multiple access schemes, a Rake receiver exhibits a high error floor in presence of narrowband interference (NBI) and that the value of the error floor is in-fluenced by the spectral characteristics of the spreading code. As expected, an MMSE receiver offers better performance, representing a promising candidate for UWB systems. When the multiuser interference is dominant, all multiple access techniques exhibit similar performance under high-load conditions. If the number of users is significantly lower than the spreading factor, then DS outperforms both TH and OOC. Finally 2PPM is shown to offer better performance than the other modulation schemes in presence of multiuser interference; increasing the spreading factor is proposed as a more effective strategy for SER reduction than the use of time diversity.

• 한국산업안전학회:학술대회논문집
• /
• 한국안전학회 2001년도 공동학술대회
• /
• pp.31-35
• /
• 2001

Recent trends require that access to the device/equipment information be provided from several locations or anywhere in the enterprise. One example is virtual machine/manufacturing system (VMS) where predictive maintenance is performed both on factory floor and in remote site through internet ［1］. Internet access is increasingly available and affordable, and along with the "internet" is the backbone of modern enterprise data networks. Typical functions of such a system includes monitoring and control for diagnosis and remedy action in realizing preventive maintenance.(omitted)

• 대한전자공학회논문지TC
• /
• 제41권11호
• /
• pp.1-7
• /
• 2004

본 논문에서는 다중 안테나를 사용한 다중 반송파 대역확산 다중접속 (MIMO MC-CDMA) 시스템을 위한 다단계 병렬 널링 및 병렬 부분 간섭 제거 수신기 (MPN-PPIC)를 제안한다. 기존의 V-BLAST 수신기는 널리 알려져 있는 다중 안테나 시스템에 대한 수신 방법으로, 단일 사용자 하향 링크 다중 안테나 MC-CDMA 시스템에 대해서는 어느 정도 좋은 성능을 보이지만, 다중 사용자의 경우에 있어서는 심각한 성능 저하 (error floor)를 보이는 것으로 알려져 있다. 본 논문에서 제안한 수신기는 다중 사용자 환경에서 이러한 성능 저하를 보이지 않으며, 다단계 연산을 통해서 보다 더 나은 성능을 얻을 수 있다. 또한, 제안한 방법은 chip interleaving을 하는 경우, 다단계 연산을 통해 단일 사용자 환경에 대해서도 V-BLAST보다 더 나은 성능을 보인다. 제안한 방법에 대한 이와 같은 성능은 컴퓨터 모의 실험을 통해서 확인해 본다.

• 한국가금학회지
• /
• 제39권4호
• /
• pp.261-267
• /
• 2012

Different housing systems have considerable influence on performance in poultry production. Therefore, the present study was undertaken to investigate the impact of different housing systems on the performance, bone mineral density and egg yolk fatty acid composition in laying hen. Hy-line brown pullets (n=450) of 12 weeks age were randomly divided into 3 housing systems with 6 replicates of 25 birds in each room. A diet with 2,750 kcal/kg ME and 16.5% CP was assigned to all birds. The pullets provided free access to feed and water. Significantly (P<0.05) higher values for egg production, egg mass and feed conversion efficiency were found in battery cages, however egg weight, egg shell color and breaking strength was remarkably (P<0.05) higher in floor system. The albumin height and Haugh unit were significantly higher (P<0.05) in battery cages which was statistically similar to aviary housing system. The egg yolk fatty acids concentration of linoleic acid and linolenic acids were significantly higher in aviary and in floor system, respectively, however both values were lower in battery cages. Saturated and unsaturated fatty acid content (%) in egg yolk did not influence by any housing systems. Bone mineral density was significantly higher (P<0.05) in floor and aviary housing system than that of battery cage system. It was concluded that in battery cages the egg production and composition maximized, however higher bone mineral density and yolk fatty acids content can be improved in the laying hen reared on floor and aviary housing systems.

• 한국ITS학회 논문지
• /
• 제22권6호
• /
• pp.66-76
• /
• 2023

최근 정부는 교통약자의 이동권 보장 및 증진을 위한 다양한 정책들을 시행하고 있다. 하지만 광역 대중교통 관점에서 바라본 교통약자의 이동권은 아직 미흡한 상황이다. 현재 대부분의 신도시 지역은 도시철도 노선이 부족하고, 고상 버스 중심의 광역교통망 확충이 이루어지고 있으며, 휠체어 이용자의 지역 간 이동을 위한 버스는 현재 2층 저상 좌석버스가 유일하다. 이에 본 연구에서는 저상 좌석버스 도입에 대한 사업의 필요성과 당위성 제시를 목표로 이용자의 지불의사금액을 조건부가치측정법을 통해 추정하였다. 지불의사 유도방법에는 개방형과 양분선택형 질문방식을 채택하였다. 지불의사금액 추정을 위해 이항로짓모형을 활용하였으며, 그 결과 일반인은 126.7원, 교통약자는 117.5원을 추가 지불할 의사가 있는 것으로 분석되었고, 이를 연간 경제적 편익으로 환산 시 약 350억원으로 산출되었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.308-308
• /
• 2000

In case of fire in the high-rise buildings, the appropriate and safe evacuation plans for the building residents are very important to minimize the number of casualties. Since the evacuation time usually depends on the floor plans of the buildings, the evacuation plans should be considered while the architectural design is done. Conventionally, the calculation of the evacuation time in the case of fire breakout is based on the approximate mathematical equations which are prone to error In this study, the simulator model is developed to help the architectural designers to access the more accurate evacuation time and find out the floor plans which offers the most safe evacuation plans for the residents in case of fire.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2006년도 한국컴퓨터종합학술대회 논문집 Vol.33 No.1 (A)
• /
• pp.250-252
• /
• 2006

Web technologies are gaining increased importance in automation and control systems. However, the choice of Web technologies depends on the use cases in the application environment. In industrial systems, the data can be got not only from many different field systems and devices but also from different OPC (OLE for Process Control) Servers. Current OPC Client might be able to read simple data from OPC Server, but there are some problems to get structured data and to exchange structured information between collaborating applications. Therefore, OPC Foundation has defined interfaces to OPC XML-DA (OPC XML Data Access) and OPC Complex Data that aim to solve those problems. The OPC XML-DA can facilitate the exchange of plant data across the internet, and upwards into the enterprise domain. In addition, the OPC Complex Data will extend the OPC DA specification to allow the OPC Client to read and decode any type of data from measurement and control systems on the plant floor. This paper will describe the concept of OPC XML-DA and OPC Complex Data. And then it proposes a mechanism to implement the OPC Complex Data into OPC XML-DA Server. Additionally, the paper also discusses the security aspects.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.849-854
• /
• 2003

The Korea Atomic Energy Research Institute has developed a teleoperated cleaning robot for use in the radioactive zone of the isolation room of the Irradiated Material Examination Facility where direct human access to the interior is strictly limited. The teleoperated cleaning robot that was designed to completely eliminate human interaction with the hazardous radioactive contaminants has five remotely replaceable submodules - a mobile module for navigation, a cleaning module for dislodging and sucking contaminated waste, a sensing module for obstacle avoidance, a collection module for storing the acquired waste, and a cover module for protecting the collection module. This cleaning robot is capable of cleaning the contaminated floor surface of the isolation room and collecting loose dry spent nuclear fuel debris and other radioactive waste fixed or scattered on the floor surface. The developed cleaning robot is operated either by a manual control or by autonomous control in conjunction with a graphical simulator, by which the human operator can monitor and intervene the robot performing cleanup tasks in the isolation room. In this paper, we present the mechanical and environmental design considerations and development of the teleoperated cleaning robot for radioactive isolation room use. We also demonstrate its mock-up performance test results from the viewpoint of a remote cleanup operation and remote maintenance.