• 제목/요약/키워드: Acceptable limits

검색결과 234건 처리시간 0.028초

지산통(芝山統)의 토양특성(土壤特性) 범위(範圍) 검정(檢定) (Test of Official Range in Characteristics for Jisan Soil Series)

  • 정석재;박창서;현근수;문준;엄기태
    • 한국토양비료학회지
    • /
    • 제22권2호
    • /
    • pp.81-85
    • /
    • 1989
  • 우리나라의 답토양중(畓土壤中) 분포면적(分布面積)이 가장 넓은(전국(全國) 113개(個) 지역(地域)에서 작도(作圖)되었음) 지산통(芝山統)의 지역별(地域別) 대표단면(代表斷面)을 가지고 토양(土壤) 설정시(設定時) 정의(定義)된 사양특성(士壤特性)의 허용설정(許容設定) 범위(範圍)와 정확도(正確度)를 분석(分析)하였다. 1. 표토(表土)의 특성(特性) 평균치(平均値)는 층위(層位)두께에서 23.2cm, 토성(土性) 양토(壤土) pH 5.7 그리고 염기포화도(鹽基飽和度) 64%로 모두 설정범위내(設定範圍內)에 속(屬)하였다. 2. 심토(心土)의 특성(特性)도 평균치(平均値)는 층위(層位)두께에서 64.0cm, 점토함량(粘土含量) 23.8%, 토성(土性) 양토(壤土), pH6.2 그리고 염기포화도(鹽基飽和度) 73 %로 있었고 기층(基層)의 경우에도 특성(特性) 평균치(平均値)는 모두 설정범위내(說定範圍內)에 있었다. 3. 유효토심(有效土深)과 평균치(平均値)는 87.2cm 그리고 층위조성(層位組成)은 A-B-C 층위(層位)로 허용설정(許容設定) 범위내(範圍內)에 존재(存在)하였다. 4. 심토(心土)의 정확도(正確度)는 0.687~0.929 범위내(範圍內)에 있었으며, 유효토심(有效土深)과 층위조성(層位造成)의 정확도(正確度)는 각각(各各) 0.723 및 0.920이었다.

  • PDF

위해성평가에 근거한 농산물 중 22종 농약의 잔류허용기준설정 (Establishment of 22 Pesticide MRLs in Agricultural Products based on Risk Assessment)

  • 정형욱;하용근;임무혁;신지은;도정아;오재호;조재호;권기성;박선희
    • 한국환경농학회지
    • /
    • 제30권2호
    • /
    • pp.166-172
    • /
    • 2011
  • 본 연구를 통해 신규농약인 isotianil의 쌀에 대한 잔류허용기준과, 기준이 확대되는 21종 농약에 대해 26개의 농약잔류허용기준을 제시하였다. Iisotianil의 쌀에 대한 MRL은 0.1 mg/kg으로 설정하였고, ADI대비 TMDI의 비율 1.54%로 안전한 수준으로 판단된다. 기준이 확대되는 21종의 농약의 경우 dinotefuran, idoxacarb, trifumizole을 제외한 나머지 농약은 ADI대비 TMDI의 비율이 50% 미만으로 안전성에 문제가 없는 수준으로 판단된다. Trifumizole은 재평가를 통해 미등록된 작물의 기준을 폐지하면, 현재의 ADI대비 TMDI 비율 절반 수준인 30% 미만으로 감소될 것으로 예측된다.

수소-LPG 복합충전소 정량적 위험성평가에 관한 연구 (A Study on the Quantitative Risk Assessment of Hydrogen-LPG Combined Refueling Station)

  • 강승규
    • 에너지공학
    • /
    • 제28권4호
    • /
    • pp.29-34
    • /
    • 2019
  • 본 연구에서는 수소 복합충전소에 대하여 정량적 위험성 평가를 실시하였다. 평가대상의 복합충전소는 수소-LPG이며 각 충전소의 설비 구성을 분석하고 위험도를 평가하였다. 최종 위험도는 피해영향과 사고빈도를 고려한 개인적 위험성과 사회적 위험성으로 평가한다. 본 연구의 대상이 된 수소-LPG 충전소에 대한 개인적 위험도 산출 결과, 수소-LPG 형태의 복합충전소는 HSE에서 제안하고 있는 허용 불가수준의 위험지역(> 1×10E-3)은 나타나고 있지 않으며, 작업자와 일반인에 대한 개인적 위험수준이 모두 허용범위 내에 분포하고 있다. 그리고 사회적 위험도 평가에서는 해석대상 모델이 허용 가능한 범위(ALARP, As Low As Reasonably Practicable)의 위험도 분포를 보이고 있다. 보다 향상된 안전성 확보를 위해 위험도 순위화 결과에서 높은 위험도를 보이고 있는 수소 저장용기, 디스펜서, 튜브트레일러 누출 및 LPG의 Vapour 회수 라인 등에 대한 정기적인 점검 및 확인을 권장한다.

Investigating the effects of span arrangements on DDBD-designed RC buildings under the skew seismic attack

  • Alimohammadi, Dariush;Abadi, Esmaeel Izadi Zaman
    • Structural Engineering and Mechanics
    • /
    • 제77권1호
    • /
    • pp.115-135
    • /
    • 2021
  • This paper focuses on examining the effects of span arrangements on displacement responses of plan-symmetric RC frame buildings designed using the direct displacement-based design (DDBD) method by employing non-linear analyses and the skew seismic attack. In order to show the desired performance of DDBD design approach, the force-based design approach is also used to examine the seismic performance of the selected structures. To realize this objective, 8-story buildings with different plans are selected. In addition, the dynamic behavior of the structures is evaluated by selecting 3, 7, and 12-story buildings. In order to perform non-linear analyses, OpenSees software is used for modeling buildings. Results of an experimental model are used to validate the analytical model implemented in OpenSees. The results of non-linear static and non-linear dynamic analyses indicate that changing span arrangements does not affect estimating the responses of structures designed using the DDBD approach, and the results are more or less the same. Next, in order to apply the earthquake in non-principle directions, DDBD structures, designed for one-way performance, are designed again for two-way performance. Time history analyses are performed under a set of artificial acceleration pairs, applied to structures at different angles. It is found that the mean maximum responses of earthquakes at all angles have very good agreement with the design-acceptable limits, while the response of buildings along the height direction has a relatively acceptable and uniform distribution. Meanwhile, changes in the span arrangements did not have a significant effect on displacement responses.

수산물 조리 식품에 함유된 수용성 비타민 함량 (Water-Soluble Vitamins Contents in Seafood-Based Dishes)

  • 김나은;김영화
    • 한국식품영양학회지
    • /
    • 제33권4호
    • /
    • pp.390-398
    • /
    • 2020
  • The purpose of this study was to determine the contents of water-soluble vitamins B1 (thiamine), B2 (riboflavin), B3 (niacin) and B12 (cyanocobalamin) in seafood-based dishes by using the high-performance liquid chromatography with the ultra violet and fluorescence detector. The vitamin B1, B2, B3 and B12 contents were analyzed in 29 seafood-based dishes. The method validation was performed on the method to determine the linearity, accuracy, limits of quantification, limits of detection and precision for vitamin B1, B2, B3 and B12. An excellent linearity range (R2=0.999~1.000) in the calibration curve for the water-soluble vitamins was observed. All analytical methods for the water-soluble vitamins showed the acceptable accuracy (89.4~119.7% recovery) and the precision (0.6~4.8% repeatability and 1.0~4.2% reproducibility). The highest content of vitamin B1 was 2.646 mg/100 g in the kkongchi-jorim, and the highest contents of vitamin B2, B3 and B12 were 0.370 mg/100 g, 10.971 mg/100 g, and 17.193 ㎍/100 g, respectively, in the kkongchi-gui. Our results provide reliable data on the contents of the water-soluble vitamins of seafood-based dishes in Korea.

각종 시설물 전원계통의 전압과 전류고조파 실태 (Actual Conditions of Voltage and Current Harmonics on Low-voltage Power Systems Supplying Various Facilities)

  • 이복희;백영환
    • 조명전기설비학회논문지
    • /
    • 제19권4호
    • /
    • pp.62-70
    • /
    • 2005
  • 본 연구는 각종 부하에 전력을 공급하고 있는 저압 전원계통에 나타나는 전압과 전류고조파의 실태조사에 관한 것으로 22.9[kV]/380[V]/220[V] 수전용 변압기 2차측 모선에서 측정하고, 그 결과를 IEEE와 IEC의 고조파 제한규격과 비교하여 검토하였다. 본 연구 대상의 전원선의 전압 종합왜형률은 적정수준으로 $5[\%]$이하이었다. 이에 반하여 전류왜형은 전압보다 매우 크게 나타났으며, 전류고조파는 전압고조파보다 훨씬 크게 나타났으며, 전류고조파 왜형율은 $15.7\~60.4[\%]$로 매우 넓은 범위에 분포되어 있다. 특히 개인용 컴퓨터와 형광조명을 주로 사용하는 사무용 건물의 전원선 전류왜곡은 공장의 부하전류의 왜곡에 비해 심하게 나타났다. 본 연구 조사 대상의 전원선 고조파 실태에서 전압고조파는 IEEE와 IEC규격의 제한값 이내이었지만 전류고조파는 이들 규격의 제한을 훨씬 초과하는 것으로 나타났다.

Human-Induced Vibrations in Buildings

  • Wesolowsky, Michael J.;Irwin, Peter A.;Galsworthy, Jon K.;Bell, Andrew K.
    • 국제초고층학회논문집
    • /
    • 제1권1호
    • /
    • pp.15-19
    • /
    • 2012
  • Occupant footfalls are often the most critical source of floor vibration on upper floors of buildings. Floor motions can degrade the performance of imaging equipment, disrupt sensitive research equipment, and cause discomfort for the occupants. It is essential that low-vibration environments be provided for functionality of sensitive spaces on floors above grade. This requires a sufficiently stiff and massive floor structure that effectively resists the forces exerted from user traffic. Over the past 25 years, generic vibration limits have been developed, which provide frequency dependent sensitivities for wide classes of equipment, and are used extensively in lab design for healthcare and research facilities. The same basis for these curves can be used to quantify acceptable limits of vibration for human comfort, depending on the intended occupancy of the space. When available, manufacturer's vibration criteria for sensitive equipment are expressed in units of acceleration, velocity or displacement and can be specified as zero-to-peak, peak-to-peak, or root-mean-square (rms) with varying frequency ranges and resolutions. Several approaches to prediction of floor vibrations are currently applied in practice. Each method is traceable to fundamental structural dynamics, differing only in the level of complexity assumed for the system response, and the required information for use as model inputs. Three commonly used models are described, as well as key features they possess that make them attractive to use for various applications. A case study is presented of a tall building which has fitness areas on two of the upper floors. The analysis predicted that the motions experienced would be within the given criteria, but showed that if the floor had been more flexible, the potential exists for a locked-in resonance response which could have been felt over large portions of the building.

Quantitative aspects of the hydrolysis of ginseng saponins: Application in HPLC-MS analysis of herbal products

  • Abashev, Mikhail;Stekolshchikova, Elena;Stavrianidi, Andrey
    • Journal of Ginseng Research
    • /
    • 제45권2호
    • /
    • pp.246-253
    • /
    • 2021
  • Background: Ginseng is one of the most valuable herbal supplements. It is challenging to perform quality control of ginseng products due to the diversity of bioactive saponins in their composition. Acid or alkaline hydrolysis is often used for the structural elucidation of these saponins and sugars in their side chains. Complete transformation of the original ginsenosides into their aglycones during the hydrolysis is one of the ways to determine a total saponin group content. The main hurdle of this approach is the formation of various by-products that was reported by many authors. Methods: Separate HPLC assessment of the total protopanaxadiol, protopanaxatriol and ocotillol ginsenoside contents is a viable alternative to the determination of characteristic biomarkers of these saponin groups, such as ginsenoside Rf and pseudoginsenoside F11, which are commonly used for authentication of P. ginseng Meyer and P. quinquefolius L. samples respectively. Moreover, total ginsenoside content is an ideal aggregated parameter for standardization and quality control of ginseng-based medicines, because it can be directly applied for saponin dosage calculation. Results: Different hydrolysis conditions were tested to develop accurate quantification method for the elucidation of total ginsenoside contents in herbal products. Linearity, limits of quantification, limits of detection, accuracy and precision were evaluated for the developed HPLC-MS method. Conclusion: Alkaline hydrolysis results in fewer by-products than sugar elimination in acidic conditions. An equimolar response, as a key parameter for quantification, was established for several major ginsenosides. The developed approach has shown acceptable results in the analysis of several different herbal products.

토모테라피에서 선량품질보증 분석을 위한 통계적공정관리의 타당성 (Feasibility on Statistical Process Control Analysis of Delivery Quality Assurance in Helical Tomotherapy)

  • 장경환
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제45권6호
    • /
    • pp.491-502
    • /
    • 2022
  • The purpose of this study was to retrospectively investigate the upper and lower control limits of treatment planning parameters using EBT film based delivery quality assurance (DQA) results and to analyze the results of statistical process control (SPC) in helical tomotherapy (HT). A total of 152 patients who passed or failed DQA results were retrospectively included in this study. Prostate (n = 66), rectal (n = 51), and large-field cancer patients, including lymph nodes (n = 35), were randomly selected. The absolute point dose difference (DD) and global gamma passing rate (GPR) were analyzed for all patients. Control charts were used to evaluate the upper and lower control limits (UCL and LCL) for all the assessed treatment planning parameters. Treatment planning parameters such as gantry period, leaf open time (LOT), pitch, field width, actual and planning modulation factor, treatment time, couch speed, and couch travel were analyzed to provide the optimal range using the DQA results. The classification and regression tree (CART) was used to predict the relative importance of variables in the DQA results from various treatment planning parameters. We confirmed that the proportion of patients with an LOT below 100 ms in the failure group was relatively higher than that in the passing group. SPC can detect QA failure prior to over dosimetric QA tolerance levels. The acceptable tolerance range of each planning parameter may assist in the prediction of DQA failures using the SPC tool in the future.

쑥갓 및 참나물 중 Lufenuron의 생산단계 잔류허용기준 설정을 위한 잔류 특성 연구 (Residual Characteristics of Lufenuron in Crown Daisy and Chamnamul for Establishing Pre-Harvest Residue Limit)

  • 오아연;반선우;장희라
    • 한국환경농학회지
    • /
    • 제42권1호
    • /
    • pp.21-27
    • /
    • 2023
  • Pre-harvest residue limits (PHRLs) have been proposed as criteria for a proactive role to exceed the maximum residue limit (MRL) of pesticides in agricultural products at harvest. However, PHRL numbers are significantly less than those of established MRLs. This study was performed to determine the dissipation constants and residual concentrations of lufenuron after application on crown daisy and chamnamul under green house conditions. Two residue field trials for each crown daisy and chamnamul were selected to consider a different geographical site at least 20 km far from one another. The pesticide was treated according to critical GAP. After samples were sprayed with lufenuron, they were collected at 0, 1, 3, 5, 7, 10, and 14 days and analyzed using HPLC-DAD. The mean recoveries of crown daisy and chamnamul were within the range of 70-120% with below 20% coefficient variation, which is within the acceptable limits specified by the manual of pre-harvest residue study for pesticides (MFDS, 2014). The biological half-lives in field I and field II were 7.0 and 4.6 days for crown daisy and 2.7 and 2.8 days for chamnamul, respectively. The lower bounds of 95% confidence intervals of dissipation rate constants of lufenuron in crown daisy were determined to be 0.0692 and 0.1298 for field I and field II, respectively, and in chamnamul were 0.2067 for both field I and field II. After applying lufenuron 5% EC, the lufenuron residues on crown daisy and chamnamul at the pre-harvest intervals (14 days for crown daisy and 7 days for chamnamul) were below the safe levels. The dissipation rates of lufenuron in crown daisy and chamnamul were evaluated for similarities with leafy vegetables based on a 95% confidence interval.