• Journal of the Korean Society of Clothing and Textiles
• /
• v.48 no.2
• /
• pp.233-253
• /
• 2024

This study analyzed differences between three-dimensional (3D) body scanning and manual measurements, aiming to assess whether 3D scanning can replace traditional anthropometric tools, such as tape measures and calipers. Data from 4,478 participants in the 8th Size Korea Project were analyzed, covering 43 measurement items. Since Given that the 3D and manual measurements were performed on the same subjects in the 8th Size Korea Project, it was possible to determine the correlation more accurately between the two measurement methods more accurately. Using Applying ISO 20685-1(2018) standards, 15 out of the 43 items fell within allowable error limits. When classified into six types, "small circumferences" and "segment lengths" showed averages of 3.35 mm and 3.10 mm, respectively, within acceptable range. "Body heights" and "body depths" slightly exceeded the limit, with averages of 5.28 mm and 6.58 mm. "Body widths" and "large circumferences" surpassed the limit, with means of 16.77 mm and 16.18 mm. The study offers an objective basis to for validate validating 3D measurements' measurements' reliability and accuracy, addressing various industries' needs for information on the human body's dimensions information.

• Geomechanics and Engineering
• /
• v.37 no.4
• /
• pp.371-382
• /
• 2024

Measurement or prediction of compression index (C_c) of soils is essential for assessment of total and differential settlement of structures. It is a well-known fact that this parameter is controlled by several index identifiers of soil including initial void ratio, Atterberg limits, overconsolidation ratio, specific gravity, etc. Many studies in the past proposed relationships for prediction of C_c based on different index properties. Therefore, this study aims to present a comparison of previously proposed equations for estimation of C_c. Data from literature was compiled, and a total of 90 and 623 test results on remolded and undisturbed specimens were used to question the validity of previously proposed equations. Nevertheless, the modeling ability of 7 and 12 equations for estimation of C_c of remolded and undisturbed soils were questioned by use of compiled data. Moreover, new empirical relationships based on initial void ratio and toughness limit for prediction of C_c was proposed by use of nonlinear multivariable regression and evolutionary based regression analyses. The results are promising-the performances of models established are quite acceptable, which are verified by statistical analyses.

• Journal of Food Hygiene and Safety
• /
• v.14 no.2
• /
• pp.201-215
• /
• 1999

Limited information is available on the acceptability of Korean MRLs(maximum residue limits) and the health risk based on the pesticide exposure by food intake. The aim of this study was to evaluate TMDI(theoretical maximum daily intake) and EDI(estimated daily intake) for Korean by using MRLs, food intake, residue data, and correction factors, and compare with ADI(acceptable daily intake) in order to estimate the health risk based on the pesticide exposure. The study was performed in three steps. In the frist step, the residual pesticides in each category of food were investigated using the pesticide residue analytical data(1995-96) from officially approved organizations and the analytical data for poultry was adopted from Korean food code method. In the second step, TMDI was estimated from MRLs and food factors, and was compared with ADI. In the third step, the effectiveness of each culinary treatment (washing, peeling, steaming, boiling, and salting) was evaluated and EDI was calculated using pesticide residue data, food factor, and correction factor by treatment. TMDI obtained from MRLs and food intake, and food intake was summed as 1,100.99 g, which was 79.1% of total consumption. The percent ratio of TMDI to ADI for 156 pesticides was mostly below 80% and only 30 pesticides exceeded the ADI. In particular, non-treated EDI from pesticide residue data and food intake was summed up to about 43 $\mu\textrm{g}$/day/capita, and the rank was procymidone(8.6 $\mu\textrm{g}$) > maleic hydrazide(8.2 $\mu\textrm{g}$) > EPN(3.7 $\mu\textrm{g}$) > deltamethrin(3.5 $\mu\textrm{g}$) > cypermethrin(3.0 $\mu\textrm{g}$). The treated EDI calculated from pesticide residue data, food intake, and correction factor by culinary treatment was summed up to 13.7 $\mu\textrm{g}$/day/captia. The percentage of ADI was TMDI(79.74%) > non-treated EDI (0.17%) > treated EDI (0.04%), and the exposure level of Korean population to whole pesticides was below the level to produce health risk. Oncogenic risk of five pesticides used in Korea whose oncogenic potency(Q*) was known were assessed from TMDI and treated EDI. Dietary oncogenic risk for Korean was estimated to be 2.0$\times$10-3 on the basis of TMDI, 8.3$\times$10-7 on the basis of treated EDI. The oncogenic risk from TMDI exceeded the risk level(1$\times$10-6) of EPA, whereas the oncogenic risk from treated EDI and real exposure level lower than that of EPA.

• Korean Journal of Food Science and Technology
• /
• v.47 no.3
• /
• pp.306-320
• /
• 2015

This survey was carried out in 2014 to estimate the pesticide residue levels in commercial environment-friendly agricultural products in Seoul metropolitan area. Pesticide residues in 27 commodities were examined and analyzed using LC-MS/MS, which can simultaneously detect up to 85 pesticides. A total of 441 samples were collected and analyzed. Among the detected samples, the residue levels in 1.2% of organic agricultural products and 2.2% of pesticide-free agricultural products exceeded the maximum residue limits (MRLs); hence, 1.8% of the total samples exceeded the MRLs. The safety of the detected pesticides was assessed by monitoring the acceptable daily intake level (ADI) and acceptable dietary exposure (ADE) to the pesticides via consumption of the commodities. ADI and ADE are found to be 0.07728-9.46530% and 0.00141-0.17210%, respectively, which means that the residual pesticides in the environmental-friendly agricultural products in Korea are below the safe limit and therefore, pose no potential public health risks.

• The Journal of Korean Academy of Prosthodontics
• /
• v.40 no.2
• /
• pp.131-139
• /
• 2002

There have been many studies about marginal discrepancy of single restorations made by various systems and materials. But many of statistical inferences are not definite because of sample size, measurement number, measuring instruments. etc. The purpose of this study was to compare the marginal adaptations of the anterior single restorations made by different systems and to consider more desirable statistical methods in analysing the marginal fit. The in vitro marginal discrepancies of three different all-ceramic crown systems (Celay In-Ceram. Conventional In-Ceram. IPS Empress 2 layering technique) and one control group (PFM) were evaluated and compared. The crowns were made from one extracted maxillary central incisor prepared with a 1mm shoulder margin and $6^{\circ}$ taper walls by milling machine. 10 crowns per each system were fabricated. Measurements or a crown were recorded at 50 points that were randomly selected for marginal gap evaluation. Non-parametric statistical analysis was performed for the results. Within the limits of this study, the following conclusions were drawn: 1 Mean gap dimensions and standard deviations at the marginal opening for the maxillary incisor crowns were $98.2{\pm}40.6{\mu}m$ for PFM, $83.5{\pm}18.7{\mu}m$ for Celay In-Ceram, $104.9{\pm}44.1{\mu}m$ for conventional In-Ceram, and $45.5{\pm}11.5{\mu}m$ for IPS Empress 2 layering technique. The IPS Empress 2 system showed the smallest marginal gap (P<0.05). The marginal openings of the other three groups were not significantly different (P<0.05). 2 The marginal discrepancies found in this study were all within clinically acceptable standards ($100\sim150{\mu}m$). 3. When the variable is so controlled that the system may be the only one, mean value is interpreted to be the marginal discrepancy of a restoration which is made by each system and standard deviation is to be technique-sensitivity of each one. 4. From the standard deviations. the copy-milling technique (Celay/In-Ceram) was not considered to be technique-sensitive in comparison with other methods. 5. Parametric analysis is more reliable than non-parametric one in interpretation of the mean and standard deviation. The sample size of each group has to be more than 30 to use parametric statistics. The level of clinically acceptable marginal fit has not been established. Further studies are needed.

• Journal of Applied Biological Chemistry
• /
• v.56 no.1
• /
• pp.29-35
• /
• 2013

This study was performed to analyze 48 kinds of pesticide residues using gas chromatography (GC)/nitrogen phosphorous detector, GC/micro electron capture detector, GC/mass selective detector, and high performance liquid chromatograph/diode array detector in 186 fresh ginseng samples collected in the Seoul area from 2010 to 2011. Fresh ginseng dietary intakes were estimated using the data from the 2009 Korea National Health and Nutrition examination survey. Residual pesticides were detected in 79 samples (42.5%) with eight different fungicides. Only 20 samples (10.8%) exceeded the maximum residue limits (MRLs) for pesticides registered by the Korea Food & Drug Administration. Among them, tolclofos-methyl residues (10.2%) exceeded the MRL for fresh ginseng in 18 ginseng seedlings and one of the two-year old fresh ginseng plants, and the residual level in just one ginseng seedling violated the MRL for pyrimethanil. The results showed that residual pesticides levels in marketable fresh ginseng around Seoul were relatively safe. The percent acceptable daily intake (%ADI) was calculated using pesticide residues in fresh ginseng and dietary intakes of fresh ginseng. The risk caused by pesticide residues in fresh ginseng was very low.

• The Korean Journal of Pesticide Science
• /
• v.3 no.2
• /
• pp.37-46
• /
• 1999

In order to ascertain the safety of the systemic insecticide carbofuran-treated crops, samples of garlic, peanut and potato were collected randomly from markets located in the main producing areas and analyzed for the residue of carbofuran and its main metabolite, 3-hydroxycarbofuran. The in vitro metabolism of carbofuran in phosphate buffer extracts of the crops was investigated. Two (M-12 and M-16) out of 20 mature garlic samples contained 0.13 and 0.07 mg/kg of carbohran, respectively, showing a detection incidence of 10%. The residue levels were less than the maximum residue limit (0.5 ppm) set by Korean Food and Drug Administration. Only one sample of mature garlic (M-12) out of 20 contained 0.13 mg/kg of 3-hydroxycarbofuran. The residues of carbofuran and 3-hydroxycarbofuran in the immature garlic, peanut and potato samples were less than the detection limits, 0.02 mg/kg for carbofuran and 0.06 mg/kg for 3-hydroxycarbofuran. The application of carbofuran to the fields of garlic, peanut and potato would be safe, considering that the estimated maximum acceptable daily intake of carbofuran from garlic was 0.0013 mg which is 0.24% of the maximum acceptable daily intake (0.55 mg). Carbofuran was hydrolyzed in vitro mainly to carbofuran phenol (m/z 164) in the respective phosphate buffer extracts of the three crops in contrast to the major oxidative metabolism in situ. The amount of the metabolite increased with the incubation time.

• The Korean Journal of Pesticide Science
• /
• v.19 no.1
• /
• pp.22-31
• /
• 2015

This study was carried out to monitor the current status of pesticide residues in selling agricultural products via online and assessed their safety in 2014. A total of 124 samples were purchased six times from March to August 2014 twenty online shopping malls randomly. These samples were analysed 208 pesticides by multiresidue method using a GC-ECD/NPD and a LC-MS/MS and confirmed by a GC-MSD. As a result of analysis, residual pesticides samples were 11 (8.9%) such as leek, young radish, welsh onion etc, of which 2 samples (1.6%) such as sesame bud (Chlorothalonil), artemisia (Chlorpyrifos) were violated Korea Maximum Residue limits (MRLs). 11 kinds of pesticides (19 times) were detected in 11 samples. Risk assessment evaluated human health exposure with the ratio of EDI (Estimated daily intake) to ADI (Acceptable daily intake) of pesticides detected. %ADI (the ratios of EDI to ADI) were 0.04~95.70% and some samples represented a fairly dangerous levels. In particular, Chlorothalonil in the sesame bud was shown as a significant risk close to 100% of %ADI. Accordingly, it is recommended to strengthen a safety check on agricultural products in online sales.

• Proceedings of the Korean Society of Tobacco Science Conference
• /
• 1997.10a
• /
• pp.79-90
• /
• 1997

The world-wide cigarette market is becoming increasingly regulated. This involves restrictions on the freedom to advertise, restrictions on where people can smoke, and in some ways of most importance, limits on cigarette smoke deliveries. In particular, in an increasingly large number of countries maximum tar legislation is being enacted. In many cases, such as the European Union, this type of legislation is progressive and over time it is entirely conceivable that maximum permitted tar deliveries will be reduced to as low as 5 mg, possibly with additional restrictions on smoke nicotine deliveries. In addition, the pace of change is increasing as more and more countries embark on tar reduction programmes. The key challenge facing the cigarette industry is to manage these changes in such a way which ensures that product acceptability is maintained at as high a level as is possible in these circumstances. There are a number of ways of achieving this involving filter ventilation, modifying blends and using different filter constructions The real innovation comes when combining these in a way that gives the most acceptable balance of all these competing variables as far as the smoker is concerned. Undoubtedly, the nature of the filter is of crucial importance in designing the most acceptable low tar products, and this paper will discuss some of the filter types which are currently in use in the various low tar markets around the world. Also, some thoughts about the future in terms of new filter developments will be presented.

• Journal of Food Hygiene and Safety
• /
• v.32 no.3
• /
• pp.193-198
• /
• 2017

Scutellaria baicalensis, Eleutherococcus senticosus, and Angelica sinensis have been used as raw materials for health functional foods. This study was conducted to develop a novel method to analyze levels of baicalin (Scutellaria baicalensis), eleutheroside E (Eleutherococcus senticosus), and ligustilide (Angelica sinensis) simultaneously in health functional foods. The methanol extracted samples were analyzed and quantified via liquid chromatography-tandem mass spectrometry (LC-MS/MS) in the positive ion mode and the negative ion mode using multiple reaction monitoring. Standard calibration curves confirmed linearity with the correlation coefficient ($r^2$) of > 0.99 at $100-2000{\mu}g/mL$ concentration range. The limits of detection (LODs) and limits of quantitation (LOQs) were in the range of $13.0{\sim}35.2{\mu}g/L$ and $39.3{\sim}106.7{\mu}g/L$, respectively. The recovery results ranged between 91.4~109.9% at 3 different concentration levels with relative standard deviations (RSDs) less than 5%. The proposed analytical method was characterized with high accuracy and acceptable precision. The new method would be an effective tool to analyze baicalin, eleutheroside E, and ligustilide simultaneously in raw materials of health functional foods.