• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.6
• /
• pp.125-133
• /
• 2016

As one of solutions to pursue the efficient use of spectrum resource, we proposed the methodology for the co-channel multi-site radar operations with the synchronous GPS clock. The proposed algorithm, based on a quasi orthogonal property, find a candidate set of the time shifted linear frequency modulation(TSLFM) signals with the minimum acceptable level of the correlation among selected TSLFM signals. To check suggested algorithm, numerical analysis for several radars operating in the same channel with a sawtooth waveform has been performed by using range-Doppler processing for the given system parameters, and computational results are presented and examined in terms of range profile and doppler shift for a targets with velocity and distance. Simulated results have a good agreement with assumed target distance and its velocity, within the error of resolution.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.3 no.2
• /
• pp.58-64
• /
• 2008

In this paper, we proposed the methodology of interference analysis based on monte-carlo method for effective use of Industrial, Scientific, Medical (ISM) band. The interference scenario is divided according to the distance and density. The simulation of interference analysis evaluates the interference probability according to distribution density of Interfering Transmitters (It) in the Secure Interference Area (SIA). The SIA is gained from the Interference Efficiency Range that satisfied to Interference Permissible Range of Victim Receiver (Vr). Simulation result that apply the proposed interference scenario to the WLAN and bluetooth, Interference Permissible Range was 60~400m. And the WLAN was acceptable within interference permissible range to six bluetooth that exist in the SIA. In the same condition, when applied Listen Before Talk (LBT) based on Cognitive Radio (CR) to the bluetooth using Frequency Hopping (FH), interference probability was decreased sharply. The Spectrum Engineering Advanced Monte Carlo Analysis Tool (SEAMCAT) that has been developed based on the monte-carlo method by European Radio-communications Office (ERO) were used to the interference simulation.

• Korean Journal of Head & Neck Oncology
• /
• v.21 no.2
• /
• pp.126-131
• /
• 2005

Objectives: To evaluate the efficacy and safety of induction chemotherapy with docetaxel and cisplatin in locally advanced head and neck cancer. Materials and Methods: Between June 1998 and December 2004, 30 patients were enrolled and among them, 20 patients were evaluable. Patients were treated with docetaxel $75mg/m^2$ and cisplatin $60mg/m^2$ on day 1 every 21 days. Results: The median age was 71(range 54-80) years old. All 20 patients were male. Nineteen patients had pathologically squamous cell carcinoma and 1 had undifferentiated carcinoma. Fourteen of 20 patients(70%) demonstrated an objective response with two(10%) achieving a complete clinical response and eleven(60%) a partial response. The median response duration was 5.3(1.6-32.1) months and the median time to progression was 5.6(1.4-33.8) months. The median overall survival of all patients was 14(range 2.2-34) months. The median overall survival of responders was 17.5(range 5-34) months and that of non-responders was 3.2(range 2.2-23) months, but it was not statistically significant(p=0.106). During a total of 92 cycles, granulocytopenia worse than CTC(Common toxicity criteria) grade 2 occurred in 6%, thrombocytopenia in 2%, and anemia in 3%, respectively. Non-hematologic toxicities were minor and easily controlled. Conclusion: The induction chemotherapy of docetaxel and cisplatin has moderate efficacy with acceptable toxicities in patients with locally advanced head and neck cancer.

• Journal of Chest Surgery
• /
• v.33 no.8
• /
• pp.630-637
• /
• 2000

Backgroud: There are well-known problems in the management of low weight neonates or infants with congenital heart defects. In the past, because of a perceived high risk of operations using cardiopulmonary bypass(CPB) in these patients, there was a tendency for staged palliation without the use of CPB. However, the recent trend has been toward early reparative surgery using CPB, with acceptable mortality and good long-term survival. Therefore we reviewed our results of the operations in infants weighing less than 3kg and considered the technical aspect of conducting the CPB including myocardial protection. Material and Method: Between Jan. 1995 and Jul. 1998, 28 infants weighing less than 3kg underwent open heart surgery for many cardiac anomalies with a mean body weight of 2.7kg(range; 1.9-3.0kg) and a mean age of 41days(range; 4-110days). Preoperative management in the intensive care unit was needed in 20 infants and preoperative ventilator support therapy in 11. Total correction was performed in 23 infants and the palliative procedure in 5. Total circulatory arrest was needed in 11 infants(39%). Result: There were seven hospital deaths(25%) caused by myocardial failure(n=3), surgical failure(n=2), multiorgan failure(n=1), and sudden death(n=1). The median duration of hospital stay and intensive care unit stay were 13days(range; 6-93days) and 6days(range; 2-77days) respectively. The follow-up was achieved in 21 patients and showed three cases of late mortality(15%) and a one-year survival rate of 62%. No neurologic complications such as clinical seizure and intracranial bleeding were noticed immediately after surgery and during follow-up. Conclusion: The early and late mortality rate of open heart surgery in our infants weighing less than 3 kg stood relatively high, but the improved outcomes are expected by means of the delicate conduct of cardiopulmonary bypass including myocardial protection as well as the adequate perioperative management. Also, the longer follow-up for the neurologic development and complications are needed in infants undergoing circulatory arrest and continuous low flow CPB.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.39
• /
• pp.4.1-4.7
• /
• 2017

Background: This study is a quantitative evaluation of the influence of the mentolabial angle on perceived attractiveness and threshold values of desire for surgery. Methods: The mentolabial angle of an idealized silhouette male Caucasian profile image was altered incrementally between $84^{\circ}$ and $162^{\circ}$. Images were rated on a Likert scale by pretreatment orthognathic patients (n = 75), lay people (n = 75) and clinicians (n = 35). Results: A mentolabial angle of approximately $107^{\circ}$ to $118^{\circ}$ was deemed the most attractive, with a range of up to $140^{\circ}$ deemed acceptable. Angles above or below this range were perceived as unattractive, and anything outside the range of below $98^{\circ}$ or above $162^{\circ}$ was deemed very unattractive. A deep mentolabial angle ($84^{\circ}$) or an almost flat angle ($162^{\circ}$) was deemed the least attractive. In terms of threshold values of desire for surgery, for all groups, a threshold value of ${\geq}162^{\circ}$ and ${\leq}84^{\circ}$ indicated a preference for surgery, although clinicians were least likely to suggest surgery. The clinician group was the most consistent, and for many of the images, there was some variation in agreement between clinicians and lay people as to whether surgery is required. There was even more variability in the assessments for the patient group. Conclusions: It is recommended that in orthognathic and genioplasty planning, the range of normal variability of the mentolabial angle, in terms of observer acceptance, is taken into account as well as threshold values of desire for surgery. The importance of using patients as observers in attractiveness research is stressed.

• Journal of Families and Better Life
• /
• v.30 no.5
• /
• pp.89-105
• /
• 2012

The purpose of this study is to analyze working mothers' demand for child care and housekeeping home services, and to investigate the present supply condition of home services in Korea. Data collection was implemented to examine the service demand of working mothers(n=700) in four areas. The data were analyzed with SPSS. The results were as follows: 1) For home-based child-care dispatch services social enterprises are superior to other private service suppliers in terms of the treatment of service workers, wages, and quality control. As for child care service contents, the provision of meals, and casual safeguards were mostly expected. The most important qualification for care providers was found to be in faithfulness, and the certification related with child care was required. An affordable wage range was perceived as ￦3,000~5,000 per hour, and part time services. For the time range, services which commenced before 9 am and terminated after between 5~6 pm were preferred. 2) For housekeeping dispatch services, standard services, including basic cleaning, preparation of meals and side dishes, special cleaning, and washing, were in demand. The required qualifications of housekeeping service providers were similar to those of child care service providers. Possessing certification was not considered as an important quality; however, personality and career type were important factors. An acceptable wage range was ￦3,000~5,000 per hour and part-time services were preferred. In terms of the service time range, services which commenced between 8~9 am and terminated between 5~7 pm were preferred.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.4
• /
• pp.669-676
• /
• 2023

In this paper, a multi-purpose golf putting range finder based on an IR razer sensor and an inertial sensor was designed and made. It was designed to measure distance and slope within a 50m outdoor measurement range for the main purpose of golf putting distance measurement, and at the same time, it is designed to measure temperature information that affects putting. In addition, the distance meter supports house maintenance work by providing length and horizontality measurement values within the indoor 80m measurement range, and provides safety from indoor or vehicle fires by providing indoor temperature measurement values to mobile phones through linkage with the web server. In order to evaluate the accuracy of the proposed method and its interworking performance with a smartphone, a prototype was produced and a web server was built, and the usefulness was confirmed by showing an acceptable error rate within 5% in repeated experiments.

• Transactions of the Korean hydrogen and new energy society
• /
• v.19 no.2
• /
• pp.118-123
• /
• 2008

For the hydrogen recirculation system of the PEMFC (polymer electrolyte membrane fuel cell), the ejector is useful to improve the efficiency of the fuel cell system. However, conventional ejector does not keep its entrainment ratio good when the various power duties is required by the fuel cell system. In this study, the variable multi-ejector acceptable in the whole duty range required from the fuel cell hybrid mini-bus is developed. Consequently, the performance of the developed ejector is verified by the experiments based on the real operating conditions.

• Journal of the Korean Society of Combustion
• /
• v.19 no.4
• /
• pp.21-27
• /
• 2014

MGT (micro gas turbines) have been gaining particular attentions with a variety of commercial and military applications due to their advantages such as compact size, simple operability, easy maintenance, and low emissions. This study deals with development processes of an annular combustor applied to MGT. Preliminary design methodologies are used to size the main components of the combustor. Key design features such as liner temperatures and pressure losses are evaluated. Results show that the estimated liner temperatures are within acceptable range. Dominant factors for pressure losses are estimated to be air admission holes and burner swirlers.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.4 no.3
• /
• pp.174-181
• /
• 2004

In this paper, we review the four receiver architectures and four methods for multi-standard receiver design. Propose reconfigurable RF block can be used for both low-IF and direct conversion architecture. Also, using reconfigurable mixer method, it can be operated at $2{\sim}6$ GHz range for multi-standard receiver. It consists of wideband mixer, filter, and automatic gain control amplifier and to get wide-band operation, $2{\sim}6$ GHz, wide-band mixer use flexible input matching method. Besides, to design multi-standard receiver, LNA bank that support each standard is necessary and it has good performance to compensate the performance of wide-band mixer. Finally, we design and simulate proposed reconfigurable RF block and to prove that it has acceptable performances for various wireless standards, the LNA bank that supports both IEEE 802.11a/b/g and WCDMA is also designed and simulated with it.