• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2014년도 하계학술대회
• /
• pp.166-168
• /
• 2014

Coarse-grained reconfigurable architectures (CGRAs) present a potential of high compute throughput with energy efficiency. A CGRA consists of an array of functional units (FU), which communicate with each other through an interconnect network containing transmission nodes and register files. To achieve high performance from the software solutions mapped onto CGRAs, modulo scheduling of loops is generally employed. One of the key challenges in modulo scheduling for CGRAs is to explicitly handle routings of operands from a source to a destination operations through various routing resources. Existing modulo schedulers for CGRAs are slow because finding a valid routing is generally a searching problem over a large space, even with the guidance of well-defined cost metrics. Applications in traditional embedded multimedia domains are regarded relatively tolerant to a slow compile time in exchange of a high quality solution. However, many rapidly growing domains of applications, such as 3D graphics, require a fast compilation. Entrances of CGRAs to these domains have been blocked mainly due to its long compile time. We attack this problem by utilizing patternized routes, for which resources and time slots for a success can be estimated in advance when a source operation is placed. By conservatively reserving predefined resources at predefined time slots, future routings originated from the source operation are guaranteed. Experiments on a real-world 3D graphics benchmark suite show that our scheduler improves the compile time up to 6000 times while achieving average 70% throughputs of the state-of-art CGRA modulo scheduler, edge-centric modulo scheduler (EMS).

• 비파괴검사학회지
• /
• 제35권1호
• /
• pp.18-24
• /
• 2015

철도 시설물의 상태를 종합적으로 동시에 검측하고 건전성 평가가 가능한 고속 종합검측시스템을 위해 열차의 위치검지 정보는 필수불가결하다. 본 논문에서는 위치검지를 위한 위치 기술중 관성센서의 측정과 분석에 대해 다룬다. 관성센서의 가속도 정보와 각속도 정보에 대해 진폭과 주파수 관점에서 분석하였고, 진동 및 열차 동역학에 대한 검토도 이루어졌다. 이러한 검토 결과와 GPS 정보를 이용하여 호남선 나주역부터 일로역까지 한국형 틸팅열차의 위치검지를 수행하였다. 이와 같은 센서 측정치와 열차의 거동에 대한 동기화된 분석은 열차위치검지 시스템의 설계와 성능 향상에 도움을 줄 수 있다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.297-302
• /
• 2007

Vibrating test of vehicle component can be possible in lab-based simulators instead of field testing owing to the development of technology in control algorithm as well as computational process. Currently, Multi-Axial Simulation Table(MAST) is recommended as a vibrating equipment, which excites a target component for 3-directional translation and rotation motion simultaneously and hence, vibrational condition can be fully approximated to that of real road test. But, the vibration-free performance of target component is not guaranteed with MAST system, which is only simulator subjective to the operator. Rather, the reliability of multi-axial vibration test is dependent on the quality of input profile which should cover the required severity of vibrating condition on target component. In this paper, multi-axial vibration testing methodology of vehicle component is presented here, from data acquisition of vehicle accelerations to the obtaining the input profile of MAST using severe data at proving ground. To compare the severity of vibration condition, between real road test and proving ground one, energy principle of equivalent damage is proposed to calculate energy matrices of acceleration data and then, it is determined the optimal combination of special events on proving ground which is equivalent to real road test at the aspects of vibration fatigue using sequential searching optimal algorithm. To explain the vibration methodology clearly, seat and door component of vehicle are selected as a example.

• 한국강구조학회 논문집
• /
• 제24권1호
• /
• pp.91-99
• /
• 2012

최근 인접 건축물의 진동제어와 관련된 연구가 몇몇 연구자에 의하여 수행되고 있으며 그리고 구조물의 지진동 제어를 위하여 준능동 감쇠기의 일종인 MR 감쇠기가 적용되고 있다. 본 논문에서는 MR 감쇠기의 위치에 따른 인접 건축물의 지진동 제어성능을 분석하여 MR 감쇠기의 설치에 대한 최적의 위치를 선정하고자 한다. 본 연구를 위하여 인접한 20층과 15층 건축물을 예제 구조물로 사용하였으며 이 예제 구조물은 서로 다른 고유진동수를 갖게 하였으며 예제 구조물의 지진동 제어를 위하여 Groundhook 제어기법을 적용하였다. 예제 구조물의 수치해석에 의한 지진응답 분석결과, 변위응답 제어를 위하여 인접 건축물의 최상층에 MR 감쇠기를 설치하는 것이 제어성능에 있어서 우수하며 가속도응답을 제어하기 위해서는 인접 건축물의 중간층에 MR 감쇠기를 설치하는 것이 우수한 제어성능을 보이고 있다. MR 감쇠기를 중간층에 설치할 경우에, 변위응답과 가속도응답을 동시에 제어가 가능하다. 따라서 건축물의 제어 목표에 따라서 MR 감쇠기 설치위치를 적절하게 선정해야 할 것이다.

• 전기학회논문지
• /
• 제66권10호
• /
• pp.1499-1507
• /
• 2017

This paper presents an impact-based piezoelectric vibration energy harvester using a freely movable metal sphere and a piezoceramic fiber-based MFC (Macro Fiber Composite) as piezoelectric cantilever. The free motion of the metal sphere, which impacts both ends of the cavity in an aluminum housing, generates power across a cantilever-type MFC beam in response to low frequency vibration such as human-body-induced motion. Impacting force of the spherical proof mass is transformed into the vibration of the piezoelectric cantilever indirectly via the aluminum housing. A proof-of-concept energy harvesting device has been fabricated and tested. Effect of the indirect impact-based system has been tested and compared with the direct impact-based counterpart. Maximum peak-to-peak open circuit voltage of 39.8V and average power of $598.9{\mu}W$ have been obtained at 3g acceleration at 18Hz. Long-term reliability of the fabricated device has been verified by cyclic testing. For the improvement of output performance and reliability, various devices have been tested and compared. Using device fabricated with anodized aluminum housing, maximum peak-to-peak open-circuit voltage of 34.4V and average power of $372.8{\mu}W$ have been obtained at 3g excitation at 20Hz. In terms of reliability, housing with 0.5mm-thick steel plate and anodized aluminum gave improved results with reduced power reduction during initial phase of the cyclic testing.

• 한국항행학회논문지
• /
• 제18권2호
• /
• pp.107-113
• /
• 2014

본 논문에서는 무인항공기용 소형 터보제트엔진에 대해 압축기 서지현상 및 화염소실을 방지하면서 과도응답 특성을 개선하는 제어기를 설계하였다. 인공신경망과 PID 제어 알고리즘을 적용하는 터보제트엔진 제어기를 설계하고 인공신경망 역전파 알고리즘을 사용하였다. 터보제트 엔진의 가 감속 시 서지현상과 flame-out 현상을 방지하기 위해 연료 유량 제어 입력을 인공신경망 PID 제어기로 생성한다. 생성된 연료 유량 제어 입력은 신속하고 안전하게 원하는 속도로 수렴할 수 있도록 제어기를 설계한다. MATLAB을 이용한 시뮬레이션을 통해 이득 값에 따른 응답특성 비교 분석 및 신속하고 안전하게 원하는 속도로 수렴하는 제어성능을 확인하였다.

• 한국도로학회논문집
• /
• 제16권5호
• /
• pp.109-119
• /
• 2014

PURPOSES : The control delay in seconds per vehicle is the most important traffic operational index to evaluate the level of service of signalized intersections. Thus, it is very critical to calculate accurate control delay because it is used as a basic quantitative evidence for decision makings regarding to investments on traffic facilities. The control delay consists of time-in-queue delay, acceleration delay, and deceleration delay so that it is technically difficult to directly measure it from fields. Thus, diverse analysis tools, including CORSIM, SYNCHRO, T7F, VISTRO, etc. have been utilized so far. However, each analysis tool may use a unique methodology in calculating control delays. Therefore, the estimated values of control delays may be different by the selection of an analysis tool, which has provided difficulties to traffic engineers in making solid judgments. METHODS : This study was initiated to verify the feasibility of diverse analysis tools, including HCM methodology, CORSIM, SYNCHRO, T7F, VISTRO, in calculating control delays by comparing estimated control delays with that measured from a field. RESULTS : As a result, the selected tools produced quite different values of control delay. In addition, the control delay value estimated using a calibrated CORSIM model was closest to that measured from the field. CONCLUSIONS : First, through the in-depth experiment, it was explicitly verified that the estimated values of control delay may depend on the selection of an analysis tool. Second, among the diverse tools, the value of control delay estimated using the calibrated microscopic traffic simulation model was most close to that measured from the field. Conclusively, analysts should take into account the variability of control delay values according to the selection of a tool in the case of signalized intersection analysis.

• 대한기계학회논문집B
• /
• 제39권2호
• /
• pp.199-206
• /
• 2015

본 연구에서는 인공신경망을 이용하여 배관이나 배관요소의 작동상태를 예측할 수 있는 진단방법을 제안한다. 입자영상유속계 기술을 이용하여 얻어진 배관의 검사부위의 진동에 의한 이동량을 인공신경망의 학습용으로 사용한다. 측정시스템은 카메라, 조명, 인공신경망이 탑재된 호스트컴퓨터로 구성된다. 구축된 모니터링시스템이 제대로 작동하는지 이미 알고 있는 진동원(2개의 휴대폰)에 대하여 적용하였다. 진동가속도의 최소값, 최대값, 평균값을 인공신경망의 학습에 사용해 본 결과, 평균값이 진동상태의 실시간 모니터링에 적합함을 확인하였다. 구축된 진단시스템은 실제 가스배관의 작동상태에 대하여 모니터링 가능함이 확인되었다.

• 한국항공우주학회지
• /
• 제36권9호
• /
• pp.929-937
• /
• 2008

한국항공우주연구원에서 개발하고 있는 KSLV(Korea Space Launch Vehicle)-I 발사체의 비행 안전용 센서의 하나로 활용하기 위하여 개발된 GPS 수신기 시스템은 위성발사체의 특수한 비행환경과 높은 동특성 환경에서도 정상적으로 동작해야 한다. 5년에 걸쳐 개발이 완료된 위성발사체용 GPS 수신기 시스템은 습도, 고온, 저온, 진공, 정현파 및 랜덤진동, 충격, 가속도, 전자파 환경시험 등을 통하여 특수한 환경에서의 성능을 검증하였으며, GPS 시뮬레이터를 이용한 다양한 성능시험을 수행하여 높은 동특성 환경에서도 안정적으로 동작할 수 있음을 확인하였다. 본 논문에서는 위성발사체용 GPS 수신기 시스템의 전 개발과정을 소개하고, 일반적인 GPS 수신기 시스템과 비교하여 개발된 GPS 수신기 시스템의 특수한 기능들을 설명한다.

• 한국안전학회지
• /
• 제32권3호
• /
• pp.117-122
• /
• 2017

In this study, we studied the ride quality considering the deterioration effects of the three type couplers (single, double, and ring types) for EMUs. In order to know the impact occurred when an urban transit vehicle is under breaking, we tested the conditions of the service brake and the emergency brake. Normal coupler models without any slack showed similar dynamic performance results under all breaking conditions. But if the couplers become old, the initial pre-stresses are removed because of permanent compressive deformation in rubber. For three types of the old coupler models without the initial pre-stress, we evaluated dynamic performances of each type. As the results, the maximum and average acceleration levels of the double type and the ring type were similarly low in all conditions. But the accelerations of the single type coupler was high when compared to those of the double and ring types. In addition, Jerk value of the single type model associated with ride quality was high up to 15 times to the ring type in condition of the service braking in empty vehicle weight. Jerk value of the double type model was high up to 6 times to the ring type.