• 한국컴퓨터정보학회논문지
• /
• 제24권4호
• /
• pp.57-63
• /
• 2019

In this paper, we propose a new framework to control VR(Virtual reality) contents in real time using user's mouth-wind and acceleration sensor of mobile device. In VR, user interaction technology is important, but various user interface methods is still lacking. Most of the interaction technologies are hand touch screen touch or motion recognition. We propose a new interface technology that can interact with VR contents in real time using user's mouth-wind method with acceleration sensor. The direction of the mouth-wind is determined using the angle and position between the user and the mobile device, and the control position is adjusted using the acceleration sensor of the mobile device. Noise included in the size of the mouth wind is refined using a simple average filter. In order to demonstrate the superiority of the proposed technology, we show the result of interacting with contents in game and simulation in real time by applying control position and mouth-wind external force to the game.

• International Journal of Ocean System Engineering
• /
• 제1권3호
• /
• pp.165-170
• /
• 2011

In this paper, for the accurate estimation of the position and orientation of the UUV (unmanned underwater vehicle), an AHRS (Attitude Heading Reference System) was developed using the IMU (inertial measurement unit) sensor which provides information on acceleration and orientation in the object coordinate and the initial alignment algorithm and the E-KF (extended Kalman Filter). The initial position and orientation of the UUV are estimated using the initial alignment algorithm with 3-axis acceleration and geomagnetic information of the IMU sensor. The position and orientation of the UUV are estimated using the AHRS composed of 3-axis acceleration, velocity, and geomagnetic information and the E-KF. For the performance test of the orientation estimation of the AHRS, a testbed using IMU sensor(ADIS16405) and DSP28335 coded with an E-KF algorithm was developed and its performance was verified through tests.

• 한국IT서비스학회지
• /
• 제10권1호
• /
• pp.65-72
• /
• 2011

In this paper, we consist of three dimensional acceleration sensor as a small-sized sensor module to acquire base technologies that need to estimate exhibition audience' moving distance. and that we developed algorism and device that can calculate acceleration in gravity direction with attaching it to people's body part without regard to three dimensional direction. By making use of the sensor module, we have to process the data that let it quantitatively process possible to measure people's walk and movement by computer system. We normalized sensor output data in the process of change from sensor module to acquisition of data, rectangular coordinates and single scalar acceleration value in gravity direction. Printed out sensor data attaching sensor module to people's body part is used for motion pattern detection after normalization, Motion sensor devised mode change algorism because it print data of other pattern according to attached position of body. For algorism design, we collected data occurring during walking about subject and we also defined occurring problem domain after analyzing the data. We settle defined problem domain and that we simulated the walking number measuring instrument with highly efficient in restricted environment.

• 전기학회논문지
• /
• 제59권1호
• /
• pp.220-224
• /
• 2010

In this study, we designed a device for consecutively observing position, utilizing 3-axises acceleration sensor. This method offer to check his or her wrong position and developed could to help derived a position appliance. And, we developed a Cobb's angle value in three dimensional using 3-axises acceleration sensor. A proposed device with integrated accelerometers, which can detect postural changes in terms of curvature variation of the spine in the sagittal and coronal planes, has been developed with intention to facilitate posture training. The proposed device was evaluated with 3 normal subjects daily activities. We evaluated the performance of our designed device as calculating the correlation coefficients and mean errors between the angle measured by an electro-goniometer and that estimated by a gravity accelerometer and verified the accuracy and sensitivity. The results showed that the angle obtained from the proposed device revealed a linear characteristic at the range of $\pm60^{\circ}$(correlation coefficient 0.99, error range $\pm2^{\circ}$). We demonstrated that our device could detect the changes of the motion in upper trunk accurately. Also, our device showed good potential for treatment of the patients with scoliosis and prevention of the unbalance position during a daily life.

• 로봇학회논문지
• /
• 제12권3호
• /
• pp.258-262
• /
• 2017

In this paper, we propose a new collision detection algorithm for human-robot collaboration. We use an IMU sensor located at the tip of the manipulator and the kinematic behavior of the manipulator to detect the unexpected collision between the robotic manipulator and environment. Unlike other method, the developed algorithm uses only the kinematic relationship between the manipulator joint and the end effector. Therefore, the collision estimation signal is not affected by the error of the dynamics model. The proposed collision detection algorithm detects the collision by comparing the estimated acceleration of the end effector derived from the position, velocity and acceleration trajectories of the robot joints with the actual acceleration measured by the sensor. In simulation, we compare the performance of our method with the conventional Residual Observer (ROB). Our method is less sensitive to the load variation because of the independency on the dynamic modeling of the manipulator.

• 센서학회지
• /
• 제25권3호
• /
• pp.202-207
• /
• 2016

Estimation of vertical position is critical in applications of sports science and fall detection and also controls of unmanned aerial vehicles and motor boats. Due to low accuracy of GPS(global positioning system) in the vertical direction, the integration of IMU(inertial measurement unit) with the GPS is not suitable for the vertical position estimation. This paper investigates an IMU-barometer integration for estimation of vertical position (as well as vertical velocity). In particular, a new two-step Kalman/complementary filter is proposed for accurate and efficient estimation using 6-axis IMU and barometer signals. The two-step filter is composed of (i) a Kalman filter that estimates vertical acceleration via tilt orientation of the sensor using the IMU signals and (ii) a complementary filter that estimates vertical position using the barometer signal and the vertical acceleration from the first step. The estimation performance was evaluated against a reference optical motion capture system. In the experimental results, the averaged estimation error of the proposed method was 19.7 cm while that of the raw barometer signal was 43.4 cm.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.187-192
• /
• 1992

There are several potential error sources that can affect the estimation of the position of an object using combined vision and acceleration measurements. Two of the major sources, accelerometer dynamics and random noise in both sensor outputs, are considered. Using a second-order model, the errors introduced by the accelerometer dynamics are reduced by the smaller value of damping ratio and larger value of natural frequency. A Kalman filter approach was developed to minimize the influence of random errors on the position estimate. Experimental results for the end-point movement of a flexible beam confirmed the efficacy of the Kalman filter algorithm.

• 한국산학기술학회논문지
• /
• 제11권4호
• /
• pp.1294-1300
• /
• 2010

노드들 모두가 움직이는 환경에서 센서 노드는 통신반경 안의 앵커 노드 위치정보를 수신 받아 자신이 이동한 거리와 방향만큼 수신한 앵커 노드 위치정보를 수정하여 자신의 메모리에 저장하고, 3개 이상이 되면 삼변 측량에 의해 localization을 수행하여 자신의 위치를 결정한다. 일정한 거리를 유지하고 노드들이 같은 방향으로 움직이는 환경에서는 센서 노드가 1홉 범위에서 절대좌표를 가진 앵커 노드를 3개 이상 만날 확률이 적다. 만약 센서 노드가 3개 이상의 비콘 정보로 자신의 위치를 추정하였다고 하여도 시간이 경과하면서 가속도기와 디지털 나침반의 각 ${\theta}$ 오차가 지속적으로 적용되어 오차범위는 커지고 추정된 위치도 신뢰받지 못한다. Dead reckoning 기술은 GPS가 동작하지 않는 곳에서 보조적인 위치 추적 항법 기술로 사용되고 있는데 가속도 센서와 디지털 나침반으로 노드가 움직인 거리와 방향을 알면 자신의 위치를 추정할 수 있다. 위치 인식 알고리즘은 Dead reckoning 을 이용한 위치인식 기법으로 모든 노드가 전방향성 안테나를 장착하고, 가속도기와 디지털 나침반으로 자신이 이동한 거리와 이동 방향을 알 수 있다고 가정한다. Matlab을 이용하여 시뮬레이션한 결과 다른 기법(MCL,DV-distance)들 보다 우수함을 증명하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.347-348
• /
• 2013

• 한국전자통신학회논문지
• /
• 제10권4호
• /
• pp.469-475
• /
• 2015

본 논문은 반도체 센서를 이용하여 공간상 시스템의 자세를 정확히 측정할 수 있도록 확장 칼만 필터를 설계하는 방법에 관한 연구이다. 공간상 자세는 관성좌표계(고정 좌표계)로부터 몸체에 부착된 회전좌표계의 상호 관계로 표현한다. 자세를 표현하는데 있어서 간결한 방법인 쿼터니언을 상태변수로 이용하며, 속도 센서로부터 계측된 값을 입력으로 가정하고, 상태 변화를 추정하였다. 그리고 가속도 센서로부터 획득된 값을 관측 데이터로 하여 추정한 값과의 정합과정을 통해 최적의 추정치를 얻어낸다. 이때 추정의 정밀도를 높이기 위해 추정 주기를 센서특성에 맞춰 조절하도록 확장 칼만 필터를 설계하였다. 그 결과, 3축 속도 센서와 3축 가속도 센서를 이용하여 설계된 추정기의 RMS(: Root Mean Square) 추정오차가 시뮬레이션에서 약 1.7 [$^{\circ}$] 이하로 유지되었고, 실험에서 100 [ms] 의 주기로 상태추정을 함으로 추정기가 유용함을 입증하였다.