• 한국구조물진단유지관리공학회 논문집
• /
• 제14권5호
• /
• pp.63-71
• /
• 2010

본 논문은 프리캐스트 콘크리트 구조물의 조기강도를 촉진시키기 위한 양생공법 중에서 증기양생에 대한 연구내용으로서, 콘크리트 원주형 공시체와 목업체의 실험을 통하여 초기재령에서 요구되는 강도가 발현될 수 있는 증기양생주기와 최고온도를 정량화하여 최적 증기양생온도주기를 고찰하였다. 또한 고온의 증기양생으로 인하여 발생된 콘크리트의 높은 온도와 거푸집 제거시에 발생되는 균열의 발생원인과 대책에 대하여 기술하였으며, 궁극적으로는 PC 부재를 생산하는 과정에서의 조기강도발현과 품질확보를 동시에 만족하면서 경제성 있는 제작방법을 제시하였다.

• 한국연초학회지
• /
• 제20권1호
• /
• pp.19-25
• /
• 1998

The bulk curing experiment to the improve the quality of flue-cured leaves were carried out to evaluate relationship between cyclic curing and conventional curing method. We studied the effect of the cyclic change of wet bulb temperature at the yellowing stage of flue curing on chemical properties of cured leaves. The wet bulb temperature was automatically controlled between preset high($38^{\circ}C$) and low point ($35^{\circ}C$) everyone hour cyclically during 12 hours after starting luring. As a result, the acceleration of the increase in the chemical properties of cured leaves were observed. As to the chemical properties, there was decreased in citric acid, increased in malic acid of the nonvolatile organic acids and all higher fatty acids content of leaves cured by this method compared with in that of conventional curing method, while a major chemical compounds in relation to aromatic essence of cigarette smoke in essential oil components of lured leaves was mostly higher in this method than those of conventional ones, and it was evaluated that there was decreased in CO, TPM, Tar, and $CO_2$ content of the cigarette smoke comparing to the conventional luring method.

• 한국연초학회지
• /
• 제20권1호
• /
• pp.13-18
• /
• 1998

In the flue curing process, the wet bulb temperature is usually controlled at a constant level. To improve the quality of flue cured leaves, we studied the effect of the cyclic change of wet bulb temperature at the yellowing stage of flue curing on physical properties of cured leaves. The wet bulb temperature was automatically controlled between preset high (38℃) and low point (35℃) every one hour cyclically. As a result, the acceleration of the increase in the physical properties of cured leaves were observed. The leaves cured by this method were more or less orange in color, better bodied, and less brittle compared with the leaves produced by conventional curing. However, the leaves cured by this method had a little sharpness and harshness. As to the physical properties, there was decreased in occurrence of flat leaves than that of conventional ones. On the other hand, in case of cyclic curing method, increase of price per kg reached to 2-3% compared with those of conventional ones.

• Restorative Dentistry and Endodontics
• /
• 제26권2호
• /
• pp.127-133
• /
• 2001

There are several factors affecting the effectiveness of polymerization of the esthetic restorative materials. Among those factors, the initiator. camphoroquinone has the unique characteristic. of which the light sensitivity is very dependent on the wavelength of blue light. Camphoroquinone shows the most light absorption ability in the wavelength range of 470nm. So most of clinically used light curing systems adopt this phenomenon as their polymerization mechanism. The most popular way of light curing system is standard 40 second curing. But the problem of standard curing technique shows the rapid increase of resin viscosity followed by the acceleration of polymerization and the limited resin flow, resulted in reduction of the physicalproperty of restoration by retained stress. The object of this study was to verify the effects of narrow-banded wavelength on the microhardness of the esthetic restorative materials. a composite resin and a compomer, using filters which have peak wave length of 430nm, 450nm, 470nm, respectively. The results were as follows: 1. All the experimental groups showed lower hardness value than the control group. 2. In DyractAP, the hardness value by wavelength showed the same changing pattern on both upper and lower surfaces. 3. In DenFil, the hardness value by wavelength showed different changing pattern on upper and lower surfaces. 4. The hardness ratio showed similar pattern to the hardness variation of lower surface. but there was no significant difference between measurement in 10 minutes and 3 days later, besides the increase of hardness value.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 추계 학술논문 발표대회
• /
• pp.217-219
• /
• 2012

In this study, the experiment was conducted in the level of mortar as one of the basic studies on pre-cast concrete which acceleration curing is not done. This study has the purpose to develop the strength of mortar into 20MPa within 6 hours in the condition of room temperature using admixtures which can accelerate C3S hydration reaction. In this experiment, W/C was fixed into 20%, PCE which can stimulate C3S was used as an accelerating admixture. From the results of this experiment, maximum content of accelerating admixture was 1%. Also, as more than 20MPa was measured through 6-hour compressive strength, it can be known that strength can be developed without steam-curing.

• 한국세라믹학회지
• /
• 제35권2호
• /
• pp.185-195
• /
• 1998

This experiment carried out in order to investigate the effect of the chemical activators for acceleration of hydration the system of Fly ash-Cao The paste was consisted of 80wt% Fly ash and 20wt% CaO with 1. 3. 5wt% of 4 activators(N{{{{ alpha _2 }}S{{{{ OMICRON _4 }}, CaC{{{{ {l }_{2 } }}, NaOH, Ca(N{{{{ OMICRON _3 {)}_{2 } }} and W/S ratio of 0.42 After curing for 1, 3, 7, 14, 28 days the paste hydration was characterized by the measurement of compressive strength XRD analysis SEM observation the combined water and the reaction amount of Ca(OH)2 determination. As a result of this ex-periment all of the system which involved Na2SO4 or NaOH had a god compressive strength. In the case of 7 days curing a system which added CaCl2 showed the highest compressive strength among all especially NaOH system showed a high increase in strength as a dosage of it increased. Hydration products were different according to activatores added. Only C-S-H was observed in NaOH system. As the reaction amount of Ca(OH)2 and combined water were increased the compressive strength increased. There were few differences in the comparision of strength between ignited loss 3.1% and loss 9.3% of fly ash.

• 한국작물학회지
• /
• 제12권
• /
• pp.71-75
• /
• 1972

본 실험은 성숙촉진제 C.E.P.A(2-chloroethyl phosphonic acid)를 처리하여 잎담배 성숙촉진 여부와 나아가서 수량 및 품질에 미치는 영향을 검토코저 1970-1971년 양년에 걸쳐 소사시험장 및 산지적응시험을 시도한 바 그 결과를 요약하면 다음과 같다. 1. 농도가 높을수록 잎담배 성숙을 촉진시키는 정도가 현저하며 그 효과는 처리후 3-4일부터 나타났다. 2. 열 표면에만 처리해도 효과가 있었으며 성숙촉진 효과는 처리 부분에만 뚜렷하였다. 3. C.E.P.A 처리 효과는 성숙기에 가까운 하위엽에서 뚜렷했고 상위엽에서는 완만하였고 성숙 정도에 따라 차이가 현저하였다. 4. C.E.P.A는 농도가 높을수록 성숙충족효과는 크지마는 900ppm 이상이 되면 잎의 신전율이 떨어져서 약간이나마 감수가 되며 3,000ppm에서는 약 9%의 수량 감을 가져 오므로 적정농도는 900ppm으로 볼 수 있다. 5. C.E.P.A의 성숙충족 일수를 보면 100ppm에서 1일, 300ppm 3일, 450ppm 3일, 900ppm 4일, 3000ppm에서 약 7일간 단축시킬 수가 있었다. 6. 건조 경과를 보면 C.E.P.A처리구는 무처리에 비하여 시간으로 약 29%의 건조시간과 45%의 연료를 절감할 수 있는 가능성이 엿보인다. 7. 그러므로 잎담배 재배에 있어 C.E.P.A를 적정농도(900ppm)로 처리하면 수량의 감소를 가져 오지 않으면서 품질에서 13.5% 수납대금에서 12%의 소득을 증대시킬 수 있으며 부수적인 효과로서 3,000ppm에 약 7일, 건조시간에서 약24시간을 단축시킬 수 있다고 본다.

• 공업화학
• /
• 제3권1호
• /
• pp.111-118
• /
• 1992

시차주사열량계(DSC)를 이용하여 에폭시 - 아민계의 경화 촉진을 연구하였다. 비스페놀 A의 디글리시딜에테르(DGEBA)든 촉진제와 함께 또는 촉진제 없이 메틸렌디아닐린(MDA)으로 경화시켰다. 본 연구를 위하여 트리스(디메틸아미노메틸페놀(DMP - 30)과 3 - (3,4 - 디클로로페닐) - 1,1 - 디메틸우레아(DIU-ON) 두 종류의 촉진제를 사용하였는데 경화시의 발열량, 유리전이온도($T_g$) 및 동적 DSC에 의한 활성화에너지 계산에 의해 DMP - 30이 빠른 경화 속도 및 낮은 활성화에너지를 보여 DIURON보다 양호한 촉진제임을 알 수 있었다.

• 한국건설순환자원학회논문집
• /
• 제7권4호
• /
• pp.121-127
• /
• 2012

본 연구에서는 플라이애시를 치환한 시멘트 모르터의 양생온도에 따른 강도증진을 검토하기 위하여 등가재령방법에 의한 강도증진해석을 실시하였다. 플라이애시를 30% 치환한 시멘트모르터의 겉보기활성화에너지를 ASTM C 1074 방법에 의하여 산정한 결과 34.75KJ/mol로 산정되었고, 이를 토대로 Plowman 모델과 Gompertz 모델을 이용하여 해석한 결과 해석치가 측정치를 양호하게 추정함을 알 수 있었고 특히 Gompertz 모델식이 보다 양호한 추정 정밀도를 갖는 것으로 확인되었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2007년도 추계 학술논문 발표대회
• /
• pp.133-136
• /
• 2007

This study investigates mechanical properties of the concrete using fine particle cement which is manufactured by the pulverizing process. The variable factors are 3 types of W/C such as 40, 50, and 60%, 3 types of curing temperature such as 5, 20, and $35^{\circ}C$, and 5types of the replacement of the fine particle cement such as 0, 25, 50, 75, and 100%. The unit water content, S/a and amount of the SP and AE agents to secure the slump and air content is gradually increased in accordance with amount of replacement. It can be confirmed that the delay of the setting time depending on FC content is decreased corresponding to FC content, so the effect of the acceleration to the setting time is expected. The compressive strength corresponding to FC content is proportionally increased, and the growth is confirmed about $30{\sim}40%$ at a day in 50% of FC contents. However, the increase of the strength is gradually decreased in accordance with increasing age.