• 제목/요약/키워드: Accelerating Rate

검색결과 180건 처리시간 0.027초

한약의 수치에 관한 연구(제 7보) -치자의 수치에 의한 성분변화 및 생리활성- (Studies on the Processing of Crude Drugs(VII) -On the Constituents and Biological Activities of Gardeniae Fructus by Processing-)

  • 신용욱;김동현;김남재
    • 생약학회지
    • /
    • 제34권1호통권132호
    • /
    • pp.45-54
    • /
    • 2003
  • We have conducted to characterize the physico-chemical change and pharmacological transformation of traditional herbal medicines by means of processing. Processed Gardeniae Fructus was prepared by heating of fruit of Gardenia jasminoides(GF) for $30{\sim}50\;minute$ in the roster designed for herb processing. The contents of drying loss, water extract, diluted ethanol extract, ether extract and geniposide in non-processed GF and processed GF were examined. The contents of drying loss, water extract and geniposide in processed GF showed a decrease as compared with those of non-processed GF, however the contents of dilute ethanol and ether extract showed a increase as compared with those of non-processed GF. The rate of decrease/increase of those index were in proportion to heating time. And, biological activities of methanol extract of non-processed GF and processed GF were investigated. DPPH scavenging effects and inhibitory effect of xanthine oxidate and hemolysis of processed GF exhibited more effective than those of non-processed GF in vitro. Accelerating effect of large intestinal transport and purgative action of non- processed GF were discriminated by processing of GF. Methanol extracts of non-pro- cessed GF and processed GF showed the protective effects against the hepatotoxicity induced by ${\alpha}-naphthylisothiocyanate$ in rats. These results suggested that the transformation of biological activities of GF by means of processing may be due to the physico-chemical change of the constituents in GF by heating.

기후변화에 따른 벼 적정 등숙기간의 변동과 대책 (Climate Change Impacts on Optimum Ripening Periods of Rice Plant and Its Counter-Measure in Rice Cultivation)

  • 윤성호;이정택
    • 한국작물학회:학술대회논문집
    • /
    • 한국작물학회 2000년도 추계 학술대회지
    • /
    • pp.28-45
    • /
    • 2000
  • It was unusual crop weather for 1998 and 1999 compared with normal in Korea. The consecutive days of the optimum ripening period for rice plant that had daily mean temperature 21-23C for 40 days after heading, increased with long anomalies in 1998-99. The air temperature during ripening period was much higher than the optimum temperature and lower sunshine hour than normal in the local adaptability tests of newly developed rice lines during those years. In response of rice cultivation to warming and cloudy weather during crop season, the yield shall be decreased. Most scientists agree that the rate of heating is accelerating and temperature change could become increasingly disruptive. Weather patterns should also become more erratic. Agrometeorologists could be analyzed yearly variations of temperature, sunshine hour and rainfall pattern focused on transient agroclimate change for last a decade. Rice agronomists could be established taking advantage of real time agricultural meteorology information system for fertilization, irrigation, pest control and harvest. Also they could be analyzed the characteristics of flowering response of the recommended and newly bred rice cultivars for suitable cropping plan such as cultural patterns and sowing or transplanting date. Rice breeders should be deeply considered introducing the characteristics of basic vegetative type of flowering response like Tonsil rices as prospective rice cultivars corresponding to global warming because of the rices needed higher temperature at ripening stage than Japonica rices, photoperiod sensitive and thermo-sensitive ecotypes

  • PDF

표상성을 중심으로한 공간 이미지화에 관한 연구 (A Study of imagification of space laying emphasis on representation)

  • 황용섭;박찬호
    • 한국실내디자인학회논문집
    • /
    • 제14권5호
    • /
    • pp.106-113
    • /
    • 2005
  • New images percolate through human consciousness by the media such as movies, TV programs, and brilliant advertisements. These images reproduce new ' things ' throughout the ' semantic processes ' by those who experience and recognize them. Alvin Toffler describes it as the ' information bomb ' and ' image fragments ' in his talk about the new paradigm of information-oriented era. The increasing number of images and their accelerating rate of appearance imply that images become more momentary, and are evidence that they are transforming entire human life and consciousness. Such awareness means a lot to a designer. Especially, the subject that how modern space-dominating images are related to the structure and materials constituting the space and communicate with human mind will be an important factor in establishing the human-space relationship in the future. Furthermore, the present age overspread with various medium is not the only one privileged of the images that exist within space. They are the results of continuous expansion of existing images, and also process of evolution of space powered by the fusion of images and digital media. Imagified space is a boundary layer of Cyberspace, and the space itself becomes an interface by human recognition and participation. Now, the functional classification of spaces such as ' office, ' ' cafe, ' and ' school ' is meaningless. Whatever it may be, the function of a space is defined by the information it interfaces, and therefore it becomes an interface to information through a large number of images. Based on this idea, we will observe the imagificaiton of space in the form of discussion, and from that, try to understand the phenomenon through the real world examples.

네트워크 외부효과를 고려한 두 단계 공급체인에서의 신기술 도입과 확산속도에 대한 연구 : 구매자-공급자간 관계 요인에 대한 모형 (Adoption and Diffusion Speed of New Technology with Network Externality in a Two-level Supply Chain : An Approach to Relative Factors in Buyer-Supplier Relationships)

  • 최대헌
    • 한국경영과학회지
    • /
    • 제38권3호
    • /
    • pp.51-70
    • /
    • 2013
  • This paper develops a model to predict the adoption and level of usage of network technology in a two-level supply chain with buyer-supplier relationships. A firm's adoption of a new technology depends not only on its own beliefs of the new technology's costs and benefits, but also on the adoption decisions of other firms in the supply chain. A model first analyzes an individual supplier's decision about a new technology adoption considering with multiple suppliers and buyers. Individual suppliers' decisions are aggregated with a population model to project how new technology diffuses across the supply chain and examine the pattern of diffusion process. This study found that as more firms adopt in initial periods, the total amount of information to the potential adopters in the population increases, and then the number of firms persuaded by the information increases as the process moves up the distribution of adoption process. We consider three factors influencing the diffusion speed of the new technology in a supply chain network : mean benefits, cost sharing, and information provision. This study examines how such factors affect the reduction of threshold levels, which implies that reductions in threshold levels have an aggregate effect by accelerating the rate of adoption. In particular, we explore relationship factors available in practice in a buyer-supplier relationship and numerically examines how these relationship factors contribute to increase the diffusion speed of the technology in a two-level supply chain.

Effectiveness of Bioremediation on Oil-Contaminated Sand in Intertidal Zone

  • Oh, Young-Sook;Sim, Doo-Suep;Kim, Sang-Jin
    • Journal of Microbiology and Biotechnology
    • /
    • 제13권3호
    • /
    • pp.437-443
    • /
    • 2003
  • Bioremediation technologies were applied to experimental microcosms, simulating an oil spill in a lower intertidal area. Three treatments (oil only, oil plus nutrients, and oil plus nutrients and microbial inocula) were applied, and each microcosm was repeatedly filled and eluted with seawater every 12 h to simulate tidal cycles. To minimize washing-out of the inoculum by the tidal cycles, microbial cells were primarily immobilized on diatomaceous earth before they were applied to the oiled sand. Oil degradation was monitored by gravimetric measurements, thin layer chromatography/flame ionization detector (TLC/FID) analysis, and gas chromatography (GC) analysis, and the loss of oil content was normalized to sand mass or nor-hopane. When the data were normalized to sand mass, no consistent differences were detected between nutrient-amended and nutrient/inoculum-amended microcosms, although both differed from the oil-only microcosm in respect of oil removal rate by a factor of 4 to 14. However, the data relative to nor-hopane showed a significant treatment difference between the nutrient-amended and nutrient/inoculum-treated microcosms, especially in the early phase of the treatment. The accelerating effect of inoculum treatment has hardly been reported in studies of oil bioremediation in the Tower intertidal area. The inoculum immobilized on diatomaceous earth seemed to be a very effective formulation for retaining microbial cells in association with the sand. Results of this study also suggest that interpretation of the effectiveness of bioremediation could be dependent on the selection of monitoring methods, and consequently the application of various analytical methods in combination could be a solution to overcome the limitations of oil bioremediation monitoring.

A Study on the Electrode Characteristics of Hypo-Stoichiometric Zr-based Hydrogen Storage Alloys

  • Lee, Sang-Min;Kim, Seoung-Hoe;Lee, Jai-Young
    • 한국수소및신에너지학회논문집
    • /
    • 제10권4호
    • /
    • pp.197-210
    • /
    • 1999
  • The hydrogen storage performance and electrochemical properties of $Zr_{1-X}Ti_X(Mn_{0.2}V_{0.2}Ni_{0.6})_{1.8}$(X=0.0, 0.2, 0.4, 0.6) alloys are investigated. The relationship between discharge performance and alloy characteristics such as P-C-T characteristics and crystallographic parameters is also discussed. All of these alloys are found to have mainly a C14-type Laves phase structure by X-ray diffraction analysis. As the mole fraction of Ti in the alloy increases, the reversible hydrogen storage capacity decreases while the equilibrium hydrogen pressure of alloy increases. Furthermore, the discharge capacity shows a maxima behavior and the rate-capability is increased, but the cycling durability is rapidly degraded with increasing Ti content in the alloy. In order to analyze the above phenomena, the phase distribution, surface composition, and dissolution amount of alloy constituting elements are examined by S.E.M., A.E.S. and I.C.P. respectively. The decrease of secondary phase amount with increasing Ti content in the alloy explains that the micro-galvanic corrosion by multiphase formation is little related with the degradation of the alloys. The analysis of surface composition shows that the rapid degradation of Ti-substituted Zr base alloy electrode is due to the growth of oxygen penetration layer. After comparing the radii of atoms and ions in the electrolyte, it is clear that the electrode surface becomes more porous, and that is the source of growth of oxygen penetration layer while accelerating the dissolution of alloy constituting elements with increasing Ti content. Consequently, the rapid degradation (fast growth of the oxygen-penetrated layer) with increasing Ti substitution in Zr-based alloy is ascribed to the formation of porous surface oxide through which the oxygen atom and hydroxyl ion with relatively large radius can easily transport into the electrode surface.

  • PDF

Effect of 630 nm Light Emitting Diode (LED) Irradiation on Wound Healing in Streptozotocin-Induced Diabetic Rats

  • 제갈승주
    • 대한의생명과학회지
    • /
    • 제16권4호
    • /
    • pp.365-376
    • /
    • 2010
  • The purpose of this study was to clarify the effect of light emitting diode (LED) irradiation on healing of impaired wound and alteration of mast cells in experimental diabetic rats. Twenty-four male Sprague-Dawley rats were divided into four groups: excision (Ex), excision-LED irradiation (Ex-LED), diabetes + excision (DM) and diabetes + excision + LED irradiation (DM-LED). Diabetes was induced in rats by streptozotocin (STZ) injection (70 mg/kg, single dose) and 6 mm punch excision wounds were created on the back after shaving hair. The LED-irradiated rats were treated to a daily dose of $5\;J/cm^2$ LED (630 nm) light for 11 days after surgery, and were killed at day 1, 3, 7 and 11. The lesion and adjacent skin tissues were excised, fixed with 10% buffered formalin and embedded with paraffin. For evaluation of wound healing, hematoxylin-eosin (HE) and Masson trichrome staining were performed. Mast cells (MCs) were stained with toluidine blue (pH 0.5) and quantified using a computerized image analysis system. The proliferation activity of keratinocyte in skin tissues was analyzed on sections immunostained with proliferative cell nuclear antigen (PCNA). The results showed that wound healing rate, collagen density and neo-epidermis length, number of PCNA-positive cells, fibroblasts and mast cells were significantly higher in the LED-irradiated rats than in the DM and Ex rats throughout the periods of experiment. Exceptionally, the number of MCs was significantly lower at day 11 compared with day 7 after surgery in the all groups. These findings suggest that the LED irradiation may promote the tissue repair process by accelerating keratinocyte and fibroblast proliferation and collagen production in normal rats as well as in diabetic rats, and MCs may play an important role at an early stage of skin wound healing in normal and diabetic rats.

아레니우스 방정식의 가속인자를 만족하는 절연저항특성 분석에 의한 케이블 수명평가 연구 (A Study on Cable Lifetime Evaluation Based on Characteristic Analysis of Insulation Resistance by Acceleration Factor of the Arrhenius Equation)

  • 엄기홍;이관우
    • 한국인터넷방송통신학회논문지
    • /
    • 제14권5호
    • /
    • pp.231-236
    • /
    • 2014
  • 오늘 날 산업이 발전함에 따라 전력에 대한 수요량이 증가하고 송전 용량이 커야할 필요성이 점차 요구되고 있다. 관련 설비들은 대규모화될 뿐만이 아니라 높은 신뢰성으로써 동작할 것을 요구받고 있다. 따라서 전기설비의 안정화는 매우 중요한 과제이다. 특히, 전기의 생산 및 공급 과정에서 요구되는 높은 신뢰성은 산업 사회의 필수적인 요소라고 할 수 있다. 설비의 사고 및 정전 사고등은 높은 전기적 의존을 가진 고도 산업사회에 막대한 경제적 손실 및 장애를 가져다준다. 우리는 이 논문에서 발전소에서 고전압의 생산 및 송배전의 유일한 전송 수단으로 사용하고 있는 고전압용 전력 케이블(power cable) 시스템의 안정된 동작을 판단하기 위하여, 아레니우스 인자를 따르는 절연 저항의 시간에 따른 변화추세를 파악하고, 열화의 마지막 단계로서 발생하는 파괴에 의한 케이블의 수명을 예측하고자 한다.

셀프 피트니스 의류 개발을 위한 근전도 센싱 위치 연구 (A Study of Sensing Locations for Self-fitness Clothing base on EMG Measurement)

  • 조하경;조상우
    • 한국의류산업학회지
    • /
    • 제18권6호
    • /
    • pp.755-765
    • /
    • 2016
  • Recently, interest in monitoring health and sports is growing because of the emphasis on wellness, which is accelerating the development and commercialization of smart clothing for biosignal monitoring. In addition to exerciseeffect monitoring clothing that tracks heart rate and respiration, recently developed clothing makes it possible to monitor muscle balance using electromyogram (EMG). The electrode for EMG have to attached to an accurate location in order to obtain high-quality signals in surface EMG measurement. Therefore, this study develops monitoring clothing suitable for different types of human bodies and aims to extract suitable range of EMG according to movements in order to develop self-fitness monitoring clothing based on EMG measurement. This study identified and attached electrodes on six upper muscles and two lower muscles of ten males in their 20s. After selecting six main motions that create a load on muscles, the 8-ch wireless EMG system was used to measure amplitude value, noise, SNR and SNR (dB) in each part and statistical analysis was conducted using SPSS 20.0. As a result, the suitable range for EMG measurement to apply to clothing was identified as four parts in musculus pectoralis major; three parts in muscle rectus abdominis, two parts each in shoulder muscles, backbone erector, biceps brachii, triceps brachii, and musculus biceps femoris; and four part in quadriceps muscle of thigh. This was depicted diagrammatically on clothing, and the EMG-monitoring sensing locations were presented for development of self-fitness monitoring.

베트남 CFBC 플라이애시를 사용한 지반고화재의 특성 (Properties of Ground Solidification Materials using Vietnam CFBC Fly Ash)

  • 김기석;이재원;이동원;유지형;즈엉수언호앙;하민;민경남
    • 자원리싸이클링
    • /
    • 제27권3호
    • /
    • pp.39-47
    • /
    • 2018
  • 베트남 정부는 석탄화력발전소 증설을 중심으로 한 발전용량확보 계획을 추진 중이며, 그에 따라 발전회의 발생량이 지속적으로 증가하고 있어 발전회 대량처리 방안 확보가 시급한 실정이다. 본 연구는 베트남에서 발생되는 발전회 중 순환유동층발전소 플라이애시를 지반고화재의 원료로 활용하기 위해 수행되었다. 플라이애시의 혼용이 지반고화재 성능에 미치는 영향을 확인하기 위해 대상 플라이애시와 고로슬래그, 석고, 시멘트 등을 사용하여 지반고화재를 제조하고, 이를 베트남 연약지반 토사와 혼합하여 시험체를 제작한 후 성능을 평가하였다. 그 결과, 28일 기준 강도 3 MPa 확보가 가능한 배합을 확인하였으며, 기존 보통 포틀랜드 시멘트만을 사용한 고화재 보다 내산성이 뛰어나 산 침지 시험에서 중량손실률을 절반이하로 감소시킬 수 있었다.