• Korean Journal of Agricultural Science
• /
• v.13 no.1
• /
• pp.90-102
• /
• 1986

This study was performed to obtain the basic data which can be applied to the use of concretes. The data was based on the properties of concrectes depending upon water-cement ratios and addings to compare those of plain concrete. The results obtained were summarized as follows; 1. In case the proper quantity of water reducing agent was added, unit weight of water is decreased to 12.9% with WR-LG of water reducing set standarding agent and to 8.6% with HF-SP of high fluid agent and to 17.2% with AH-WR of water reducing set accelerating agent, respectively, as compared with plain concrete. With the increase of water reducing agent content unit weight of water was greatly decreased. 2. The adding rate of water reducing agent which produce maximum strength was 0.2% with WR-LG and 0.4% with HF-SP and AH-WR, respectively. The increasing rates of strengths were showed that WR-LG is 24.1% and that HF-SP is 41.8% and that AH-WR is 43.3%, respectively, as compared with plain concrete. 3. The correlations between compressive and tensile strength were highly significant as a straight line. the multiple regression equations of compressive and tensile strength were computed with the variables of curing age and addition of water reducing agent. They were highly significant. 4. In case the proper quantity of water reducing agent was added, the correlations between water-cement ratio and compressive strength were highly significant as a straight line. The increasing rates of strength were showed higher than the decreasing rates of water cement-ratio.

• The Korean Journal of Pharmacology
• /
• v.20 no.1 s.34
• /
• pp.55-65
• /
• 1984

Comparative effects of $PGF_{2{\alpha}}$ and ouabain on the isolated rat(Sprague-Dowley) atria were studied. The isolated rat atria were prepared for isometric myography in the isolated organ bath containing Feigen's solution perfused with 95% $O_2$ and 5% $CO_2$, and the pH of the medium was maintained at 7.4. The cumulative concentration-response relationship revealed the positive inotropic effects of both drugs with the higher potency of $PGF_{2{\alpha}}$ and the higher efficacy of ouabain. $PGF_{2{\alpha}}$ showed a positive chronotropic effect, but ouabain showed a tendency of increasing the contraction rate. In low-Ca(1.4 mM) medium, the positive inotropic and chronotropic effect of $PGF_{2{\alpha}}$(by $3{\times}10^{-8}M$) were preponderant $(p<0.05{\sim}p<0.005)$ over those of ouabain(by $3{\times}10^{-3}M$). $Ca^{++}$-addition(cumulative, to 2.8, 4.2, 5.6, and 7.0 mM) into the medium evoked the more sensitive response in the $PGF_{2{\alpha}}$ group than in the ouabain group. In low-K(2.8 mM) medium, the $PGF_{2{\alpha}}a(3{\times}10^{-8}M)$ group and the ouabain$(3{\times}10^{-3}M)$ group showed similar tensions(DT and RT) and contraction rates. And both group showed significantly(p<0.05p<0.01) higher tensions and contraction rates than those of the control group. By the cumulative addition of the $K^+$(to 4.2, 5.6, 7.0 and 8.4 mM), only the DT of the $PGF_{2{\alpha}}$ group was sustained at signifcantly$(p<0.05{\sim}p<0.01)$ higher level than the DT of the control group. The $K^+$-addition inhibited the positive inotropic effect of ouabain significantly (p<0.05). The cumulative addition of lidocaine in high concentrations $(1{\times}10^{-5}\;to\;1{\times}10^{-3}M)$ evoked no significant influence on the intropic activities of $PGF_{2{\alpha}}$ and ouabain, but significant ${\beta}$-blockade with propranolol could not inhibit the positive intropic and chronotropic effect of $PGF_{2{\alpha}}$. In conclusion, it is presumed that $PGF_{2{\alpha}}$ may have some more active mechanism of accelerating the influx of $Ca^{++}$ across the cell membrane of the isolated rat atria as compared with ouabain, and the action site may be located at the cell membrane. As a supposition which needs further investigations, it is presumed that $PGF_{2{\alpha}}$ may have its specific membrane receptors on the atrial muscle or sinus node cells.

• Journal of the Korean Academic Society of Industrial Cluster
• /
• v.1 no.1
• /
• pp.67-86
• /
• 2007

Wonju Medical Equipment Industry, despite of its short history, poor sales and weak manpower and so on, have shown remarkable outcomes in a relatively short period. At the end of 2007, totally 79 enterprises (only 4.6% of whole enterprises in Korea) made 10% of the nationwide production and 15% of the nationwide exports with an annual average growth rate of 66.7%, contributing domestic medical equipment industry tremendously. In addition, many leading medical equipment enterprises in various fields already moved or plan to move to Wonju, accelerating Wonju Medical Equipment Cluster. Wonju Medical Equipment Industry Cluster now enters into the growth stage, getting out of the initial business setup stage. Especially, the nomination of Wonju cluster project from the government accelerates networking (e.g. the development of the universal parts, the establishment of the mutual collaboration model among enterprises, and the mutual marketing), making a rapid growth in Wonju Medical Equipment Industry. Wonju Medical Equipment Industry Cluster revealed positive outcomes despite of the weakness in investment size and infra-structure comparing with the other medical industry cluster in the advanced country, while many domestic enterprises pursued their own growth models and thus failed to promote the international competitive power. Wonju Medical Equipment Industry has been developed rapidly. However, there are many challenging problems to support enterprises: small R&D investment and thus weak technology power, difficulties in recruiting R&D engineers, and poor marketing capabilities, financial infrastructure & policies, and network architecture. In order to develop a world-competitive medical equipment industry cluster at Wonju, the complement of infrastructures, the technology innovation, the mutual marketing, and the network expansion to support enterprises are further required. Wonju' s experiences in developing medical equipment industry so far suggest that our own flexible cluster model considering the industry structure and maturity for different regions should be developed, and specific action plans from the local and central governments based on their systematic strategies for industry development should be implemented in order to build world-competitive industry clusters in Korea.

• Clinical and Experimental Pediatrics
• /
• v.48 no.5
• /
• pp.518-522
• /
• 2005

Purpose : To evaluate the effect of inhaled hypertonic saline solution in hospitalized infants with bronchiolitis. Methods : A randomized double blind trial was performed from October 2003 to May 2004. A total of eighty patients <1 year of age with a clinical diagnosis of acute viral bronchiolitis were enrolled and assigned to receive either of the following : inhalation of 2 mL(0.5 mg) fenoterol added to 2 mL of 0.9 percent saline solution(group 1; n=40) or 2 mL(0.5 mg) fenoterol added to 2 mL of 3 percent saline solution(group 2; n=40). This therapy was repeated at six hours interval after admission. They were evaluated daily just before and 20 minutes after nebulization. The outcome measures included changes in clinical severity score(based on respiratory rate, presence of wheezing, retraction, and general condition) after nebulization and duration of hospitalization. Results : In the clinical severity score, a significant improvement was observed during the 72 hours of hospitalization in both groups(P<0.05). The basic clinical severity scores before inhalation were decreased significantly faster in group 2 as compared to group 1 on each day of treatment(P<0.05). The mean duration of hospital stay was significantly reduced in group 2 than group 1($5.9{\pm}1.9days$ versus $7.4{\pm}2.0days$, P<0.05). No adverse effects were associated with inhaled therapy. Conclusion : These results suggest that a nebulized 3 percent saline solution plus 0.5 mg fenoterol may be more effective than a 0.9 percent saline solution plus 0.5 mg fenoterol in accelerating the clinical recovery of infants with viral bronchiolitis.

• The Korean Journal of Air & Space Law and Policy
• /
• v.31 no.2
• /
• pp.99-143
• /
• 2016

General aviation and air transport are two wings of the civil aviation industry. Chinese air transport is developing rapidly, and has become the world second air transport system only second to US since 2005. However, Chinese civil aviation is far behind the world average level, and cannot meet requirements of economic construction and social development. The transition and structural adjustment of Chinese economy provide the general aviation with a unprecedented broad market. The prospect of general aviation is promising and anticipated. The development of general aviation industry needs the legislative supports, and the current legislative conditions of Chinese general aviation are undoubtedly far behind the realistic requirements. Accelerating the legislation in Chinese general aviation industry requires scientific legislation concept. First, Legislation must promote development of general aviation industry. The general aviation will serves as a Chinese emerging industry that boosts domestic demand, promotes employment and expedite domestic economic development. We should, based on both the concept of promoting the industrial development of general aviation and national industrial planning, enact and rectify relative laws and regulations. And we should also straighten out the relationship between aviation security and industrial development and promote the revolution of low-altitude airspace management in an all-round way, in order to improve the utilization rate of airspace resources, classify and establish airspace, simplify examination and approval procedure and intensify operation management. In addition, what we should do is to expedite the infrastructure layout construction, guide the differentiated but coordinated development of general aviation industries in various areas, establish a united supervision mechanism of general aviation, redistrict the responsibilities of Chinese Air Control Agency and set up legislation, law enforcement and judicial systems with clarified institutions, clear positioning and classified responsibilities, so as to usher in a new era of the legislative management of Chinese general aviation industry. Second, shift the focus from regulations to both regulations and services. Considering the particularity of the general aviation, we should use American practices for reference and take into account both regulation and service functions when enacting general aviation laws. For example, we should reduce administrative licensing and market supervision, and adopt "criteria" and "approval" management systems for non-commercial and commercial aviation. Furthermore, pay attention to social benefits. Complete social rescuing mechanism through legislation. It should be clarified in legislation that general aviation operators should take the responsibilities of, and ensure to realize social benefits of environmental protection and ecological balance .Finally, rise in line with international standards. Modify Chinese regulations which is inconsistent with international ones to remove barriers to international cooperation. Specify basic legislative principles. One is the principle of coordination. Realize coordination between the civil aviation and general aviation, between military aviation and civil aviation, and among departments. Two is the principle of pertinence. The general aviation has its own rules and specialties, needing to be standardized using specialized laws and regulations. Three is the principle of efficiency. To realize time and space values of general aviation, we should complete rules in aerospace openness, general aviation airport construction, general aviation operations, and regulation enforcement. Four is the principle of security. Balance the maximum use of resources of Chinese airspace and the according potential threats to Chinese national interests and social security, and establish a complete insurance system which functions as security defense and indemnificatory measure. Establish a unified legal system. Currently, the system of Chinese general aviation laws consists of national legislation, administrative laws and regulations and civil aviation regulations (CAR). Some problems exist in three components of the system, including too general content, unclear guarantee measures, incomplete implementation details, and lacking corresponding pertinence and flexibility required by general aviation regulations, stringency of operation management and standards, and uniformity of standards. A law and regulation system, centered on laws and consisting of administrative laws regulations, industrial regulations, implementation details, industrial policies and local laws and regulations, should be established. It is suggested to modify the Civil Aviation Law to make general aviation laws complete, enact the Regulations of General Aviation Development, and accelerate the establishment, modification and abolition of Chinese general aviation laws to intensify the coordination and uniformity of regulations.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.6
• /
• pp.715-721
• /
• 2007

Residual calcium concentration is high, in general, at the effluent of the fluoride removal process in the electronics industry manufacturing semiconductor and LCD. To increase the stability of the membrane process incorporated for reuse of wastewater, the residual calcium is required to be pre-removed. Hyperkinetic Vortex Crystallization(HVC) process was installed in the electronics industry manufecturing semi conductor as a pilot scale for accelerating calcification of calcium ion. Compared to the conventional soda ash method, the 31% higher calcium removal efficiency was achieved when HVC was applied at the same sodium carbonate dosage. In order to maintain the economic calcium removal target of 70% preset by manufacturer, the dosing concentration of the soda ash was 530 mg/L based on influent flowrate. The seed concentration in the reactor was one of the critical factors and should be maintained in the range of $800\sim1,200mg$ SS/L to maximize the calcium removal efficiency. The calcite production rate was 0.30 g SS/g $Na_2CO_3$ in the average. The economic HVC passing time of the mixture was in the range of $2\sim5$ times. Relatively, stable calcium concentration was maintained in the range of $30\sim72$ mg/L(average 49 mg/L) although the calcium concentration in the feed was severely fluctuated with $74\sim359$ mg/L(average 173 mg/L). The HVC process was characterized as environment-friendly technology reducing chemical dosage and chemical sludge production and minimizing maintenance cost.

• Journal of Preventive Medicine and Public Health
• /
• v.17 no.1
• /
• pp.173-192
• /
• 1984

On the basis of the study intended to research by crosssectional study keeps pace with semilongitudinal study the growthaccelerating phenomena that Maximum Growth age in teenager's body-height. By the random sampling method, the subject of study are 12659 persons(male; 6355, female; 6304) that they are from 7 ages to 17 ages in the whole country including the rural community. The measurement period passed three month days, the statistical data became electronic data processing system with computer. The other side, body-height and MGA of Koreans who had been for during the period from 1925 to 1966 proved transition of the growth-accelerating phenomena by research data reported between 1913 and 1983. The results are as follows; 1. The Growth and Development-Value of Body-height An age bracket the growth and development-value of body-height were, respectively, male is $123.88{\pm}5.05cm$ and female is $123.29{\pm}5.54cm$ for 7 ages group. these indices increased with age. the top-value reach, respectively. $169.08{\pm}5.62cm$ and $157.57{\pm}6.13cm$. The intersecting ages of male and female were the age $8.5{\sim}12.5$, during these periods, female excelled male but after these periods, male excelled female again. In case of body-height, MGA's are 7.0cm for male between 12 and 13 ages, and 7.01cm for female between 8 and 9 ages. As a rule, body-height of male excelled female but intersection phenomena of male and female appeared between 8.5 and 12.5 ages. By reginal groups, it is most prevailing is Seoul, and medium size cities and rural community rome in order. By regional groups, intersection phenomena of male and female are. a region of Seoul; $$8.5{\sim}11.5$$ ages a region of Daejeon; $$7.5{\sim}9.5$$ ages rural community; $$11.5{\sim}14.5$$ ages the whole country's average; $$8.5{\sim}12.5$$ ages By regional groups, the rate of maximum increase in a year are a region of Seoul; male is 7.23cm as 13 ages female is 7.65cm as 9 ages. a region of Daejeon; male is 7.85cm as 11 ages. female is 8.39cm as 9 ages. rural community; male is 7.65cm as 14 ages. female is 6.25cm as 12 ages. the whole country's average; male is 7.0cm as 13 ages. female is 7.01 as 9 ages. 2. Maximum Growth Age (M.G.A.) By reginal groups, maximum Growth Age's are as below in a region of Seoul, MGA's are 12.63 for male and 9.01 for female, which shows that MGA for female appears about 3.5 years earlier than that for male. In a region of Daejeon, MGA's are 9.20 for male and 8.93 for female, which. show that they are all much the same in M.G.A. In rural community, MGA's are 14.00 for male and 11.89 for female, which shows that MGA for female apperars about 2 years earlier than that for male. In the whole average, MGA's are 13.01 for male and 8.97 for femal, which shows that for female appears about 4 years earlier than that for male. For boy, M.G.A. shows fastest-growing in Daejeon, and Seoul and rural commonly come in order. For girl, It shows equal growth in Seoul and Daejeon, rural community comes later. 3. The M.G.A's in body height of male are respectively the age 15.02 in 1913, 14.23 in 1956, 13.86 in 1967, 13.62 in 1975, and 12.82 in 1981, while those of female are the age 12.0 in 1940, 11.52 in 1965, 9.53 in 1975, and 11.16 in 1980; these data show that the MGA of the Koreans has been getting younger. 4. The equation of linear regression of all the MGA's in body height are as follow; Male: Y(M.G.A)=$-0.020{\times}$ (the year)+15.19: female:Y(MGA)=$-0.028{\times}$(the year)+13.2549. 5. The corelation of all the MGA's in body height are as below; male; r=-0.329 female;r=-0.252 6. From the transition of the growth-accelating phenomena in 1980 we can capture the fact that the MGA's has been getting younger by 0.2 year per 10 years. 7. The MGA's in bodyheight are shown in table 4... 8. The future growth-accelating phenomena in body height are expected to show the similar tendency like that of the past, in 1910's but it should by more precisely reviewed after investigating the phenomena of the years directly ahead.

• Tuberculosis and Respiratory Diseases
• /
• v.54 no.4
• /
• pp.439-448
• /
• 2003

Background : Surfactant protein B(SP-B) and surfactant protein C(SP-C) are important in accelerating surface spreading of surfactant phospholipid. The glucocorticoids accelerate the morphologic differentiation of epithelial cells into type II cells and increase the rate of phosphatidylcholine synthesis. The hydrophobic surfactant protein has been shown to be upregulated by glucocorticoids in vitro, however, its regulation in vivo is not well established. Methods : The authors investigated the effects of glucocorticoid on the accumulation of mRNA encoding SP-B and SP-C protein content of the lung. Adult rats were given different doses of subcutaneous dexamethasone and sacrificed at 24 hours and 1 week. SP-B and SP-C mRNA were measured by a filter hybridization method. Results : 1) The accumulation of SP-B mRNA at 24 hours after 0.2 mg/kg dexamethasone treatment was increased by 23.7%. 2) The accumulation of SP-B mRNA at 1 week after 2 mg/kg dexamethasone treatment was significantly increased by 96.6%(P<0.001). 3) The accumulation of SP-C mRNA at 24 hours after 0.2 mg/kg dexamethasone treatment was significantly increased by 42.7%(P<0.01). 4) The accumulation of SP-C mRNA at 1 week after 2 mg/kg dexamethasone treatment was significantly increased by 60.0% (P<0.01). Conclusion : The authors concluded that dexamethasone treatment in vivo resulted in increased levels of SP-B mRNA and SP-C mRNA. These results suggested that dexamethasone stimulates the synthesis of hydrophobic proteins associated with surfactant.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.30 no.4
• /
• pp.5-13
• /
• 2022

The current environmental problem is that environmental pollution is accelerating due to the generation of large amounts of waste and indiscriminate consumption of energy. Fossil fuels, a representative energy production fuel, are burned in the process of producing energy, generating a large amount of greenhouse gases and eventually causing climate change. In addition, the amount of waste generated worldwide is continuously increasing, and environmental pollution is occurring in the process of waste treatment. One of the methods for simultaneously solving these problems is the energy recovery from and reduction of organic wastes. Sewage sludge generated in sewage treatment plants has been treated in various ways since ocean disposal was completely prohibited, but the amount generated has been continuously increasing. Since the sewage sludge contains a large amount of organic materials, it is desirable to recover energy from the sewage sludge and reduce the final discharged waste through anaerobic digestion. However, most of the excess sludge is a mass of microorganisms used in sewage treatment, and in order for the excess sludge to be anaerobically digested, the cell walls of the microorganisms must be destroyed first, but it takes a lot of time to destroy the cell walls, so high rates of biogas production and waste reduction cannot be achieved only by anaerobic digestion. Therefore, the pre-treatment process of solubilizing excess sludge is required, and the thermal solubilization process is verified to be the most efficient among various solubilization methods, and high rates of biogas production and waste reduction can be achieved by anaerobic digestion after destroying cell walls the thermal solubilization process. In this study, when pretreating TS 10% thickened excess sludge through a thermal solubilization system, a study was conducted on solubilization characteristics according to retention time and operating temperature variables. The experimental variables for the retention time of the thermal solubilization system were 30 minutes, 60 minutes, 90 minutes, and 120 minutes, respectively, while the operating temperature was fixed at 160℃. The soulbilization rates calculated through TCOD and SCOD derived from the experimental results increased in the order of 12.11%, 20.52%, 28.62%, and 31.40%, respectively. And the variables according to operating temperature were 120℃, 140℃, 160℃, 180℃, and 200℃, respectively, while the operating retention time was fixed at 60 minutes. And the solubilization rates increased in the order of 7.14%, 14.52%, 20.52%, 40.72%, and 57.85%, respectively. In addition, TS, VS, T-N, T-P, NH₄⁺-N, and VFAs were analyzed to evaluate thermal solubilization characteristics of thickened excess sludge. As a result, in order to obtain 30% or more solubilization rate through thermal solubilization of TS 10% thickened excess sludge, 120 minutes of retention time is required when the operating temperature is fixed to 160℃, and 170℃ or more of operating temperature is needed when the operating time is fixed to 60 minutes.

• Radiation Oncology Journal
• /
• v.23 no.3
• /
• pp.186-193
• /
• 2005

Purpose: To improve the management of a medical linear accelerator, the records of operational failures of a Varian CL2l00C over a ten year period were retrospectively analyzed. Materials and Methods: The failures were classified according to the involved functional subunits, with each class rated Into one of three levels depending on the operational conditions. The relationships between the failure rate and working ratio and between the failure rate and outside temperature were investigated. In addition, the average life time of the main part and the operating efficiency over the last 4 years were analyzed. Results: Among the recorded failures (total 587 failures), the most frequent failure was observed in the parts related with the collimation system, including the monitor chamber, which accounted for $20\%$ of all failures. With regard to the operational conditions, 2nd level of failures, which temporally interrupted treatments, were the most frequent. Third level of failures, which interrupted treatment for more than several hours, were mostly caused by the accelerating subunit. The number of failures was increased with number of treatments and operating time. The average life-times of the Klystron and Thyratron became shorter as the working ratio increased, and were 42 and $83\%$ of the expected values, respectively. The operating efficiency was maintained at $95\%$ or higher, but this value slightly decreased. There was no significant correlation between the number of failures and the outside temperature. Conclusion: The maintenance of detailed equipment problems and failures records over a long period of time can provide good knowledge of equipment function as well as the capability of predicting future failure. Wore rigorous equipment maintenance Is required for old medical linear accelerators for the advanced avoidance of serious failure and to improve the qualify of patient treatment.