• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.43 no.5 s.311
• /
• pp.68-75
• /
• 2006

Multimedia fingerprinting protects multimedia content from illegal redistribution by uniquely marking every copy of the content distributed to each user. Differ from a symmetric/asymmetric scheme, fingerprinting schemes, only regular user can know the inserted fingerprint data and the scheme guarantee an anonymous before recontributed data. In this paper, we present a scheme which is the algorithm using LDPC(Low Density Parity Check) for detection of colluded multimedia fingerprint and correcting errors. This proposed scheme is consists of the LDPC block, Hopfield Network and the algorithm of anti-collusion code generation. Anti-collusion code based on BIBD(Balanced Incomplete Block Design) was made 100% collusion code detection rate about the linear collusion attack(average, AND and OR) and LD% block for the error bits correction confirmed that can correct error until AWGN 0dB.

• Clinical and Experimental Reproductive Medicine
• /
• v.27 no.2
• /
• pp.173-177
• /
• 2000

연구목적: 한국여성의 다낭성 난포증후군 환자에서 황체형성 호르몬 exon 2 유전자의 변이를 탐색하여 이들 변이와 질환과의 관련성 여부를 밝히고자 하였다. 연구재료 및 방법: 21명의 다낭성 난포증후군 환자를 대상으로 황체형성 호르몬 exon 2(Trp8Arg;TGG to CGG and Ile15Thr; ATC to ACC)의 변이를 탐색하였다. 혈액에서 Genomic DNA를 추출하여 PCR로 증폭한 후 RFLP 방법으로 변이형을 구분하였다. 결과: 황체형성 호르몬 exon 2의 변이형이 다낭성 난포증후군 환자에서 28.6%로 이미 조사된 바 있는 대조군의 16.7% 보다 약간 높게 나타났으나 통계적으로 유의한 차이는 없었다(p>0.05). 결론: 황체형성 호르몬 exon 2의 변이가 한국인의 다낭성 난포증후군 발병과 관련이 있는지를 밝히기 위해 더 많은 개체에 대한 연구가 요구된다.

• Clinical and Experimental Reproductive Medicine
• /
• v.27 no.2
• /
• pp.179-182
• /
• 2000

This study was performed to determine whether the $LH{\beta}$-subunit gene missense mutation is present in Korean infertile patients with 46,XX POF women. The variants of $LH{\beta}$ exon 2 (Trp 8Arg; TGG to CGG and Ile15Thr; ATC to ACC) were studied in forty-four 46,XX idiopathic POF and 54 nonpregnant women. The $LH{\beta}$ exon 2 variants were more frequent in POF patients (20.5%) than nonpregnant (16.7%) women (p>0.05). POF patients with the variant was slightly higher than nonpregnant women with the variant.

• Advances in concrete construction
• /
• v.4 no.2
• /
• pp.71-88
• /
• 2016

Metakaolin, a dehydroxylated product of the mineral kaolinite, is one of the most valuable admixtures for high-performance concrete applications, including constructing reinforced concrete bridges and impact- and fire-resistant structures. Concretes produced using metakaolin become more homogeneous and denser compared to normal-strength concrete. Yet, these changes cause a change of volume throughout hardening, and increase the brittleness of hardened concrete significantly. In order to examine how the use of metakaolin affects the fracture and mechanical behavior of high-performance concrete we produced concretes using a range of water to binder ratio (0.42, 0.35 and 0.28) at three different weight fractions of metakaolin replacement (8%, 16% and 24%). The results showed that the rigidity of concretes increased with using 8% and 16% metakaolin, while it decreased in all series with 24% of metakaolin replacement. Similar effect has also been observed for other mechanical properties. While the peak loads in load-displacement curves of concretes decreased significantly with increasing water to binder ratio, this effect have been found to be diminished by using metakaolin. Pore structure analysis through mercury intrusion porosimetry test showed that the addition of metakaolin decreased the critical pore size of paste phases of concrete, and increasing the amount of metakaolin reduced the total porosity for the specimens with low water to binder ratios in particular. To determine the optimal values of water to binder ratio and metakaolin content in producing high-strength and high-performance concrete we applied a multi-objective optimization, where several responses were simultaneously assessed to find the best solution for each parameter.

• Advances in concrete construction
• /
• v.4 no.2
• /
• pp.123-143
• /
• 2016

Use of heavy fuel fly ash (HFFA) (diesel and cracked fuel) for power generation in Saudi Arabia has generated and accumulated large quantities of HFFA as a byproduct. In this research, HFFA is studied with the emphasis on the utilization of this waste material in concrete blocks and asphalt concrete mixes. Two types of mixes, one with low and other with high cement content, were studied for concrete blocks. Different mixes having varying percentages of HFFA (0% to 25%), as cement/sand replacement or as an additive, were studied. The performance of concrete blocks is evaluated in terms of compressive strength, water absorption, durability and environmental concerns. The results showed that blocks cannot be cast if more than 15% HFFA is used; also there is a marginal reduction in the strength of all the mixes before and after being exposed to the sulfate solution for a period of ten months. HFFA is studied in asphalt concrete mixes in two ways, as an asphalt modifier (3&5%) and as a filler (50%) replacement, the results showed an improvement in stiffness and fatigue life of mixes. However, the stability and indirect tensile strength loss were found to be high as compared to the control mix due to moisture damage, indicating a need of using antistripping agents. On environmental concerns, it was found that most of the concerned elements are within acceptable limits also it is observed that lower concentration of barium is leached out with the higher HFFA concentrations, which indicates that HFFA may work as an adsorbent for this leaching element.

• Advances in concrete construction
• /
• v.6 no.5
• /
• pp.423-463
• /
• 2018

This paper investigates the behavior of normal and self-compacted steel fiber reinforced concrete (SCC-SFRC) corbels rehabilitated by Basalt Fiber Mesh (BFM) and Basalt Fiber Fabric (BFF) for the first time in literature. The research objective is to study the effectiveness of BFM and BFF in the rehabilitation of damaged reinforced concrete corbels with and without epoxy injection. The experimental program includes two types of concrete: normal concrete, and self-compacted concrete. For normal concrete, 12 corbels were rehabilitated by BFM without injection epoxy in cracks, with two values of compressive strength, three ratios of steel fiber (SF), and two values of shear span. For self-compacted concrete, 48 corbels were rehabilitated with different parameters where 12 corbels were rehabilitated by BFM with and without epoxy injection, 18 heated corbels with three different high-temperature level were rehabilitated by repairing cracks only by epoxy injection, and 18 heated corbels with three different high-temperature level were rehabilitated by repairing cracks by epoxy and wrapping by BFF. All 48 corbels have two values of compressive strength, three values volumetric ratios of SF, and two values of the shear span. Test results indicate that RC corbels rehabilitated by BFM only without injection did not show any increase in the ultimate load capacity. Moreover, For RC corbels that were repaired by epoxy without basalt wrapping, the ultimate load capacities showed an increase depending on the mode of failure of corbels before the rehabilitation. However, the rehabilitation with only crack repairing by epoxy injection is more effective on medium strength corbels as compared to high strength ones. Finally, it can be concluded that use of BFF is an effective and powerful technique for the strengthening of damaged RC corbels.

• Journal of the Ergonomics Society of Korea
• /
• v.32 no.3
• /
• pp.217-227
• /
• 2013

Objective: The purpose of this study was to analyze 'response time', 'peak response time' and 'overshoot value' for each muscle by applying the EMG signal to the vehicle response in ISO 7401 and to quantify the response of the driver according to vehicle characteristics by comparing vehicle characteristics and muscle responses of the driver. Background: The Open-loop test defined in international standards ISO 7401 is the only method for evaluating the performance of the vehicle. However, this test was focused only on mechanical responses, not driver's ones. Method: One skilled male driver(22 yrs. experience) was participated in this experiment to measure muscle activities of the driver in transient state. Then the seven muscle signals were applied to calculate 'response time', 'peak response time', and 'overshoot value'. Results: In the analyses of the EMG data, the effects of vehicle type and muscle were statistically significant on the 'response time' and 'peak response time'. Also, the effects of vehicle type, muscle, and lateral acceleration level were statistically significant on the 'overshoot value' in this study. According to the analyses of the vehicle motion data, vehicle motion variable(LatAcc, Roll, YawVel) was statistically significant on the 'response time' and vehicle type, vehicle motion variable, and lateral acceleration level were statistically significant on the 'peak response time', respectively. Conclusion: In the analyses of the 'response time' and 'overshoot value', the data of muscle activities(EMGs) was better index that could evaluate the vehicle characteristic and performance than the data of vehicle motion. In case of peak response time, both EMG and vehicle motion data were good index. Application: The EMGs data from a driver might be applicable as index for evaluation of various vehicle performances based on this study.

• Nuclear Engineering and Technology
• /
• v.48 no.1
• /
• pp.55-63
• /
• 2016

Calculation of the core neutronic parameters is one of the key components in all nuclear reactors. In this research, the energy spectrum and spatial distribution of the neutron flux in a uranium target have been calculated. In addition, sensitivity of the core neutronic parameters in accelerator-driven subcritical advanced liquid metal reactors, such as electron beam energy ($E_e$) and source multiplication coefficient ($k_s$), has been investigated. A Monte Carlo code (MCNPX_2.6) has been used to calculate neutronic parameters such as effective multiplication coefficient ($k_{eff}$), net neutron multiplication (M), neutron yield ($Y_{n/e}$), energy constant gain ($G_0$), energy gain (G), importance of neutron source (${\varphi}^*$), axial and radial distributions of neutron flux, and power peaking factor ($P_{max}/P_{ave}$) in two axial and radial directions of the reactor core for four fuel loading patterns. According to the results, safety margin and accelerator current ($I_e$) have been decreased in the highest case of $k_s$, but G and ${\varphi}^*$ have increased by 88.9% and 21.6%, respectively. In addition, for LP1 loading pattern, with increasing $E_e$ from 100 MeV up to 1 GeV, $Y_{n/e}$ and G improved by 91.09% and 10.21%, and $I_e$ and $P_{acc}$ decreased by 91.05% and 10.57%, respectively. The results indicate that placement of the Np-Pu assemblies on the periphery allows for a consistent $k_{eff}$ because the Np-Pu assemblies experience less burn-up.

• Journal of Korean Medicine Rehabilitation
• /
• v.28 no.2
• /
• pp.1-20
• /
• 2018

Objectives This study was conducted to experimentally evaluate the effects of Younggyechulgam-tang-ga Hwanggi(YGT) on obesity in mice induced by high fat diet. Methods The experiment was conducted with 4-week-old male mice divided into 5 groups. They were a normal diet group(Nor), a high fat diet group(Veh), a positive drug control group-orlistat 40 mg/kg(Oris), a 1.08 g/kg group(YGTL), and a 2.16 g/kg group(YGTH), and were tested for five weeks. Changes in antioxidant activity, body weight, organ weight, ROS, AST, ALT, TC, TG, HDL-C, LDL-C and lipid metabolism protein were checked. Results YGTL and YGTH group significantly reduced body weight compared to Veh group. YGTH group significantly reduced visceral fat weights compared to Veh group. In blood biochemistry analysis, ROS, AST, ALT, TC, TG and LDL-C in YGTL and YGTH group were significantly lower than Veh group. HDL-C increased significance in YGTL and YGTH group. In antioxidation protein analysis, Catalase, GPx and HO-1 have increased significantly in YGTL and YGTH group. YGTH group have increased $PPAR-{\alpha}$, p-AMPK compared to Veh group. but decreased FAS. SREBP-1, p-ACC levels in YGTL and YGTH group were decreased compared to Veh group, however CPT-1, UCP-2 levels in YGTL and YGTH group were increased compared to Veh group. Conclusions YGT has anti-obesity effects by regulating lipolysis and antioxidation in a diet-induced obesity model. Additional clinical studies are needed.

• Journal of Chest Surgery
• /
• v.33 no.12
• /
• pp.954-958
• /
• 2000

배경: 헤파린표면처리 도관(Heparin-coated circuit: HCC)이 도관과 혈액사이의 반응(Blood-marterial reaction)을 줄여주어서 보체활성화(complement activation), 백혈구활성화(leukocyte activation)와 사이토킨 분비(cytokinerelease)등을 감소시켜 준다. 그러나 HCC가 수술 후에 출혈 양을 줄여주고 헌혈 필요량을 감소시켜 준다는 임상적 효과에 대해서는 인정된 부분이 많으나 아직까지 그 기전은 대부분은 미지의 상태로 남아있는 것이 사실이다. 본 연구는 HCC를 사용한 군(Group H)과 사용하지 않은 군(Group C)간에 심폐기 사용기간(Pumptime), 활성화 응고시간(activated clotting time: ACT)과 헤파린 사용량을 비교 분석해 봄으로서 두 군간에 존재할 수 있는 헤파린 사용량을 비교 분석해 본으로서 두 군간에 존재할 수 있는 헤파린 사용량 차이에 대하여 알아보려고 하게되었다. 대상 및 방법: 본원에서 1999년 5월 1일부터 동년 12월 31일 사이에 연령이 16세 이상인 환자에서 HCC를 사용했던 16명(Group H)과 사용하지 않았던 19명(Group C)을 대상으로 하였다. 모든 환자에서 수술 전 체중, 신장, 체표면적, 심폐기 사용시간(pumptime), 수술 중 최저체온, 대동맥 차단시간(Aortic cross clamping time. ACC time), ACT, 헤파린 및 프로타민 사용 양 등을 조사하였다. 결과: 연구대상 환자의 연령, 체중, 신장, 체표면적, 대동맥차단 시간, 체온 등은 HCC를 사용한 군(H 군)과 사용하지 않은 군(C군)간에 의미 있는 차이가 없었다(p<0.05). 헤파린 공급 전, 공급 후 20분, 40분, 60분과 프로타민 공급 후 20분에 측정한 ACT는 두 군간에 의미 있는 차이가 없었다. 두 군간의 처음에 공급한 헤파린 양과 총 프로타민 사용량은 차이가 없었으나(p>0.05), 추가 공급한 헤파린 양(11$\pm$30 versus 67$\pm$49mg, p<0.05)과 총 헤파린 사용량(176$\pm$44 versus 239$\pm$70mg, p<0.05)은 H군에서 의미 있게 적게 나왔다. 두 군간에서 심폐기 사용시간에는 차이가 없었으면서 H군에서 약 38%정도의 헤파린을 적게 사용하였다. 결론: 결론적으로 HCC의 사용으로 심폐기 사용 시간과 상관없이 추가하는 헤파린 양을 줄임으로서 총 헤파린 사용량을 줄여 줄 수 있었으며 이것이 HCC의 임상적 효과를 나타나게 하는 하나의 요소로 작용할 수 있다고 생각된다.