• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.8
• /
• pp.29-37
• /
• 2019

Textile quality management targets the physical properties of fabrics and the subjective discriminations of color and fitting. Color is the most representative quality factor that consumers can use to evaluate quality levels without any instruments. For this reason, quantification using a color discrimination device has been used for statistical quality management in the textile industry. However, small and medium-sized domestic textile manufacturers use only visual inspection for color discrimination. As a result, color discrimination is different based on the inspectors' individual tendencies and work procedures. In this research, we want to develop a textile industry-friendly quality management method, evaluating the possibility of rapid color discrimination using a digital imaging device, which is one of the office-automation instruments. The results show that an imaging process-based color discrimination method is highly correlated with conventional color discrimination instruments ($R^2=0.969$), and is also applicable to field discrimination of the manufacturing process, or for different lots. Moreover, it is possible to recognize quality management factors by analyzing color components, ${\Delta}L$, ${\Delta}a$, ${\Delta}b$. We hope that our rapid discrimination method will be a substitute technique for conventional color discrimination instruments via elaboration and optimization.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.6
• /
• pp.288-296
• /
• 2019

Radiation cooling has used ceilings or floors as cooling surfaces. In such cases, to avoid moisture condensation on the surface, the surface temperature needs be higher than the dew point temperature or an additional dehumidifier is added. In this study, with a goal for residential application, intentional moisture condensation on the cooling surface was attempted, which increased the cooling capacity and improved the indoor comfortness. This method included two separate refrigeration cycles - convection-type dehumidifying cycle and the panel cooling cycle. Test results on the panel cooling cycle showed that, at the standard outdoor ($35^{\circ}C/24^{\circ}C$) and indoor ($27^{\circ}C/19.5^{\circ}C$) condition, the refrigerant flow rate was 8.8 kg/h, condensation temperature was $51^{\circ}C$, evaporation temperature was $8.8^{\circ}C$, cooling capacity was 376 W and COP was 1.75. Furthermore, the panel temperature was uniform within $1^{\circ}C$ (between $13^{\circ}C$ and $14^{\circ}C$). As the relative humidity decreased, the cooling capacity decreased. However, the power consumption remained approximately constant. In the convection-type dehumidification cycle, the refrigerant flow rate was 21.1 kg/h, condensation temperature was $61^{\circ}C$, evaporation temperature was $5.0^{\circ}C$, cooling capacity was 949 W and COP was 2.11 at the standard air condition. When both the radiation panel cooling and the dehumidification cycle operated simultaneously, the cooling capacity of the radiation panel cycle was 333 W and that of the dehumidification cycle was 894 W, and the COP was 1.89. As the fan flow rate decreased, both the cooling capacity of the radiation panel and the dehumidification cycle decreased, with that of the dehumidification cycle decreasing at a higher rate. Finally, a possible control logic depending on the change of the cooling load was proposed based on the results of the present study.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.6
• /
• pp.460-471
• /
• 2019

The aim of this study was to examine the scale and market share of Chinese's research facility & equipment in the domestic research equipment market of basic and analytical science field for analyzing the difference of the number and amount of construction by year of acquisition, national research facility equipment standard classification code, and type of institution based on the information of the research equipment invested by the Korean government for the past 14 years. In addition, we analyzed the correlation among the year of acquisition, equipment standard classification code, and type of institution variables. As of January 1 2019, from 2005 to 2018, 50 Chinese's research facilities & equipments (main equipment with a construction cost of 30 million won or more) built in the basic and analytical science fields were selected for this study and their number of construction, amount of construction, year of acquisition, type of institution, and standard classification code were analyzed. Differences of the number and amount of construction with-in and by year of acquisition, standard classification code, and type of institution were tested using a single sample Chi-square test, Mann-Whitney U test, and Kruskal-wallis test. The correlation among the three variables was analyzed by using the Chi-square test of cross-tabulation analysis. And there was a statistically significant correlation among the year of acquisition, standard classification code, and type of institution (p<.05). Compared to the 2000s, in the 2010s, high-priced Optical Electronics/Video Equipment was installed at private universities, private enterprises, and government-affiliated research institute. Therefore, the domestic construction status of Chinese's research facility & equipment in the basic science and analytical science field is less than that of the domestic ones, but the number and the amount of construction are increasing statistically. So it is necessary for the government to be able to recognize the possibility that the Chinese's research facility and equipment can encroach on the domestic research industry market and to prepare related provision.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.5
• /
• pp.456-467
• /
• 2019

The rapid aging of South Korea is causing difficulties in meeting the man-power demands for the increasing number of elderly nursing hospitals. To cope with this gap in supply and demand, more foreign workers are now being hired to provide elderly care services. The purpose of this study is to examine the influence of the quality of the care services provided by foreign caregivers in nursing hospitals for the elderly. For this purpose, the researcher surveyed 249 senior citizens who are receiving care services from Chinese-Korean caregivers in six elderly nursing hospitals in Seoul and Gyeonggi region. The data collected from the survey were analyzed through SPSS and AMOS. The result of the analyses showed that, first, the quality factors of the care services of the caregivers at elderly nursing hospitals, such as reliability, responsibility, empathy, formality, and expertise, all turned out to have a positive correlation with the trust in, satisfaction with, and intent to revisit the institute. Second, thefluencing factors for the qualities of the care services by Chinese-Korean care givers in elderly nursing hospitals included responsiveness, materiality, and expertise, while the factors that influenced satisfaction with significance included trust, materiality, and expertise. Also, the trust in and satisfaction with the institution both influenced the intent of revisit in a positive manner. Third, the indirect effect of trust in the relationship between the quality of the care services by the Chinese-Korean care givers and satisfaction, appeared in all independent variable except for responsiveness, which was a factor of the quality of the care services. And, it was also shown that the satisfaction level had an indirect effect in the relationship between trust and revisiting intent. The result of this study implicates that, in order to cause the quality of the care service by the Chinese-Korean care givers in elderly nursing hospitals to increase the revisit rate, it would be necessary to provide a strategy to increase the levels of trust and satisfaction through a higher quality level of care services.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.1
• /
• pp.376-383
• /
• 2019

This study was conducted to investigate academic self-efficacy, critical thinking disposition, and learning motivation, which influence problem solving ability in nursing students. Data were collected from June 4, 2018 to June 29, 2018, and the final 213 data points were used for analysis. The SPSS/WIN 22.0 program was used to conduct descriptive statics, Pearson's correlation coefficient, t-tests, ANOVA, Scheffe's test and multiple regression analysis. The problem solving ability according to the general characteristics differed among residential type (F=3.930, p=0.021) and satisfaction with major (F=4.618, p=0.011). In the correlation between academic self-efficacy, critical thinking disposition, learning motivation, and problem solving ability of the subject, academic self-efficacy (r=0.573, p<0.001), critical thinking disposition (r=0.620, p<0.001), and learning motivation (r=0.563, p<0.001). The factors affecting the problem solving ability of the study subjects were major satisfaction (${\beta}=.117$, p=0.036), academic self-efficacy (${\beta}=0.314$, p<0.001), critical thinking disposition (${\beta}=0.318$, p<0.001), and learning motivation (${\beta}=0.217$, p=0.004), with an explanatory power of 45.2%. In this study, it is necessary to confirm the effects of the development of the intervention program and the application of the program, which can improve the problem solving ability of nursing students.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.1
• /
• pp.103-110
• /
• 2019

Recently, Korea has been affected by extreme weather events including extended summers and increased temperatures caused by global warming and climate change. Environmental temperature is especially important to the livestock industry because it is closely related to livestock productivity. This study was conducted to investigate the influence of different environmental temperatures on respiration rate, rectal temperature and body-surface temperature in finishing pigs. Pigs ($98.3{\pm}6.6kg$) were housed in individual cages inside an experimental chamber and exposed continuously to one of five environmental treatments ($22^{\circ}C$, $24^{\circ}C$, $26^{\circ}C$, $28^{\circ}C$, $30^{\circ}C$) for 10 days without providing additional rest time. Feed and water intake, respiration rate, rectal temperature and body-surface (head, ear, neck, back, side) temperature were measured two times daily during the experimental period. A significant increase in respiration rate from $26^{\circ}C$ and in body-surface temperature from $24^{\circ}C$ (p<0.05) was observed. At $30^{\circ}C$, the respiration rate had almost doubled and the body-surface temperature increased by about $5^{\circ}C-7^{\circ}C$. Moreover, ear skin temperature was very sensitive to environmental temperature. However, feed intake, water intake and rectal temperature did not change significantly during the experiment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.1
• /
• pp.278-283
• /
• 2019

3 kinds of fine powder, Fe-2%Ni alloy powder(N Ltd.) and Fe+2%Ni mixed powder(B Ltd. and S Ltd.), were fabricated into sintered compacts of bending strength specimens and ring type specimens by metal injection molding, debinding and controlling sintering conditions (reduction and sintering atmospheres, sintering temperature, sintering time and cooling rates). Density and magnetic properties of the sintered compacts were evaluated with the following conclusions. (1) When each compact was hold at 1123K for 3.6ks in H2 and sintered at 1623K for 14.4ks in Ar, the density of N, B and S Ltd.'s sintered compacts were measured as 96, 99 and 99%, and oxygen/carbon contents were measured as 0.0041%O/0.0006%C, 0.0027%O/0.0022%C, and 0.160%O/0.0026%C, respectively. (2) Magnetic characteristics of B Ltd. compact in Ar with the best results showed $B_{25}=14.3KG$, $B_r=7.75KG$, and $H_c=2.1Oe$, but not enough as those made by melting process. (3) Magnetic properties of B Ltd. compact which were sintered at 1673K for 14.4ks in Ar gas, and cooled at $0.83Ks^{-1}$ to 1123K and then cooled at $0.083Ks^{-1}$ down to room temperature were measured as $B_{25}=14.8KG$, $B_r=8.3KG$, and $H_c=1.3Oe$, almost similar to those made by melting process. Objected soft magnetic materials properties were obtained through sintering process by controlling sintering conditions (reduction condition, sintering atmosphere, sintering temperature and sintering time) and cooling rates.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.2
• /
• pp.425-433
• /
• 2019

In this study, a simple method of calculating the passive earth pressure coefficient, which is based on the limit equilibrium method, was proposed and the calculated earth pressure coefficients were compared with those of several researchers. The angle of the linear failure surface, which is combined with the logarithmic spiral arc, to the failure surfaces of the passive zone was derived and the whole passive thrust acting on the Rankine passive zone was considered in the proposed method instead of considering the horizontal component of passive thrust. The variations of the passive earth pressure coefficients of the proposed method showed the same tendency as that of the Coulomb's passive earth pressure coefficients with an inclined angle of backfill and internal friction angle. The magnitude of passive earth pressure coefficients of the proposed method were smaller than those of the Coulomb in almost all cases. A comparison of the passive earth pressure coefficients with the wall friction angle revealed the passive earth pressure coefficients of the proposed method to be smaller than those of the Coulomb and the differences between the two values increased with increasing internal friction angle and wall friction angle. A comparison of the passive earth pressure coefficients of the proposed method with those of the existing researchers for the considered internal friction angles of $25^{\circ}$, $30^{\circ}$, $35^{\circ}$, and $40^{\circ}$ and three wall friction angles revealed the maximum percentage differences for the Kerisel and Absi method, Soubra method, Lancellotta method, $Ant\tilde{a}o$ et al. method, Kame method, and Reddy et al. method to be 4.8%, 3.8%, 31.1%, 4.0%, 20.6%, and 12.8% respectively. The passive earth pressure coefficient and existing pressures were similar in all cases.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.3
• /
• pp.157-167
• /
• 2019

This study empirically analyzed the effects of the use of a single human resource development system in the enterprise on corporate performance using the Human Capital Enterprise Panel (HCCP) data. The results of the hierarchical regression analysis on the sales per log of job analysis use, The use of job analysis confirms that $R^2=.294$ and ${\beta}=.165$ can have a positive effect on sales per log, and Hypothesis 1 is supported. The participation in the work parallelism participation was negatively influenced by the sales per log in $R^2=.283$ and ${\beta}=-.129$, and Hypothesis 2 was rejected. This is attributed to the lack of data of 66, and it was judged that there were 45 new companies entering the company. In addition, we conducted a hierarchical regression analysis that confirms the moderating effect of the training and training obligation by using interaction variables of job analysis use and education and training obligation. It was confirmed that the use of job analysis could have a negative impact on the sales per log, and Hypothesis 3 was rejected. As the labor productivity increases, firms have supported the previous study that productivity effect is not significant because they do not want to invest in education and training. In addition, it was confirmed that the participation of the training system in the job training system could strengthen the positive sales (+). Therefore, Hypothesis 4 was supported. In order to reflect the effective aspects of job analysis, the voluntary activation of enterprises should be premised. In addition, if employing talented people with diverse backgrounds such as academic backgrounds, gender, religion, nationality, etc. and investing in human resources development through education and training focused on job analysis, recruitment of learning workers in parallel with work- It will be possible to contribute to the creation of performance.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.116-125
• /
• 2018

This study was carried out physicochemical and sensory evaluation to compare the quality characteristics of pork loins from Yorkshire, Duroc, Pietrain, and Duroc ${\times}$ Pietrain (DP). A total of 79 pigs from Yorkshire(22), Duroc(22), Pietrain(17), and DP(18) was used for the experiment. After 24 hours of cooling, pork loins were gathered and vacuum-packed from left carcasses and then the physicochemical traits and sensory evaluation were conducted. The pH of the loins from breed Pietrain was lower than those of the other breeds (p<0.01). While the moisture content of loins was higher in Pietrain than in the other breeds (p<0.01). The fat content of loins was higher in Duroc and DP than in the other breeds and lower in Pietrain than in the other breeds (p<0.01). Pietrain loins had the lowest drip loss (p<0.01) and the highest water holding capacity (p<0.01). There were no significant differences in the cooking loss and shear force of the loins among 4 breeds (p>0.05). There was a significant difference in the CIE color L*, a* and b* values of the loins from 4 breeds (p<0.01). Sensory scores of the loins were ranked lower in Pietrain in overall. The results of this study indicate that meat quality could be altered according to the breeds.